REAR PANEL VIEW
BALANCED INPUTS
LINE INSTRUMENT
MIC PASS THRU
BALANCED OUTPUTS
LEFTRIGHT
MIC INPUT
DIGITAL I/O
DI
S/PDIF
DO
| MIDI |
| PEDAL |
IN | THRU | OUT | IN |
MIC IN
MIC LEVEL -20dB SELECT LIMITER +48V
CAUTION |
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
WARNING |
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE
AVIS: RISQUE DE CHOC
OUVRIR.
THIS CLASS B DIGITAL DEVICE MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE- CAUSING EQUIPMENT REGULATIONS AND COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION SUBJECT TO CONDITIONS STATED IN THE MANUAL.
SERIAL NO.
TYPE: TFW001
MADE IN THAILAND
UL60065
EN/IEC 60065
RCSA file no: LR 108093
CUS
1 - Line Input
Input for line instruments such as keyboards etc. Connection type: 1/4” jack.
2 - Instrument Input Input for:
-Guitar pedal or preamp
-Active pickups (guitar with batteries)
-Acoustic guitar with preamp
-Keyboard output
Connection type: 1/4” jack.
3/4 - Balanced Outputs
Balanced outputs on 1/4” TRS jack. These outputs may be connected directly to balanced mic inputs with 1/4”TRS to XLR adapters.
WARNING! When connecting the 
outputs to microphone inputs on a mixing console, the phantom power for these channels MUST be switched off! Otherwise you may damage the
5 - Digital I/O - S/PDIF
Sends and receives digital audio to S/PDIF standards on standard RCA connectors.
6 / 7 / 8 - MIDI In / Thru / Out Standard MIDI interface.
9 - Pedal In
Several types of external pedals can be connected and used to control parameters.
-Connect an expression or a volume pedal to control e.g. volume
For perfect response when using an expression or a volume pedal, the pedal must be calibrated. This is done via the pedal menu
-Via the pedal menu you can set up what parameter the expression/volume pedal should control
9