7 − Titling
Titles can be given to the disc and the tracks on the disc, using the TEXT EDIT option on the TEXT
NOTE
the titles will not have be added. You must finalize the disc to save the titles.
After a new title is selected and entered on the disc, TOC will light up on the display. If the power is turned off, the TOC has not been recorded on the disc and
Title input operation
Follow the guidelines below to input titles on the screen. Operate them when in the text edit mode.
It is more efficient to connect a keyboard for title input ( see “Title input by keyboard” on page 31).
Select the type of character for input
Press the DISPLAY key on the unit or the remote control to select from two different types of characters.
Lower case letters/code: no indication
Capital letters/code: CAPS
Input procedure
Rotate the MULTI JOG dial or the SKIP key on the remote control to get the desired characters on the display.
Push the MULTI JOG dial or press the ENTER key on the remote control to enter.
To move the cursor position
Use the ∆/˙ key and the ˚/¥ key on the front panel, or the SEARCH key on the remote control.
To delete characters
Place the cursor on the character, then press the ERASE/DEL key on the front panel, or the ERASE key on the remote control.
To insert characters
Move the cursor to the location where you wish to insert a character, and press the FINALIZE/INS key on the front panel or the FINALIZE key on the remote control.
To change a character
Place the cursor on the character to be changed, then input the desired character.
NOTE
As with the TEXT menu, if you attempt to eject the disc without writing the TOC to the disc, the display will show Sure? Text!. If you want to eject the disc without performing a TOC write, press the EJECT key while “Sure Text!” is shown on the display. The text that have been edited or entered will be abandoned.
The disc or track title on a finalized disc cannot be edited. Unfinalizing
Disc title input
1.While stopped, select the TEXT EDIT option in the TEXT
2.Press the MULTI JOG dial or the ENTER key on the remote control.
Now, you can input or edit the disc title following the guidelines above.
3.Press the MENU key to enter.
If you want to cancel, press the STOP key.
Track title input
1.While stopped, select the TEXT EDIT option in the TEXT
2.Rotate the MULTI JOG dial or repeatedly press the SKIP keys on the remote control to select the track number you wish to title.
3.Push the MULTI JOG dial or press the ENTER key on the remote control.
Now, you can input or edit the track title following the guidelines above.
4.Press the MENU key to enter.
If you want to cancel, press the STOP key.
30 TASCAM