DigiTech EX-7 manual Selecting and Enabling an Effect Model

Page 11

Selecting and Enabling an Effect Model

1.Use the MODEL KNOB to select an Effect Model. (Refer to the Ef- fect Model Control table for a list of Effect Models.)

2.Rock the pedal forward and press firmly on the TOE SWITCH. The INDICATOR LED lights green to show that the Effect Model is enabled.

3.To bypass the Effect Model, rock the pedal forward and press firmly on the TOE SWITCH.The INDICATOR LED turns off to show that the Effect Model is bypassed.

Image 11

Contents Page Declaration of Conformity Page Included Items Setup Directions Expression FactoryTM Features at a Glance Page OUT 1 AMP Indicator LED Input Selecting and Enabling an Effect Model Model 1. Dunlop Cry BabyTM Model DescriptionsModel 2.Vox Clyde McCoyTM Wah Control 1 tip Pitch Shift Selects one Model 3. DigiTech XP300 Space StationTM Synth SwellTMWhammy Amount Model 4. DigiTech WhammyModel 5. Unicord Uni-VibeTM Model 6. Leslie 147 Rotary Speaker Model 7.A/DATM Flanger Effect Model Expression Control Pedal Effect Model Control TableSettings to GetYou Going Page Selecting and Activating a Distortion Model + Effect Model Page Distortion Model Cabinet Model Distortion and Cabinet ModelsFlexible Output ModeTM Connections Diagram Flexible Output Mode 1 Mono Connections Diagram Flexible Output Mode 2 Stereo Mixer Connections Diagram Flexible Output Mode 3 Stereo Amp Connections Diagram Flexible Output Mode 4 Amp + Mixer Flexible Output ModeTM Setup Calibrating the Expression Pedal Using the Optional FS3X Footswitch Down FS3X Footswitch OptionalPage Control 3/DIST GAIN, Model Specifications