ACR Electronics RLB-36, Y1-03-0233 Installing the optical interface to an external GPS receiver

Page 21

5.Installing the optical interface to an external GPS receiver

The beacon is fitted with an optical interface to connect with an external Global Positioning System (GPS) receiver that will determine the latitude and longitude of its position.

The black lead wire with white stripes should be connected to the output of the external GPS receiver positive transmitter pin. The black wire should be connected to the negative pin.

If you have a Category I beacon and bracket, the connector is at the end of the black lead wire plugs into the beacon via the bezel on the top of the beacon. See the location of the GPS interface in previous figures (“Anatomy of your beacon”, page 7 and “Top View”, page 8). It is important to seat the connector completely in the bezel for an operational connection.

If you have a Category II beacon and bracket, your connector has two extensions on it that must be aligned with the two notches on the Category II beacon bezel. The connector is then gently inserted downward into place and turned 90° to lock the connector into the bezel.

If the external GPS receiver is operational and the connection has been correctly made to the optical interface, the green LED in the optical interface will start flashing at activation.

NOTE: The baud rate output for your GPS receiver NMEA 0183 should be 4800 bps. If you are not sure if your receiver is NMEA 0183 compliant, check the interface settings listed in your GPS manual. To optimize your GPS interface feature, be sure that your GPS receiver is equipped with a NMEA 0183 Version 1.5 or higher with GPGGA sentence enabled.

Consult your GPS receiver manual for the maximum cable length acceptable for an external GPS connection to the beacon. Also see Appendix A for information regarding the use and testing of your GPS system in conjunction with the beacon.

Using the optical interface is not necessary for the beacon to function properly; it will, however, enhance the beacon’s performance.

Y1-03-0233 Rev. D

20

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Owner Vessel Radio Call Sign UIN # Page Table of Contents Step ONE Registering Your Beacon How do I register? What country should I register in?Noaa Sarsat Beacon Registration Suitland Road Suitland, MDDo I need a radio license? How your beacon brings help Step TWO HOW the Beacon WorksAnatomy of your beacon Activation switch with Witness Tab External GPS interfaceInternal GPS engine Top View Switch PositionsCategory 2 LowPro3 Bracket Category 1 SeaShelter3 BracketGPS √ Digital DisplayActivating your beacon Y1-03-0233 Rev. D Y1-03-0233 Rev. D Turning off the beacon False alarmsY1-03-0233 Rev. D Mounting location Step Three Installing the BeaconPage Category I bracket Category II bracket Installing the optical interface to an external GPS receiver Battery replacement Routine beacon maintenanceStep Four Maintaining the Beacon On a routine basis aboard ship, doY1-03-0233 Rev. D Servicing the SeaShelter3 and the HydroFix HRU Changing ownership or contact informationTo remove the expired HRU To install the new HRUServicing the LowPro3 Self-Testing the beaconExtended GPS test Using the external GPS interface Appendix a Using and Testing the GPS SystemsTesting the external GPS interface How the external GPS interface worksLED indication of GPS fix Internal GPS position systemCompatible GPS receivers Appendix B User Interface Special IconsAppendix C User Interface Digital Display During Operation GPS Weak Give Clear View SKY GPS Data XX.XXX’Keep Epirb Right Leave Epirb Until RES QBatt Appendix D User Interface Digital Display During SELF-TESTBoard Test √ Board Test GPS Test  GPS Test √Light Test √ Light Test See User Book Self Test FailSeek FIX NOW Batt LOWLong GPS Data Test Start GPS TestTest END English French Spanish German Italian Phrases Appendix F- User Interface Language TranslationsGeneral overview Appendix G the COSPAS-SARSAT SystemGENERAL/ Environmental Appendix H Technical SpecificationsLimited Warranty Appendix I WARRANTY, Useful Life POLICY, Notices0735 EC Declaration of ConformityRepresentative International Maritime Organization Shore Based Maintenance

Y1-03-0233, RLB-36 specifications

The ACR Electronics RLB-36, identified by model number Y1-03-0233, is a remarkable beacon that exemplifies state-of-the-art survival technology designed for maritime, aviation, and outdoor enthusiasts. It represents a commitment to safety and reliability when it matters most.

One primary feature of the RLB-36 is its powerful strobe light, which emits a bright signal visible from considerable distances, making it an essential device for emergency signaling. The high-intensity LED strobe operates in various lighting conditions, ensuring visibility day or night. With a robust construction that withstands harsh environments, the RLB-36 is built to last, offering peace of mind to users who may find themselves in perilous situations.

The RLB-36 is designed with advanced technologies aimed at enhancing user experience and functionality. It includes features like Global Positioning System (GPS) integration, which allows for precise location tracking, an invaluable asset during rescue operations. The device can send out distress signals that include location data, expediting search and rescue efforts significantly.

Additionally, the RLB-36 has a user-friendly interface, allowing for quick activation in emergencies. The device is lightweight and compact, making it easily portable, which is crucial for those who venture into remote areas for activities such as boating, hiking, or flying. Its durable design also includes waterproof capabilities, effectively protecting it from the elements.

Another noteworthy characteristic of the RLB-36 is its long battery life. It utilizes efficient power management technology, ensuring that it remains operational for extended periods, crucial in emergencies when time is of the essence. The device is also equipped with a maintenance-free design, which means users can rely on its readiness without frequent checks or upkeep.

In summary, the ACR Electronics RLB-36, model Y1-03-0233, is not just a beacon; it is a lifeline defined by cutting-edge technology and rugged design. Its array of features—including a powerful strobe, GPS integration, lightweight construction, waterproof capabilities, and extended battery life—places it at the forefront of emergency signaling devices. Whether in the wilderness or out at sea, the RLB-36 ensures that help is never too far away.
Top Page Image Contents