DigiTech EX-7 manual Flexible Output ModeTM Setup

Page 30

Flexible Output ModeTM Setup

1.Power up the Expression FactoryTM Pedal.

2.Select Model 7 using the MODEL knob.

3.Press and hold the HEEL SWITCH for three seconds.The INDICA- TOR LED begins to flash green.

4.Release the HEEL SWITCH.

5.Turn the MODEL knob to Model 5 if you want to use AMP/MIXER mode (which lets you plug into both an amplifier and a mixer simulta- neously).

Turn the MODEL knob to Model 6 to select STEREO AMP mode. Leave the MODEL knob at Model 7 to keep the factory default STE- REO MIXER mode selected.

6.Press the TOE SWITCH to exit Flexible Output Mode Setup; the INDICATOR LED turns off and the pedal is bypassed.

NOTE: Selecting any other Models besides 5, 6, or 7 will prevent you from exiting Flexible Output Mode Setup.

Image 30

Contents Page Declaration of Conformity Page Included Items Setup Directions Expression FactoryTM Features at a Glance Page OUT 1 AMP Indicator LED Input Selecting and Enabling an Effect Model Model Descriptions Model 1. Dunlop Cry BabyTMModel 2.Vox Clyde McCoyTM Wah Model 3. DigiTech XP300 Space StationTM Synth SwellTM Control 1 tip Pitch Shift Selects oneModel 4. DigiTech Whammy Whammy AmountModel 5. Unicord Uni-VibeTM Model 6. Leslie 147 Rotary Speaker Model 7.A/DATM Flanger Effect Model Control Table Effect Model Expression Control PedalSettings to GetYou Going Page Selecting and Activating a Distortion Model + Effect Model Page Distortion and Cabinet Models Distortion Model Cabinet ModelFlexible Output ModeTM Connections Diagram Flexible Output Mode 1 Mono Connections Diagram Flexible Output Mode 2 Stereo Mixer Connections Diagram Flexible Output Mode 3 Stereo Amp Connections Diagram Flexible Output Mode 4 Amp + Mixer Flexible Output ModeTM Setup Calibrating the Expression Pedal Using the Optional FS3X Footswitch FS3X Footswitch Optional DownPage Specifications Control 3/DIST GAIN, Model