TC electronic SDN BHD G-Natural user manual Master, Calibrating

Page 20

MENU - PEDAL

Master

If an expression pedal is connected to the pedal input and a preset is recalled, G-Natural can be set up to respond to either the current position of an expression pedal or to the value stored with the preset.

Preset: The parameter value stored as part of the preset applies – regardless of the current position of the expression pedal.

Pedal: The position of the expression pedal is identified at the moment of preset change, and the value stored as part of the preset is discarded.

Calibrating

In order to secure the best performance of your expression pedal, G-Natural must be calibrated to this pedal. Follow this step by step guide.

•Make sure that you have connected your pedal to the pedal connector on the rear panel

•Select “Calibrate from the Pedal Menu

 

PEDAL MENU

 

 

CALIBRATE

<menu>

 

 

 

• Press MENU

 

• The LCD now reads

 

 

 

 

 

PEDAL CALIBRATE

 

 

Set Min: 0

<menu>

 

 

 

•Place your pedal in minimum position (“Heel down”) and press MENU

•The LCD now reads

PEDAL CALIBRATE

 

Set Max:

0

<menu>

•Place your pedal in maximum position (Toe down) and press MENU

•The LCD reads: “CALIBRATION DONE”

PEDAL CALIBRATE

> CALIBRATION DONE <

18

Page 19 Page 21
Image 20
Page 19 Page 21
Contents User’s Manual Page Service VoltageEMC / EMI & Certificate of Conformity For Customers in CanadaTable of Contents Page Features IntroductionOverview Operation Delay PresetBoost / Tap Tempo / Hold for Tuning LevelsRear Panel View Power Mic Pass ThruMic Input Mic Level knobTypical Setups Basic settingsGuitar with piezo pick-up ConnectionsDefault Store Levels Menu Guitar with piezo pick-up and dynamic microphoneGuitar with piezo pick-up + vocal microphone Factory Default Natural with a dedicated acoustic guitar ampNatural in a studio Audio intefaceMenu Routing RoutingsBasics Semi Parallel SerialMenu Pedal PedalMaster CalibratingMenu Utility UtilityMenu Levels Levels menuDither Volume Position Range Pre or PostDigital InGain Boost Essential parameters for the Boost switchBoost Function Tuner Effects Compressor CompressorNatural compressors Studio TypeNatural EQs and Noise Gates Effects EQStomp Type Effects Noise Gate & Boost Noise GateMode Threshold Range -60dB to 0dBVibrato Effects MODDetune Tremolo TypeFeedB FeedBack Range -100 to ChorusFlanger Delay Types Effects ReverbReverb Types Common Reverb ParametersSpill-over Effects DelayDelay Parameters Technical Specifications Digital Inputs and Outputs Supplementary
Top Page Image Contents