TC electronic SDN BHD G-Natural user manual Guitar with piezo pick-up + vocal microphone

TYPICAL SETUPS

Guitar with piezo pick-up + vocal microphone

MIXER

LR outputs

Guitar with an

active pick-up system

Instrument input

Microphone input

algorithm select
VARIATIONS						factory
hold to save		1	2	3	4
						default	store	levels	menu
			thicken		clean
			detune		analog	Decay	PreDly	Color	MixMM
			vibrato	spring	tape
			tremolo	hall	dynam	1.2s	250ms	100%	25%
studio			chorus	room	reverse
stomp	EQ	boost	flanger	plate	p.pong	edit A	edit B	edit C	edit D
comp	EQ	boost	mod	reverb	delay	subdiv

COMP	MOD	DELAY	REVERB
	BANK UP
1	2	3	BOOST
			/TAP TEMPO
	BANK DN		G•NATURAL

As explained in the previous example G-Natural can handle both a dynamic or condenser microphone and an active* piezo pick-up system as found is many acoustic guitars. In this setup example the microphone is used for vocals.

Connections

•Connect the output of your guitars piezo pickup to the Instrument input of G-Natural

•Connect the microphone to the mic input of G-Natural

•Connect L/R outputs to a mixer or to a dedicated acoustic guitar amp

*If the pickup system requires the use of a battery the system is active.

WARNING! When connecting the G-Natural outputs to microphone inputs on a mixing console, the phantom power for these channels MUST be switched off! Otherwise you may damage the G-Natural circuits.

Basic settings

•If a condenser microphone is used you must enable the +48V phantom power

•Set input sensitivity via the Levels menu

•Select active effect pressing the COMP, MOD, DELAY and REVERB switches

•G-Natural feature separate EQ and compression settings for mic and instrument inputs

13