Using Memory Location Points
Loading MEMO points
MEMO 1
MEMO 2
Establishing new MEMOs
Recalculation of MEMOs
Checking MEMO points
Erasing
Two autolocation points can be established in the 424 MKIII's memory system.
At the desired moment, hold the MEMO IN key and press the LOC 1 key. The MEMO 1 indicator will turn on, showing that the current tape location is loaded into that register.
Similarly, if you hold MEMO IN and press LOC 2, the current tape location is loaded as memory point 2 into that register.
Each time LOC 1 or 2 is pressed while MEMO IN is held down, a new memory point is established, and the previous memory point is erased.
MEMO points can't be entered while the tape is locating to either MEMO point or during REPEAT.
If the COUNTER RESET button is pressed, both MEMO points are automatically recalculated, so they stay the same relative to their original tape positions.
When the tape is stopped, hold down the desired LOC key (for 0.5 second or more). The content of the corresponding MEMO register will be displayed in the counter window.
Remember : If you don't hold down but just hit the LOC key, the tape is autolocated to the corresponding MEMO point.
Both MEMO points are erased when the cassette is taken out from the compartment or the power is turned off.
25