3.8 External Sequencer Start/Stop
You can start and stop the external sequencer connected to the MP5 with SW button.
First, connect an external sequencer to the MIDI OUT jack on the rear panel of the MP5. Make sure that the sequencer is capable to receiving external MIDI clock and commands. Check the MIDI implementation chart of the sequencer if the Recognized column of the System Real Time Clock & Commands is marked “O (yes)”. Consult the owner’s manual of the sequencer on how to set the sequencer to receive external MIDI clock and commands.
When the SW button is lit the MIDI clock is transmitted
External Sequencer Start: Press the SW button to turn the light on. The display briefly shows as follows and the external sequencer starts.
External Sequencer Stop: Press the SW button to turn the light off. The display briefly shows as follows and the external sequencer stops.
Note:
The tempo is controlled by the Metronome tempo of the MP5. See page18 for details.
24