Panasonic KX-TVM50 installation manual Installation Manual

Page 41

Wall mount the VPS and AC adaptor (see 2.15 Wall Mounting).

11.

Close the covers (see 2.5 Opening/Closing the Covers).

10.

Initialise the VPS (see 2.14 Initialising the VPS During Installation).

9.

Secure the cables (see 2.13 Securing the Cables).

8.

Connect the VPS to earth (see 2.11 Frame Earth Connection).

Open the covers (see 2.5 Opening/Closing the Covers).

CAUTION

To turn off the power on the VPS, first press the Shutdown button, wait for the Alarm Indicator to light, then turn off the power switch. Turning off the power switch before the Alarm Indicator lights may cause the VPS to take an exceptionally long time (up to 10 minutes) to start up the next time the power is turned on.

CAUTION

The power cord is the main disconnect device. Make sure that the power outlet is located near the VPS and is easily accessible.

Connect the VPS to the PC to be used for programming (see 2.10 PC Connection).

5.

6.

7. Connect the AC adaptor to the VPS and to the power outlet (see 2.12 Connecting the AC Adaptor).

4. Connect the VPS to the appropriate extension ports of the PBX (see 1.2.2 Connection Examples—KX-TVM50or 1.2.3 Connection Examples—KX-TVM200/KX-NCV200). Use 4- conductor or 2-conductor cable as necessary (see 2.9 PBX Connections).

Remove the Dummy Cover Plates (see 2.6 Removing the Dummy Cover Plates).

1.

2.

3. Install the optional cards (see 2.7 Installing Optional Cards—KX-TVM50or 2.8 Installing Optional Cards—KX-TVM200/KX-NCV200).

2.4 Installation Overview

2.4 Installation Overview

The following is an overview of the steps needed to install optional cards and prepare the VPS hardware for use. Once hardware installation is complete, see Customising the System for instructions on software setup and VPS customisation.

CAUTION

The information below is only intended as an overview of the installation process. When installing the VPS, refer to the sections listed below for detailed instructions.

