Kawai MP5 manual Reverb parameter list, Quick Change Reverb Offset

17.	ROTARY 1	rate	slow/fast	wet balance
18.	ROTARY 2	rate	slow/fast	drive
19.	AUTO WAH	sense	0 -100 (%)	wet balance
20.	PEDAL WAH	sense	0 -100 (%)	wet balance
21.	ENHANCER	intensity	0 -100 (%)	send level
22.	OVERDRIVE	drive	0 -100 (%)	wet balance

REVERB parameter list

		REVERB Time		REVERB Depth
1.	HALL 1	rev.time	0.3 - 5.0S	send level
2.	HALL 2	rev.time	0.3 - 5.0S	send level
3.	STAGE 1	rev.time	0.3 - 3.0S	send level
4.	STAGE 2	rev.time	0.3 - 3.0S	send level
5.	ROOM 1	rev.time	0.3 - 3.0S	send level
6.	ROOM 2	rev.time	0.3 - 3.0S	send level
7.	PLATE	rev.time	0.3 - 3.0S	send level

Note:

When EFX/REVERB depth is set to 0 while the EFX/REVERB button is active, the EFX/REVERB button will blink to indicate that the EFX/REVERB is turned ON but the depth is set to 0.

EFX rate and REVERB time are effective to internal zone only.

If the selected zone is set to BOTH, changing the value for EFX depth or REVERB depth affects for both internal and external sections. If you want different settings for internal and external sections, first enter the edit mode by pressing the MENU button and press the EFFECT button. Now you can select internal or external zone with ZONE SELECT button. (See page33 for details.)

Quick Change Reverb Offset

Press and hold the EFFECT button. The EFFECT button starts blinking

and the following screen for Reverb Offset (see page47) will be shown until the button is released.

This parameter is stored automatically when leaving the screen, there is no need to store the setting manually.

28