10Additional information
Chapter 10
Additional information
Optional system settings
All the available settings in the standby setup menu are listed below. See the notes in each section for more information about the settings. The first setting in each section is the default.
1Switch the system into standby.
2 Press SHIFT+SETUP and use then ENTER to choose the setting you want to adjust.
The available settings are shown in the front panel display.1
3 Use to adjust then press ENTER to confirm and exit.
System demo setting
Switches the automatic demo feature on or off (this starts when you plug in for the first time):
•DEMO ON – Switches the demo feature on.
•DEMO OFF – Switches the demo feature off.
Frequency step setting
If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/region.
•AM 9K
•AM 10K
TV system setting
The default setting of this system is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you find picture distortion with some discs, set the TV system to match your country or region’s system. However, this may restrict the kinds of disc you can watch. See the table for the kinds of discs compatible with
each setting (AUTO, PAL and NTSC).2
• After using | to choose TV SYS (step | |
2 above), press ENTER to change the TV | ||
system as follows: |
| |
• AUTO | NTSC |
|
• NTSC | PAL |
|
• PAL | AUTO |
|
The system automatically switches on and you’ll see the new TV system setting in the
display after seeing WELCOME.3
|
| Player setting | |||
Media Type | Format | NTSC | PAL | AUTO | |
|
|
|
|
| |
DVD/Super VCD/ | NTSC | NTSC | PAL | NTSC | |
Video CD/DivX | PAL | NTSC | PAL | PAL | |
Video | |||||
|
|
|
| ||
|
|
|
|
| |
CD/MP3/WMA/ | — | NTSC | PAL | NTSC or | |
|
|
| PAL | ||
JPEG/no disc |
|
|
|
| |
|
|
|
|
|
DTS CD setting
If you play a
Note
1The setup menu is exited automatically after 5 minutes of inactivity.
2Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage. However, in some cases, the image may appear without col- or. If your PAL TV does not have a
3 You have to switch the player into standby (press STANDBY/ON) before each change.
34
En