Installation Manual

41

Image 41

Contents Voice Processing System Version Voice Processing SystemACD Report Server Model Description System ComponentsImportant Safety Instructions For users in Germany For users in Taiwan onlyFor users in Finland, Norway and Sweden Installation Manual Http//doc.panasonic.de Other InformationFor Future Reference Installing KX-TVM/NCV Maintenance Console InstallationSystem Maintenance and Troubleshooting Voice Processing System OverviewAbout the Other Manuals Feature ManualTrademarks Programming ManualPrecautions for Users in the United Kingdom Installation Manual Table of Contents KX-TE Series PBX Programming for APT Integration 115 105120 137157 154163 172Section Voice Processing System Overview Main Unit Basic System ConstructionSystem Connection Diagram Options Initial Configuration and Expansion CapabilitiesOptional Cards-KX-TVM50 Optional Cards-KX-TVM200/KX-NCV200Installer Equipment and Software Requirements No. of Ports No. of Optional Port Using AA Service Cards Recommendations for System ConfigurationNo. of Trunks KX-TVM200/KX-NCV200PBX KX-TVM200/KX-NCV200 PBX Model Integration Type Compatible PBXsOverview Voice Mail IntegrationDPT Integration Connection Examples-KX-TVM50Slot Slot Assigned as VM DPT portsSlot Assigned as VM1 APT ports APT IntegrationInband/No Integration Connection Examples-KX-TVM200/KX-NCV200 Connection Example KX-TVM204 × 6, DPT Integration ModeHardware SpecificationsEnvironment SoftwareSpecifications Section Installation Wiring Precautions Before InstallationInstallation Precautions Environmental Requirements KX-TVM200/KX-NCV200 only Allowable Relative Humidity vs. TemperatureHard Disk Drive Usage Environment Operating AreaNecessary Tools not supplied Unpacking Outside/Inside View Names and LocationsKX-TVM200/KX-NCV200 System Components KX-NCV200 only Factory Installed Flash Memory Card KX-TVM50 only Power SwitchLAN Port Optional for KX-TVM50 USB PortInstallation Manual Opening the Covers Opening/Closing the CoversRemoving the Front Cover Removing/Attaching the Front CoverAttaching the Front Cover Closing the CoversOpening/Closing the Covers Removing the Dummy Cover Plates Installing Optional Cards-KX-TVM50 1 2-Port Hybrid Expansion Card KX-TVM502 InstallationIncluded Items No. of Ports No. of Useable JacksInstalling Optional Cards-KX-TVM50 2 2-Port Digital Expansion Card KX-TVM503 Installing Optional Cards-KX-TVM50 Memory Expansion Card KX-TVM524 LAN Interface Card KX-TVM594 Insert and tighten the screw as shown Screw Modem Card KX-TVM296 Installing Optional Cards-KX-TVM50 Installing Optional Cards-KX-TVM200/KX- NCV200 1 4-Port Digital Expansion Card KX-TVM204 Installing Optional Cards-KX-TVM200/KX-NCV200 Installing Cards in Slot 5 or Slot Modem Card KX-TVM296 PBX Connections Connecting to the PBXModular Plug Connection USB Connection PC ConnectionModem Connection LAN ConnectionPC Connection Frame Earth Connection Connecting the AC Adaptor Connecting the AC Adaptor Securing the Cables Securing the Cables Initialising the VPS During Installation Mounting on a Wooden Wall Wall MountingWall Mounting the VPS Wall Mounting Mounting on a Concrete or Mortar Wall Wall Mounting Mounting on Wooden Wall Wall Mounting the AC AdaptorMounting on Concrete or Mortar Wall Mount the AC adaptor as shown Wall Mounting Template for AC Adaptor Install a screw here 83 mmInstall a screw here 110 mm Wall Mounting Section Installing KX-TVM/NCV Maintenance Console Overview Password Security KX-TVM/NCV Maintenance Console InstallationSystem Requirements Required Operating SystemUpdating other Panasonic Drivers Installing KX-TVM/NCV Maintenance ConsoleClick Finish Windows 98SEWindows Windows MeWindows XP Click Continue AnywayStarting KX-TVM/NCV Maintenance Console Starting KX-TVM/NCV Maintenance Console Starting KX-TVM/NCV Maintenance Console Section APT/DPT Integration with a Panasonic KX-T Series PBX When to Use APT/DPT Integration What is APT/DPT Integration?3 APT/DPT Integration Features Guidelines for APT/DPT IntegrationPBX Control Mode Service ModeTrunk Service Caller NameTwo-way Recording Setting*3Two-way Transfer Caller ID CallbackKX-TDA Series PBX Programming for DPT Integration Go to the Groups-VM DPT Group-Unit Setting screenSet the ports Connection to INS Go to Example SettingsExample Settings Example Settings Click Apply to save the changed data Click Apply to save the changed data Click Apply to save the changed data Example Settings Click Apply to save the changed data KX-TDA Series PBX Programming for DPT Integration Live Call Screening Password Assignment KX-TDA Series Feature Programming for DPT IntegrationLive Call Screening LCS Programming Hang up or press the SP-PHONE buttonLive Call Screening Recording Mode Assignment Live Call Screening Password CancellingPress the Enter button Press the Store buttonLive Call Screening Private/Hands-Free Mode Assignment Live Call Screening Assignment via PC Programming Go to Extension-Wired Extension-Extension Settings screenLive Call Screening Button Assignment Press Two-way Recording TWR Button AssignmentTwo-way Transfer TWT Button Assignment Press # One-Touch Two-way Transfer One-Touch TWT Button AssignmentButton Assignment via PC Programming Go to Extension-Wired Extension-Flexible Key screenVoice Mail Transfer VTR Button Assignment Select Extension Number / Name for which you want to program Live Call Screening ActivationTwo-way Transfer TWT into Mailbox Two-way