Tascam CD-RW900SL Track search, Selecting by track number, Normal search, Direct search

Page 17

4 − Playback operations

Selecting by track number

Using the number keys on the remote control, the number of the desired track can be entered directory. Even numbers with two or three digits can be entered easily. For example:

Track 9: press ‘9’ and 009 will be displayed.

Track 12: press ‘1’ and ‘2’ and 012 will be displayed.

Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.

After input, press the PLAY key to start playback. Or, the READY key to cue the track at its head position and enter playback standby mode.

You can also enter the track number and start playback by pushing the MULTI JOG dial or using the ENTER key.

NOTE

This function cannot be used in Program or Random mode.

Track search

Normal search

Press the ∆/˚ search key continuously on the front panel, or the SEARCH ∆/˚ key on the remote control. To stop the search function, simply release the ∆/˚ or the SEARCH key.

NOTE

The search function does not operate with MP3 discs.

Direct search

By specifying time from the start of a certain track, you can start playback from a specified point of a specified track.

ªBasic operation

During stop, play or playback standby modes, use the number keys on the remote control to input the three-digit track number (such as 002 for track 2), then the desired elapsed time (***min **sec) from the start of that track.

Example: To specify 1 min 30 sec from the start of track 2, input “002 001 30”.

During input, the counter in the display will flash.

NOTE

Regardless of the time display mode (see “Time display switching on page 19), the time from the start of the specified track is displayed.

Pressing the CLEAR key cancels the input at any stage during input.

During stop or playback modes, when the final digit is entered, the desired position is automatically located and playback will begin from the desired point. During play- back standby mode, at the desired point the unit will enter playback standby mode.

NOTE

If a point which does not exist is entered, Direct Search time entry mode will be cancelled.

The direct search function cannot be used in program or random mode.

For MP3 discs, time cannot be specified within a track. However, if you input the three-digit track number, playback will begin from the start of that track.

Operation variations

Even if the final “seconds” time value is not input, play- back will begin from the selected “minutes” time after pressing the ENTER or PLAY key. Or, if you press the READY key, the unit will enter the playback standby mode at the selected point.

ªSpecifying a track number only

After inputting the track number, press the ENTER or PLAY key to begin playback of that track, or the READY key to cue the track and enter playback standby mode.

NOTE

Instead of inputting the three-digit track number, you can input only the desired track number.

Example: To specify track 3, input only “3”.

ªSpecifying to the minute

After inputting the three-digit track number and the number of minutes after the start of the track, press the ENTER or PLAY key to begin playback of that track, or the READY key to cue the track and enter playback standby mode.

Example: To specify 1 min 00 sec from the start of track 2, input “002 001”

NOTE

Following the above example, if “0021” is input, the same position will be located.

TASCAM CD-RW900SL 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CD-RW900SL Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents − Introduction Supplied accessoriesRack-mounting the unit About this manualRecordable discs About CD-R and CD-RW discsAbout finalizing Never use a stabilizer or printable discs Environmental considerationsHandling of compact discs Beware of condensation Use of the remote control unitBatteries Inserting batteriesFront panel − Features of the CD-RW900SLRear panel Display RC-RW900SL Remote control unit − Menu operation Menu configurationOperation basics − Playback operations Using the skip functionDiscs for playback Simple playback operationsSelecting by track number Track searchNormal search Direct searchContinuous playback Playback modesSingle-track playback Random playbackRepeat playback Time display switchingTimer playback Auto Cue function To B repeat playbackAuto Ready function Pitch control functionPlaying back MP3 files Key control functionMP3 action setting Directory playback settingAbout MP3 track data SkipInput selection − RecordingInput monitoring Frequency conversionFull disc Basic recordingTime display while recording Fade-in and fade-out recording Advanced recordingSynchronized recording Sync recordingAutomatic track division To enable or disable automatic track divisionManually divide track DD digital directRestricting the number of tracks Rec mute functionUnfinalizing CD-RW discs − After recordingFinalizing Refreshing a disc ErasingErasing tracks Erasing a whole discTitle input operation − TitlingDisc title input Track title inputKeyboard type setting Using a keyboard with the CD-RW900SLTitle input by keyboard Other keyboard operationsMessages during operations − Reference and specificationsError messages Troublshooting Symptom Possible cause and remedySpecifications Dimensional drawing CD-RW900SL
Top Page Image Contents