DigiTech EX-7 manual Setup Directions

Page 5

Setup Directions

Follow these setup directions before use:

1.Turn the volume down on the amplifier/mixer you are connecting to.

2.Connect the pedal output to the amplifier/mixer input.

3.Connect the guitar to the pedal input.

4.Connect the power supply to the pedal.

5.Turn up your amplifier/mixer level to your desired listening level.

6.Turn on the Effect Model by pressing the TOE SWITCH (or turn on the Effect + Distortion Model by pressing the HEEL SWITCH).

Image 5

Contents Page Declaration of Conformity Page Included Items Setup Directions Expression FactoryTM Features at a Glance Page OUT 1 AMP Indicator LED Input Selecting and Enabling an Effect Model Model 1. Dunlop Cry BabyTM Model DescriptionsModel 2.Vox Clyde McCoyTM Wah Control 1 tip Pitch Shift Selects one Model 3. DigiTech XP300 Space StationTM Synth SwellTMWhammy Amount Model 4. DigiTech WhammyModel 5. Unicord Uni-VibeTM Model 6. Leslie 147 Rotary Speaker Model 7.A/DATM Flanger Effect Model Expression Control Pedal Effect Model Control TableSettings to GetYou Going Page Selecting and Activating a Distortion Model + Effect Model Page Distortion Model Cabinet Model Distortion and Cabinet ModelsFlexible Output ModeTM Connections Diagram Flexible Output Mode 1 Mono Connections Diagram Flexible Output Mode 2 Stereo Mixer Connections Diagram Flexible Output Mode 3 Stereo Amp Connections Diagram Flexible Output Mode 4 Amp + Mixer Flexible Output ModeTM Setup Calibrating the Expression Pedal Using the Optional FS3X Footswitch Down FS3X Footswitch OptionalPage Control 3/DIST GAIN, Model Specifications