Solid State Logic X-Rack E Series Controls, HF Band controls, HMF Band controls, LF Band controls

Page 6
Variable from 1.5kHz to 16kHz Variable between ±15dB (‘Brown’) Variable between ±18dB (‘Black’) 0.8 (‘Brown’)
1.3 (‘Black’)
Variable from 600Hz to 7kHz Variable between ±15dB (‘Brown’) Variable between ±18dB (‘Black’) Variable from 0.5 to 2.5 (‘Brown’) Variable from 0.5 to 4 (‘Black’)
Variable from 200Hz to 2.5kHz Variable between ±15dB (‘Brown’) Variable between ±18dB (‘Black’) Variable from 0.5 to 2.5 (‘Brown’) Variable from 0.5 to 4 (‘Black’)
Variable from 30Hz to 450Hz Variable between ±15dB (‘Brown’) Variable between ±18dB (‘Black’) 0.8 (‘Brown’)
1.3 (‘Black’)

X-Rack Owner’s Manual

K.3.4 Controls

This is a four band equaliser that can be switched between two different sets of curves; one based on SSL’s ‘02’ (‘Brown Knob’) EQ and the other based on the latest version of the classic ‘242’ E Series (‘Black Knob’) EQ.

HF Band controls:

Frequency

Gain

‘Q’ (on ‘BELL’ setting)

HMF Band controls:

Frequency

Gain

‘Q’

LMF Band controls:

Frequency

Gain

‘Q’

LF Band controls:

Frequency

Gain

‘Q’ (on ‘BELL’ setting)

Page K-4

Image 6
Contents Solid State Logic Page ‘Brown Knob’ EQ ConnectionOperation ‘Black Knob’ EQK-2 Measurement References Performance SpecificationMeasurement Conditions PerformanceHMF Band controls ControlsHF Band controls LMF Band controlsHF EQ Maximum Gain Calibration InformationEQ Alignment HMF EQ Maximum GainLF EQ Maximum Gain Output Balance‘Balance’ Adaptor Environmental Specification Connector Details Audio InputPhysical Specification Audio OutputK-8