REAR-PANEL Connections, Coaxial Digital Audio Output

REAR-PANEL CONNECTIONS

Coaxial Digital Audio Output	Video 1 Video Inputs		Surround Speaker Outputs
Coaxial Digital Audio Input	Video 1 Audio Inputs		Front/Center Speaker Outputs
Optical Digital Audio Input	Video 1 Video Output		AC Power Cord Jack
Subwoofer Output	Video 1 Audio Outputs		AM Antenna
Tape Inputs	Video 2 Video Input		FM Antenna
Tape Outputs	Video 2 Audio Inputs		Region Selector
CD Inputs	Video Monitor Outputs
DVD Video Inputs	TV Audio Inputs

NOTE: To assist in connecting the	Front Left:	White	Coaxial Digital Audio:	Orange
multichannel inputs, outputs and	Front Right:	Red	Composite Video:	Yellow
speakers, all connection jacks and	Center:	Green
terminals are color-coded in conformance	Surround Left:	Blue
with the latest EIA/CEA-863 standards	Surround Right:	Gray
as follows:	Subwoofer:	Purple

Coaxial Digital Audio Output:

Connect this jack to the matching digital input connector on a digital recorder such as a CD-R or MiniDisc recorder.

Coaxial Digital Audio Input:

Connect the coax digital output from a DVD player, HDTV receiver, LD player, MD player or CD player to this jack. The signal may be a Dolby Digital signal, a DTS sig- nal or a standard PCM digital source. Do not connect the RF digital output of an LD player to this jack.

Optical Digital Audio Input:

	Connect the optical digital output from a
	DVD player, HDTV receiver, LD player, MD
	player or CD player to this jack. The signal
	may be a Dolby Digital signal, a DTS
	signal or a standard PCM digital source.
	Subwoofer Output: Connect this
	jack to the line-level input of a powered
	subwoofer. If an external subwoofer
	amplifier is used, connect this jack to the
10	subwoofer amplifier input.

Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.

Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.

CD Inputs: Connect these jacks to the analog output of a compact disc player or CD changer.

Note: If your DVD player, HDTV set-top box, cable box, satellite receiver or other video source device is equipped with component (Y/Pr/Pb) video outputs that are compatible with component video inputs on your video display, it is recom- mended that you connect the source’s component video outputs directly to the corresponding component video inputs on the video display. In that case, you only need to connect the source’s audio out- puts to the AVR. If you don’t have compo- nent video connections on your TV or video display, then see the descriptions

below for connecting the source’s com- posite or S-Video outputs to the AVR.

DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source.

Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S- Video jacks on a VCR or other video source.

Video 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other video source.

Video 1 Video Output: Connect this jack to the RECORD/INPUT composite

video jack on a VCR.

Video 1 Audio Outputs: Connect

these jacks to the RECORD/INPUT audio jacks on a VCR or any other Audio recorder.