Recording TWR into MailboxOne-Touch Two-way Transfer One-Touch TWT into Mailbox Voice Mail Transfer VTR ProgrammingKX-TE Series PBX Programming for APT Integration KX-TE Series PBX Programming for APT Integration Example trunk feature settings KX-TE Series PBX Programming for APT Integration KX-TE Series PBX Programming for APT Integration KX-TD Series PBX Programming via the Managers Extension KX-TD Series PBX Programming for DPT IntegrationSoftware Verification EnterEnter 118 or Enter 117 orKX-TD Series PBX Programming for DPT Integration Version 4.03A5 0008301332 MUK Choose Voice Mail Integration from the System Menu Set Status to INS KX-TD500 PBX Programming for DPT IntegrationGo to the 1-1 Slot Assignment screen KX-TD500 PBX Programming for DPT Integration Go to the 1-3 Extension Port Assignment screen Go to the 1-4 VPS DPT Port Assignment screen Assign Extension Group No. for the port KX-TD500 PBX Programming for DPT Integration KX-TA Series PBX Programming for APT Integration Extension Group Recommended trunk feature settingsPort Press the Store button Press END HoldKX-TA Series PBX Programming for APT Integration Completing the PBX-VPS Connection Important information for KX-TE and KX-TA users PBX Screen output The 3-digit password you entered is displayed Enter the jack number. Screen output # Stop Rec KX-TD500 Click Apply Go to 4-2 Extension Line screenKX-TE Series Installation Manual Installation Manual Live Call Screening Cancel Button Assignment Press Store Two-way Recording Button AssignmentVoice Mail Transfer Button Assignment Two-way Transfer Button AssignmentDial the Voice Mail extension number. Screen output VTR Installation Manual Click OK or Apply KX-TE Series Two-way Transfer into Mailbox Live Call Screening Password ControlTwo-way Recording into Mailbox Restriction on TWR/TWT Activation KX-TD500 Only Section When to Use Inband Integration What is Inband Integration?Guidelines for Inband Integration PBX Requirements for Inband IntegrationScreened Transfer from an SLT Dtmf SignallingMessage Waiting Notification on an SLT Follow-on ID or Called Party ID Global Parameters PBX Settings for Inband IntegrationGeneral Guidelines and Definitions PBX Environment PBX Interface ParametersReconnect Sequence on Busy Digit Translation Table Parameters Inband SignallingCode Call State Sent to the Voice Mail Port When Default Outside Transfer Sequence Transfer to Outside ParametersT1232/TE TD612 T308 TD816 Sequences for Voice Mail IntegrationOther PBX TypeKX-TDA Series PBX Programming for Inband Integration Go to the Groups-VMDTMF Group-Group Setting screenGo to Example Settings Installation Manual 165 Click Apply to save the changed data Click Apply to save the changed data KX-TDA Series PBX Programming for Inband Integration Example Settings Click Apply to save the changed data KX-TDA Series PBX Programming for Inband Integration KX-TE Series PBX Programming for Inband Integration KX-TE Series PBX Programming for Inband Integration Example trunk feature settings Installation Manual 175 KX-TE Series PBX Programming for Inband Integration KX-TD Series PBX Programming for Inband Integration Choose Miscellaneous from the System Menu Main MenuSet Card Status to INS KX-TD500 PBX Programming for Inband IntegrationSet Port Status to INS Assignment of the extension line to be connected to the VPS Go to Example Settings Example Settings KX-TD500 PBX Programming for Inband Integration Click Apply to save the changed data Example Settings KX-TD500 PBX Programming for Inband Integration Click Apply to save the changed data KX-TA Series PBX Programming for Inband Integration Mailbox for Extension ExtensionSection Customising the System Before Programming Quick SetupStarting Up Starting Quick Setup System Security settings Using Quick SetupPBX Environment settings Create mailboxes If Auto Configuration is startedExtension Numbers Mailbox settings Port/Trunk settings Date and Time setting Finalising Quick Setup If Auto Configuration is skipped Port/Trunk settings Date and Time setting Finalising Quick Setup Automated Attendant Service Port/Trunk SettingsVoice Mail Service Custom Services Interview ServicePort/Trunk Settings Example of a Menu & Transfer Custom Service Programming Custom ServicesConfirming Custom Service Programming Operator ServiceThen click Edit Default Mailbox… Setting Mailboxes and GroupsCreating the Default Mailbox Template Setting Mailboxes and Groups Editing a Mailbox Deleting a Mailbox Subscribers Password ResetTo delete the current password To set the new passwordExtension Groups Subscriber TutorialMailbox Groups Recording Prompts Training the Subscriber Section System Maintenance and Troubleshooting Initialising the VPS Initialising the VPS with KX-TVM/NCV Maintenance ConsoleClick OK Initialising the VPS with the Mode SwitchInitialising the VPS Backing Up the System Click Utility System Back up Make BackupBacking Up the System Operation Resetting the VPSPress the Reset button only Utility Reports VPS TroubleshootingLine disconnection occurs Unable to access to Troubleshooting Glossary Autoplay New Message Company Greeting Dtmf Follow-On ID LCD Mailbox Number Non-Subscriber Playback Volume/Speed Control Rewind System Administrator VPS Installation Manual Installation Manual Index Numerics 151 Wall Mounting Template For KX-TVM50 Wall Mounting Template for KX-TVM200/KX-NCV200 Copyright PSQX4101ZA KK0806TM0

Related manuals

Manual 6 pages 52.72 Kb