Standard Horizon CP180 owner manual Advanced Settings, INPUT/OUTPUT Nmea, Navigate

Page 77

13. ADVANCED SETTINGS

The Advanced Setup menu allows customization of many GPS functions, Alarms and NMEA interfacing.

1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2. Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the ShuttlePoint knob to the right.

While in this menu you will see many selections which are described in the next sections.

13.0INPUT/OUTPUT (NMEA)

The CP180 has 2 NMEA inputs and 3 NMEA outputs, while the CP180i has 1 NMEA inputs and 2 NMEA outputs. The CP300 has 4 NMEA inputs and 5 NMEA outputs, while the CP300i has 3 NMEA inputs and 4 NMEA outputs. The NMEA outputs can be configured to send specific NMEA messages.

NOTE

After a software upgrade the RAM is cleared and then the GPS Chart Plotter starts with the default settings.

After reset is performed the Input/Out Connections menu must be configured to allow AIS and FF520 operation.

13.1NAVIGATE

The Navigate Menu allows customization of the Coordinate System (Loran TD's), Map Datum, Map Orientation Resolution (angle the vessel has to change before the chart is redrawn) and Static Navigation. See the following table

 

 

Coordinate System

: Selections are:

 

a. TD: Loran TD

 

b. UTM: Universal Transverse Mercator Grid

 

c. ddd mm.mmm:Degrees Minutes and Thousands of Minutes

 

d. ddd mm.mm: Degrees Minutes and Hundredths of Minutes

 

e. ddd mm.ss: Degrees Minutes and Seconds (default)

Map Datum

: Allows selection of Map Datums. The default Datum is WGS84 as C-MAP cartography

 

has been compiled using the WGS84 Datum.

 

Map Orientation Resolution: Sets the angle the vessel has to change before the chart is redrawn. The default setting

 

 

is 30 degrees. Example: if the vessel is heading 000T at a speed of 25 Knots, the display

 

 

will redraw:

 

 

a. In Home mode the GPS Chart Plotter centers the location of the vessel in the center

 

 

of the display. To keep the vessel in the center of the display the GPS Chart Plotter

 

 

will occasionally redraw.

 

 

b. If the vessel changes course greater than 330T or more than 30T the chart will be

 

 

redrawn.

 

Static Navigation

: Sets up a threshold for the speed. When the speed received from the positioning device

 

 

is under that threshold, the GPS Chart Plotter displays zero. The default setting is 0.9 Kts.

The Loran TD selection allows the GPS Chart Plotter to be set up so the user can enter in LORAN TD’s directly into the GPS Chart Plotter. After the TD’s have been entered, and the user changes to ddd mm.sss (Degrees Minutes and Seconds) the TD’s will be converted to Lat / Lon coordinates.

