Kawai MP5 manual Channel Mode Message

01H 64H	mmH	Decay time	mm:00H - 7FH(-64 ~ 0 ~ +63)	Default = 40H
01H 66H	mmH	Release time	mm:00H - 7FH(-64 ~ 0 ~ +63)	Default = 40H

*Ignoring the LSB of data Entry

*It is not affected in case of modifying cutoff if tone does not use the DCF.

RPN MSB/LSB
Status			2nd Byte	3rd Byte
BnH			65H	mmH
BnH			64H	llH
n=MIDI channel number				:0H-fH(ch.1 ~ ch.16)
mm=MSB of the RPN parameter number
ll=LSB of the RPN parameter number
RPN number implemented in MP5 are the followings
RPN #		Data
MSB LSB		MSB	LSB	Function & Range
00H	00H	mmH	llH	Pitch bend sensitivity
		mm:00H-0cH (0~12 [half tone]),ll:00H			Default=02H
00H	01H	mmH	llH	Master fine tuning
		mm,ll :20 00H - 40 00H - 60 00H (-8192x50/8192 ~ 0 ~ +8192x50/8192 [cent])
00H	02H	mmH	llH	Master coarse tuning
		mm:28H - 40H - 58H(-24 ~ 0 ~ +24 [half tone]), ll:Ignored(as 00H)
7fH 7fH		-- --		RPN NULL
Program Change
Status			2nd Byte
CnH			ppH
n=MIDI channel number				:0H-fH(ch.1 ~ ch.16)
pp=Program number				:00H - 7fH(0 ~- 127)	Default = 00H
Pitch Bend Change
Status			2nd Byte	3rd Byte
EnH			llH	mmH
n=MIDI channel number				:0H-fH(ch.1 ~ ch.16)
mm,ll=Pitch bend value				:00 00-7f 7fH(-8192~0~+8192)	Default = 40 00H

1.2 Channel Mode Message

All Sound OFF
Status	2nd Byte	3rd Byte
BnH	78H	00H
n=MIDI channel number		:0H-fH(ch.1 ~ ch.16)
Reset All Controller
Status	2nd Byte	3rd Byte
BnH	79H	00H
n=MIDI channel number		:0H-fH(ch.1 ~ ch.16)
All Note Off
Status	2nd Byte	3rd Byte
BnH	7bH	00H
n=MIDI channel number		:0H-fH(ch.1 ~ ch.16)

65