Tascam CD-RW900SL owner manual Refreshing a disc, Erasing tracks, Erasing a whole disc

Page 29

6 − After recording

Erasing

Erasing tracks

This operation erases the specified track and all sub-sequent tracks from a recorded CD-RW disc.

NOTE

Once this operation has started, the STOP key cannot be used to cancel it. Please check the track range to be deleted first.

Erasing track is operated only when unit is in continu- os playback.

1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE TRACK? rotating the MULTI JOG dial or pressing the SKIP key on the remote control.

To cancel the operation at this point, press the

ERASE/DEL or the ERASE key again.

2.Push the MULTI JOG dial or press the ENTER key to enter the function.

The display shows Erase XX-XX(the number of

the first track and last track to be erased).

Rotate the MULTI JOG dial or press the SKIP key to change the track numbers you desire to erase.

To cancel the operation at this point, press the ERASE/DEL or the ERASE key again.

3.Push the MULTI JOG dial or press the ENTER key to operate the function.

The display shows Sure?

To cancel the operation at this point, press the

STOP key.

4.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.

5.When the tracks have been erased, Completewill appears on the display.

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc), follow the procedure below:

NOTE

Once the operation is proceeded, the STOP key cannot function. Please confirm before the operation.

1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE DISC?by rotating the MULTI JOG dial or pressing the SKIP key on the remote control.

To cancel the operation at this point, press the

ERASE/DEL or the ERASE key again.

2.Push the MULTI JOG dial or press the ENTER key to enter the function. The display shows Sure?

To cancel the operation at this point, press the

STOP key.

3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.

4.When the disc has been erased, Completeappears then Blank Discwill appear on the display.

Refreshing a disc

Refreshing the disc makes a disc usable again. This opera- tion destroys all data on the disc.

1.Load the disc, and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the REFRESH? rotating the MULTI JOG dial or pressing the SKIP key on the remote control.

To cancel the operation at this point, press the

ERASE/DEL or the ERASE key again.

2.Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function. The display shows Sure?

To cancel the operation at this point, press the STOP key.

3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remaining time. The unit starts counting down from a time shown on the display.

4.When the disc has been refreshed, Completeappears

then Blank Disc will appear on the display.

TASCAM CD-RW900SL 29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents CD-RW900SL Important Safety Precautions Important Safety Instructions Optical pickup Safety InformationContents − Introduction Supplied accessoriesRack-mounting the unit About this manualRecordable discs About CD-R and CD-RW discsAbout finalizing Never use a stabilizer or printable discs Environmental considerationsHandling of compact discs Beware of condensation Use of the remote control unitBatteries Inserting batteriesFront panel − Features of the CD-RW900SLRear panel Display RC-RW900SL Remote control unit − Menu operation Menu configurationOperation basics − Playback operations Using the skip functionDiscs for playback Simple playback operationsSelecting by track number Track searchNormal search Direct searchContinuous playback Playback modesSingle-track playback Random playbackRepeat playback Time display switchingTimer playback Auto Cue function To B repeat playbackAuto Ready function Pitch control functionPlaying back MP3 files Key control functionMP3 action setting Directory playback settingAbout MP3 track data SkipInput selection − RecordingInput monitoring Frequency conversionFull disc Basic recordingTime display while recording Fade-in and fade-out recording Advanced recordingSynchronized recording Sync recordingAutomatic track division To enable or disable automatic track divisionManually divide track DD digital directRestricting the number of tracks Rec mute functionUnfinalizing CD-RW discs − After recordingFinalizing Refreshing a disc ErasingErasing tracks Erasing a whole discTitle input operation − TitlingDisc title input Track title inputKeyboard type setting Using a keyboard with the CD-RW900SLTitle input by keyboard Other keyboard operationsMessages during operations − Reference and specificationsError messages Troublshooting Symptom Possible cause and remedySpecifications Dimensional drawing CD-RW900SL
Top Page Image Contents