Grizzly H3122 instruction manual Introduction

Page 5

SECTION 2: INTRODUCTION

We are proud to offer the Model H3122 Classical Guitar Kit. This kit is part of a growing Grizzly fam- ily of fine woodworking products. When assem- bled according to the guidelines set forth in this manual, you can expect years of enjoyment from this guitar.

We are pleased to provide this manual with the Model H3122. It was written to guide you through assembly, review safety considerations, and cover general information. It represents our effort to produce the best documentation possible.

If you have any comments regarding this manual, please write to us at the address below:

Grizzly Industrial, Inc.

C/O Technical Documentation

P.O. Box 2069

Bellingham, WA 98227-2069

Most importantly, we stand behind our products. If you have any questions or parts requests, please call or write us at the location listed below.

Grizzly Industrial, Inc.

1203 Lycoming Mall Circle

Muncy, PA 17756

Phone: (570) 546-9663

Fax: (800) 438-5901

E-Mail: techsupport@grizzly.com

Web Site: http://www.grizzly.com

The specifications, drawings, and photographs illustrated in this manual represent the Model H3122 as supplied when the manual was pre- pared. However, owing to Grizzly’s policy of continuous improvement, changes may be made at any time with no obligation on the part of Grizzly. For your convenience, we always keep current Grizzly manuals available on our website at www.grizzly.com. Any updates to products will be reflected in these manuals as soon as they are complete. Visit our site often to check for the latest updates to this manual!

H3122 Classical Guitar Kit

-3-

Image 5
Contents Classical Guitar KIT Page Table of Contents Safety Introduction 101 103 104 107 105 106 102 Parts InventorySupplies/Tools SandingGuitar Body Recommended Tools & SuppliesBridge NeckFingerboardTo attach the neck to the body AssemblyNeck to Body To attach the fingerboard to the neck Fingerboard to NeckTo determine the correct bridge/nut loca- tions Bridge/Nut LocationsMasked bridge area Blocked sound hole Covered AreasPainting/Finishing Attaching Bridge Sound Hole DecalTo attach the sound hole decal To attach the bridge to the bodyTo install the guitar strings Installing StringsDiscussed later in the manual String HeightCorrect 1st fret string heights Strings at the 1st fretTo tune the guitar TuningImportant issues to consider when tuning a guitar General Aftermarket AccessoriesReference Info Warranty & Returns Warranty Card BOX BELLINGHAM, WA Grizzly INDUSTRIAL, INC