ACR Electronics RLB-36 manual Y1-03-0233 Rev. D

Page 14

Category I and II Beacons-Manual deployment and activation

Both Category I and II beacons can be manually deployed by removing the beacon from the bracket.

Once removed, the beacon can be activated by placing it in water OR by lifting the Activation Switch to a vertical position, sliding it toward the antenna and pushing down to the opposite side of the beacon. Activating the beacon in this manner breaks off the Activation Witness Tab and allows the switch to properly seat, showing the “ ▌ “ symbol (ON).

A Category I or II beacon MANUALLY activates with the following sequence: 1.) Remove the beacon from its bracket

2.) Activation method one: Place beacon in water

3.) Activation method two:

//Lift the switch to a vertical position

//Slide the switch toward the antenna

//Push the switch down to the opposite side of the beacon (see illustration below)

Category I and II Beacons-Manual Activation Without Deployment

The beacon can be manually activated while still in its bracket by placing the Activation Switch in the ON position. Activation by this method overrides all sensors and turns the beacon “ON.”

Push the main switch up 90 degrees, slide toward antenna and all the way down to activate.

Witness tab will break once placed in the “ON” position

Y1-03-0233 Rev. D

13

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Owner Vessel Radio Call Sign UIN # Page Table of Contents Step ONE Registering Your Beacon Noaa Sarsat Beacon Registration What country should I register in?How do I register? Suitland Road Suitland, MDDo I need a radio license? Step TWO HOW the Beacon Works How your beacon brings helpInternal GPS engine Anatomy of your beacon Activation switch with Witness TabExternal GPS interface Switch Positions Top ViewCategory 1 SeaShelter3 Bracket Category 2 LowPro3 BracketDigital Display GPS √Activating your beacon Y1-03-0233 Rev. D Y1-03-0233 Rev. D False alarms Turning off the beaconY1-03-0233 Rev. D Step Three Installing the Beacon Mounting locationPage Category I bracket Category II bracket Installing the optical interface to an external GPS receiver Step Four Maintaining the Beacon Routine beacon maintenanceBattery replacement On a routine basis aboard ship, doY1-03-0233 Rev. D Changing ownership or contact information Servicing the SeaShelter3 and the HydroFix HRUTo install the new HRU To remove the expired HRUSelf-Testing the beacon Servicing the LowPro3Extended GPS test Testing the external GPS interface Appendix a Using and Testing the GPS SystemsUsing the external GPS interface How the external GPS interface worksInternal GPS position system LED indication of GPS fixAppendix B User Interface Special Icons Compatible GPS receiversAppendix C User Interface Digital Display During Operation GPS Data XX.XXX’ GPS Weak Give Clear View SKYLeave Epirb Until RES Q Keep Epirb RightBoard Test √ Appendix D User Interface Digital Display During SELF-TESTBatt Board Test Light Test √ GPS Test √GPS Test  Light Test Seek FIX NOW Self Test FailSee User Book Batt LOWTest END Long GPS Data Test StartGPS Test Appendix F- User Interface Language Translations English French Spanish German Italian PhrasesAppendix G the COSPAS-SARSAT System General overviewAppendix H Technical Specifications GENERAL/ EnvironmentalAppendix I WARRANTY, Useful Life POLICY, Notices Limited WarrantyEC Declaration of Conformity 0735International Maritime Organization Shore Based Maintenance Representative

Y1-03-0233, RLB-36 specifications

The ACR Electronics RLB-36, identified by model number Y1-03-0233, is a remarkable beacon that exemplifies state-of-the-art survival technology designed for maritime, aviation, and outdoor enthusiasts. It represents a commitment to safety and reliability when it matters most.

One primary feature of the RLB-36 is its powerful strobe light, which emits a bright signal visible from considerable distances, making it an essential device for emergency signaling. The high-intensity LED strobe operates in various lighting conditions, ensuring visibility day or night. With a robust construction that withstands harsh environments, the RLB-36 is built to last, offering peace of mind to users who may find themselves in perilous situations.

The RLB-36 is designed with advanced technologies aimed at enhancing user experience and functionality. It includes features like Global Positioning System (GPS) integration, which allows for precise location tracking, an invaluable asset during rescue operations. The device can send out distress signals that include location data, expediting search and rescue efforts significantly.

Additionally, the RLB-36 has a user-friendly interface, allowing for quick activation in emergencies. The device is lightweight and compact, making it easily portable, which is crucial for those who venture into remote areas for activities such as boating, hiking, or flying. Its durable design also includes waterproof capabilities, effectively protecting it from the elements.

Another noteworthy characteristic of the RLB-36 is its long battery life. It utilizes efficient power management technology, ensuring that it remains operational for extended periods, crucial in emergencies when time is of the essence. The device is also equipped with a maintenance-free design, which means users can rely on its readiness without frequent checks or upkeep.

In summary, the ACR Electronics RLB-36, model Y1-03-0233, is not just a beacon; it is a lifeline defined by cutting-edge technology and rugged design. Its array of features—including a powerful strobe, GPS integration, lightweight construction, waterproof capabilities, and extended battery life—places it at the forefront of emergency signaling devices. Whether in the wilderness or out at sea, the RLB-36 ensures that help is never too far away.
Top Page Image Contents