ACR Electronics RLB-36 manual Y1-03-0233 Rev. D

Page 23

Always refer battery replacement and any other beacon service to a factory authorized Service Center. Find a Center near you at http://www.acrelectronics.com/brc.htm. Battery replacement includes servicing the beacon by replacing all o-rings, testing the water seal and the electrical properties and doing a full functional test on the unit.

NOTE: There are no user serviceable items inside the beacon. Do not open the beacon except to disable (in case of faulty or accidental activation). Otherwise, always have the beacon serviced.

WARNING: Battery contains lithium

To avoid possible fire, explosion, leakage or burn hazard, do not open, recharge, disassemble or heat beacon above +70ºC (+158ºF) or incinerate.

These products contain lithium in the battery. Various beacons may or may not require special shipping instructions due to the lithium batteries and changes in shipping regulations. Shipping of hazardous materials requires special handling and documentation. MSDS sheets, along with shipping information, can be found on our website at http://www.acrelectronics.com/hazmat/default.htm.

In the case of the RLB-36, the product contains small batteries that are non- hazardous. However, regulations can change. Be advised that it is best to verify the shipping requirements at the time you are preparing to ship the unit.

4.Shore based maintenance for SOLAS vessels, (SBM) IMO MSC/Circ. 1039

The Maritime Safety Committee has approved guidelines for shore-based maintenance of satellite beacons, for the purpose of establishing standardized procedures and minimum levels of service for the testing and maintenance of satellite beacons. The first shore based maintenance on all ACR EPIRBs is due at the date of the first battery replacement. Visit ACR’s website at www.acrelectronics.com for organizations that perform shore based maintenance.

5.Annual testing for SOLAS vessels, IMO MSC/Circ. 1040

SOLAS regulation IV/15.9 dictates annual testing of 406 MHz satellite EPIRBs. Testing should be carried out using suitable test equipment capable of performing the relevant measurements. All checks of electrical parameters should be performed in the self-test mode, if possible. These tests can be performed by certified ACR Battery Replacement Centers (BRCs). Visit ACR’s website at www.acrelectronics.com for authorized ACR BRCs.

Y1-03-0233 Rev. D

22

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Owner Vessel Radio Call Sign UIN # Page Table of Contents Step ONE Registering Your Beacon Suitland Road Suitland, MD What country should I register in?How do I register? Noaa Sarsat Beacon RegistrationDo I need a radio license? How your beacon brings help Step TWO HOW the Beacon WorksInternal GPS engine Anatomy of your beacon Activation switch with Witness TabExternal GPS interface Top View Switch PositionsCategory 2 LowPro3 Bracket Category 1 SeaShelter3 BracketGPS √ Digital DisplayActivating your beacon Y1-03-0233 Rev. D Y1-03-0233 Rev. D Turning off the beacon False alarmsY1-03-0233 Rev. D Mounting location Step Three Installing the BeaconPage Category I bracket Category II bracket Installing the optical interface to an external GPS receiver On a routine basis aboard ship, do Routine beacon maintenanceBattery replacement Step Four Maintaining the BeaconY1-03-0233 Rev. D Servicing the SeaShelter3 and the HydroFix HRU Changing ownership or contact informationTo remove the expired HRU To install the new HRUServicing the LowPro3 Self-Testing the beaconExtended GPS test How the external GPS interface works Appendix a Using and Testing the GPS SystemsUsing the external GPS interface Testing the external GPS interfaceLED indication of GPS fix Internal GPS position systemCompatible GPS receivers Appendix B User Interface Special IconsAppendix C User Interface Digital Display During Operation GPS Weak Give Clear View SKY GPS Data XX.XXX’Keep Epirb Right Leave Epirb Until RES QBoard Test  Appendix D User Interface Digital Display During SELF-TESTBatt Board Test √Light Test  GPS Test √GPS Test  Light Test √Batt LOW Self Test FailSee User Book Seek FIX NOWTest END Long GPS Data Test StartGPS Test English French Spanish German Italian Phrases Appendix F- User Interface Language TranslationsGeneral overview Appendix G the COSPAS-SARSAT SystemGENERAL/ Environmental Appendix H Technical SpecificationsLimited Warranty Appendix I WARRANTY, Useful Life POLICY, Notices0735 EC Declaration of ConformityRepresentative International Maritime Organization Shore Based Maintenance

Y1-03-0233, RLB-36 specifications

The ACR Electronics RLB-36, identified by model number Y1-03-0233, is a remarkable beacon that exemplifies state-of-the-art survival technology designed for maritime, aviation, and outdoor enthusiasts. It represents a commitment to safety and reliability when it matters most.

One primary feature of the RLB-36 is its powerful strobe light, which emits a bright signal visible from considerable distances, making it an essential device for emergency signaling. The high-intensity LED strobe operates in various lighting conditions, ensuring visibility day or night. With a robust construction that withstands harsh environments, the RLB-36 is built to last, offering peace of mind to users who may find themselves in perilous situations.

The RLB-36 is designed with advanced technologies aimed at enhancing user experience and functionality. It includes features like Global Positioning System (GPS) integration, which allows for precise location tracking, an invaluable asset during rescue operations. The device can send out distress signals that include location data, expediting search and rescue efforts significantly.

Additionally, the RLB-36 has a user-friendly interface, allowing for quick activation in emergencies. The device is lightweight and compact, making it easily portable, which is crucial for those who venture into remote areas for activities such as boating, hiking, or flying. Its durable design also includes waterproof capabilities, effectively protecting it from the elements.

Another noteworthy characteristic of the RLB-36 is its long battery life. It utilizes efficient power management technology, ensuring that it remains operational for extended periods, crucial in emergencies when time is of the essence. The device is also equipped with a maintenance-free design, which means users can rely on its readiness without frequent checks or upkeep.

In summary, the ACR Electronics RLB-36, model Y1-03-0233, is not just a beacon; it is a lifeline defined by cutting-edge technology and rugged design. Its array of features—including a powerful strobe, GPS integration, lightweight construction, waterproof capabilities, and extended battery life—places it at the forefront of emergency signaling devices. Whether in the wilderness or out at sea, the RLB-36 ensures that help is never too far away.
Top Page Image Contents