GPS Chart Plotters

Page 79

Page 76 Page 78
Image 77
Page 76 Page 78
Contents CP180/CP180i CP300/CP300i FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen GPS Chart Plotters Table of Contents Editing a Mark Fonts & Symbols on the CP300/CP300i10.0 10.0.0Customizing the Data Windows 12.1 17.0.0 RAM Menu reset 17.0.1 DIM Menu 17.0.212.2 12.3GPS Chart Plotters Packing List IntroductionGeneral Information 0 CP300/CP300i Optional Accessories Optional Accessories0 CP180/CP180i Packing List 1 CP300/CP300i Packing ListBracket Mounting Mounting the GPS Chart PlotterGetting Started Mounting the CP180 or the CP300 External GPS Antenna CP180 and CP300 Flush MountingFlush mounting the antenna 0 Installing the GPS Waas Smart AntennaConnections 12VDC Power and Nmea PWR & ACC 1 CableConnection Table For CP180/CP180i PinSmart GPS Cable for CP180 and CP300 Wire Color DescriptionConnection Table For CP300/CP300i DC Power Connection Video ConnectorConnection For CP180/CP180i Nmea ACC 2 CableConnection of the FF520, AIS receiver, VHF and Autopilot AIS SetupConnection For CP300/CP300i Nmea Connections Battery ConnectionsOptional Black BOX Fish Finder GPS Position on a VHF RadioOutputting Nmea to a Personal Computer Other DSC VHF Manufactures11 CP300/CP300i Video Input Nmea DataVideo Camera Input VCR or DVD InputIII. Quick Activation by Soft Keys From the menuII. Quick Activation by pressing CLR for 1 second Demo Mode for Dealer USE GPS Chart Plotters Controls and Connections Controls and IndicatorsGetting Started Power On, Off and ShuttlePoint knob operationCP300/CP300i Soft Keys Home mode Cursor Vs. Home ModeCursor Mode Cursor may be changed to any of the following Cursor and Menu selection speedChanging the Ships Icon Selecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys on CP300/CP300i Selecting Pages Using Soft Keys on CP300/CP300iTime Setup Other Settings in General Setup MenuCursor Speed InformationOther Available Searches Using Find Services & More FunctionPort Services Quick Info On Lakes Info on LakesFull Info On Lakes Following is an example of Full Info on Lakes1a Example of picture associated to the Fishing object GPS Chart Plotters New Presentation Features New Data FeaturesMAP MAX Overview Inserting the C-CARDMAX and NT/NT+ C-CARD coexistence MAP Functions Fonts & Symbols on the CP300/CP300iMAX Functions Menu Zoom TypeDynamic Nav-Aids Perspective ViewZoom Boxes definition is as followsCurrents Prediction Pictures & Diagrams6 Pictures and Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Creating Marks Creating a NEW Mark Using the ChartEditing a Mark Only for CP180/180iMoving a Mark or Waypoint Deleting a Mark or WaypointFind MARKS/WAYPOINTS ListGoto Cursor Creating a NEW Mark with the User Points List4a Navigating to Cursor Example Goto MarkGPS Chart Plotters Deleting a MOB Point MAN Over Board MOB FunctionGPS Chart Plotters Routes Creating a Route Using WaypointsMaking Additional Routes Creating a Route Using Marks on the ChartWhen finished press ENT to save Press CLR to show the Chart Inserting a Waypoint Into a Route Other Settings in Route MenuGoto a Route By select RouteGPS Chart Plotters Tracking TracksUsing the Trip LOG Other Settings in Track MenuSaving and starting a new Track ENTResetting the Trip Log GPS Chart Plotters User C-CARD Menu User C-CARDFormatting the User C-CARD Transferring files to the optional User C-CARDRefreshing the User C-CARD Loading a fileDeleting a file from the User C-CARD Pages can selected in the following way PagesSelection by Menu Selection by Soft KEY only for CP300/CP300iWindow Selections ChartTurning Off Information on Icon Points Additional Functions on ChartDisplay Mode To control the display on the map of the marine features Marine SettingsLand Settings Depth SettingsChart Settings Underwater Objects SettingsNavigation Customizing Chart SettingsCustomizing the Data Windows Fix position Time Speed Over Ground Course Over Ground HighwayCompass Rose Compass Tape Fix positionGPS Status CelestialChanging date Changing to and from Daylight Savings timeChanging the Nmea page Windows Nmea DisplayInterfacing Nmea DEPTH, Wind SPEED, Temp and SOG Trend PagesVHF Digital Selective Calling Position Request DSC Distress CallGPS Chart Plotters Navigate Advanced SettingsINPUT/OUTPUT Nmea Compass AlarmsGrounding Alarm GPS Chart Plotters AIS System Definitions AISFunctions are described in the following table To SET the Chart Plotter for Receiving AISAIS Menu CPA and Tcpa values Quick Info on AIS TargetVessel Name Mmsi number Radio Call Sign SOG GPS Chart Plotters Download MAP Weather ServiceMAP Weather Service Menu Weather Forecast Copy From User C-CARDReal Time View Type of DataTrouble Shooting GPS Chart Plotters Technical Tests RAM Menu resetSystem Test DIM MenuSerial Ports Cartridges18.0 CP180/CP180i Specifications SpecificationsPower Consumption CP 520mA max @12VPower supply 18.1 CP300/CP300i SpecificationsOperating temperature range Storage temperatureGPS Waas Smart Receiver Specifications GPS Chart Plotters Appendix Terms Page Analitycal Index Power and Nmea Cable Home Mode 27, 28GPS Status Greenwich England Mean TimeRoute 28, 49, 93 GPS Chart Plotters Track Points 61, 93User Points 37, 93 Waypoint 28, 49Please Note
Related manuals
Manual 92 pages 12 b Manual 42 pages 55.96 Kb

CP180 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents