Selecting and Activating a Distortion Model + Effect Model
The Expression FactoryTM has seven Distortion Models that can be selected using the MODEL knob. This is done by accessing the Distor- tion Model Select mode. Once this mode is accessed, the MODEL knob selects a Distortion Model while the rest of the knobs maintain their labeled functions. To enter Distortion Model Select mode, follow these steps:
1.Rock the EXPRESSION PEDAL forward and then press and hold the TOE SWITCH for three seconds until the INDICATOR LED begins flashing yellow. If the distortion was already active, it will turn off first, and then turn back on once Distortion Model Select mode is active.
2.Once the INDICATOR LED begins flashing yellow, use the MODEL knob to select between the different Distortion Models. The Effect Model that was selected prior to entering Distortion Model Select mode remains active and does not change as the MODEL knob selects