Tascam CD Rewritable Recorder Playback modes, Continuous playback, Single-track playback

Page 18

4 − Playback operations

Playback modes

There are four different playback modes. The selected mode will be indicated on the left of the display.

•Continuous playback mode (default setting): no indica- tion lamp

•Single playback mode: SINGLE is lit

•Program playback mode: PROGRAM red lamp is lit

•Random playback mode: RANDOM red lamp is lit

The playback mode can be selected using the PLAY MODE key on the remote control unit. Pressing the key changes the playback mode on the display in the following order:

Continue®Single®Program®Random

You can also select the playback mode using the PLAY MODE option in the PLAY sub-menu (see “Operation basics” on page 15). Turning the MULTI JOG dial clock-

wise changes the playback mode shown on the display in the following order:

Mode>Cont®Mode>Single®Mode>Program®Mode>Random

Pressing the MENU key or pushing the MULTI JOG dial returns to normal mode from the menu mode.

While the mode can be changed from any playback mode, the explanation in this manual will assume the user is starting from the Continuous mode.

NOTE

The selected playback mode remains after power is turned off. However, the program playback mode will be cleared to “Continuous” mode when the power is turned off.

Continuous playback

Programing is cancelled, and playback continues in the normal order.

1.When stopped, set the mode to display Continue or

Mode>Cont.

2.Press the PLAY key to begin playback in order of the track number.

Single-track playback

This function enables playback of just a single track.

1.When stopped, set the mode to display Single or

Mode>Single.

2.Use the SKIP key or the number keys (0~9) on the

remote control to select the desired track. The MULTI JOG dial can be used to select the track also.

3.Press the PLAY key to begin playback.

After the selected track finishes, playback stops.

Random playback

In this mode, the unit will play back all the tracks on the disc in completely random order, regardless of track number.

When stopped, set the mode to display Program or Mode>Random. Press the PLAY key and random playback will begin.

NOTE

Even when the power is turned off, the unit will remain in Random mode.

Program playback

This function enables playback of selected tracks in any desired order. Up to 99 tracks can be selected for program playback.

1.When stopped, set the mode to display Program or

Mode>Program.

2.Use the number keys (0~9) on the remote control unit to select each desired track for program play- back, then press the ENTER key.

You can also rotate the MULTI JOG dial to select the track number and push to enter.

The track number will be entered into the program.

Repeat the above step 2 until the desired program is complet- ed. As the program is being created, the program number and total program playing time is revised on the display.

NOTE

If the CLEAR key is pressed, the programmed track will be deleted from the last.

3.When program setting is completed, press the PLAY key to begin playback of the tracks in the programmed order.

NOTE

If the STOP key is pressed without first pressing the PLAY key, all the program data will be erased.

18 TASCAM CD-RW900SL

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CD-RW900SL Important Safety Precautions Important Safety Instructions Safety Information Optical pickupContents Rack-mounting the unit Supplied accessories− Introduction About this manualAbout CD-R and CD-RW discs About finalizingRecordable discs Environmental considerations Handling of compact discsNever use a stabilizer or printable discs Batteries Use of the remote control unitBeware of condensation Inserting batteries− Features of the CD-RW900SL Front panelRear panel Display RC-RW900SL Remote control unit Menu configuration − Menu operationOperation basics Discs for playback Using the skip function− Playback operations Simple playback operationsNormal search Track searchSelecting by track number Direct searchSingle-track playback Playback modesContinuous playback Random playbackTime display switching Timer playbackRepeat playback Auto Ready function To B repeat playbackAuto Cue function Pitch control functionKey control function Playing back MP3 filesAbout MP3 track data Directory playback settingMP3 action setting SkipInput monitoring − RecordingInput selection Frequency conversionBasic recording Time display while recordingFull disc Synchronized recording Advanced recordingFade-in and fade-out recording Sync recordingManually divide track To enable or disable automatic track divisionAutomatic track division DD digital directRec mute function Restricting the number of tracks− After recording FinalizingUnfinalizing CD-RW discs Erasing tracks ErasingRefreshing a disc Erasing a whole discDisc title input − TitlingTitle input operation Track title inputTitle input by keyboard Using a keyboard with the CD-RW900SLKeyboard type setting Other keyboard operations− Reference and specifications Error messagesMessages during operations Symptom Possible cause and remedy TroublshootingSpecifications Dimensional drawing CD-RW900SL
Top Page Image Contents