Tascam CD-RW900SL, CD Rewritable Recorder Time display switching, Timer playback, Repeat playback

Page 19

4 − Playback operations

When stopped, if the playback mode is switched to another, all the program data will be erased.

The programmed play order is not memorized when power is turned off.

In this mode, if there are no tracks programed, the CD-RW900SL will not start playback.

If an attempt is made to enter more than 100 program steps, the message PGM Full! appears on the display.

If the total program playing time exceeds 999 min 59 sec, --- : -- appears on the display.

Time display switching

When the TIME key on the front panel or the remote control is pressed, the time display will switch through several modes on the display.

•Elapsed track time (no display light indication)

•Remaining track time (REMAIN is lit in the display)

•Elapsed disc time (TOTAL is lit in the display)

•Remaining disc time (TOTAL and REMAIN are lit in the display)

When stopped, the total recording time is shown, regard- less of the status of the TOTAL and REMAIN indicators.

NOTE

In program mode, pressing the TIME key displays the elapsed and the remaining time of the whole program.

When playing an MP3 disc, elapsed track time is always displayed, and the TIME key cannot be used.

For details on time display during recording, please refer to “Time display while recording” on page 24.

Even when power is turned off, the time display mode setting is retained.

Timer playback

By using an external timer, you can set the CD-RW900SL to play the loaded disc automatically when the unit is turned on by the timer.

1.First, plug the power cord of the CD-RW900SL into the power outlet of the timer.

2.Load a disc into the unit.

3.Switch the TIMER switch on PLAY to enable timer function on for the desired deck.

When Timer playback has been turned on, the timer icon lights up in the display.

Timer indicator

NOTE

The indicator flashes when a disc is not loaded into the unit.

4.Set the timer to the desired time. Consult the timer’ s operation manual for details. At the set time, the power to the CD-RW900SL will be turned on, and playback will automatically begin.

Repeat playback

1.Press the REPEAT key to turn on the repeat mode.

In this mode, all the tracks on the disc are played continuously. The display shows Repeat ON and the indicator lights up REPEAT.

During playback, if the repeat mode is turned on, playback continues as before, and when the last track finishes, playback resumes from the first track.

If the repeat mode is turned on when the deck is stopped, press the PLAY key to begin operation.

2.Press the REPEAT key again to turn off repeat mode. Repeat OFF appears then the REPEAT indicator turns off.

NOTE

Combining the repeat mode with the program, Single-track playback and Random playback functions will enable Program repeat, Single-track repeat and Random repeat operations, respectively.

Settings for the repeat playback mode remain after power is turned off, except the specified A-B section (see “A to B repeat playback” on page 20).

TASCAM CD-RW900SL 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CD-RW900SL Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents About this manual Supplied accessories− Introduction Rack-mounting the unitAbout finalizing About CD-R and CD-RW discsRecordable discs Handling of compact discs Environmental considerationsNever use a stabilizer or printable discs Inserting batteries Use of the remote control unitBeware of condensation BatteriesFront panel − Features of the CD-RW900SLRear panel Display RC-RW900SL Remote control unit − Menu operation Menu configurationOperation basics Simple playback operations Using the skip function− Playback operations Discs for playbackDirect search Track searchSelecting by track number Normal searchRandom playback Playback modesContinuous playback Single-track playbackTimer playback Time display switchingRepeat playback Pitch control function To B repeat playbackAuto Cue function Auto Ready functionPlaying back MP3 files Key control functionSkip Directory playback settingMP3 action setting About MP3 track dataFrequency conversion − RecordingInput selection Input monitoringTime display while recording Basic recordingFull disc Sync recording Advanced recordingFade-in and fade-out recording Synchronized recordingDD digital direct To enable or disable automatic track divisionAutomatic track division Manually divide trackRestricting the number of tracks Rec mute functionFinalizing − After recordingUnfinalizing CD-RW discs Erasing a whole disc ErasingRefreshing a disc Erasing tracksTrack title input − TitlingTitle input operation Disc title inputOther keyboard operations Using a keyboard with the CD-RW900SLKeyboard type setting Title input by keyboardError messages − Reference and specificationsMessages during operations Troublshooting Symptom Possible cause and remedySpecifications Dimensional drawing CD-RW900SL
Top Page Image Contents