Sony PCS-1P manual SS-13 Is video input properly set?

Page 45

13.No video input (object, AUX1, or AUX2) image can be displayed. The image of a camera is displayed.

SS-13

Is video input properly set?

YES

Is “Object” selected as video input?

NO

NO

Press input selector button of remote controller and select input properly using joystick.

YES

Is video signal output

NO

from equipment connected

 

to AUX1 and AUX2

 

terminals?

 

 

YES

Connected equipment is defective.

 

 

 

 

 

Communication terminal is defective.

Is power

PCS-DS150 on?

YES

Does

obstacle exist

between infrared light

emitter of PCS-DS150 and infrared

photosensor of communication terminal?

NO

Communication terminal or PCS-DS150 is defective.

NO

Turn on power of PCS-DS150.

YES

Remove obstacle and adjust so that light emitter is linear with photosensor.

PCS-1/PCS-1P

2-15

Image 45
Contents PCS-1 PCS-1P Warnung Table of Contents Technical Data Camera Range Lay Out the Videoconferencing RoomTop view horizontal range at maximum zoom- out Side view vertical range at maximum zoom-outHighly directional range of microphone Microphone layout examples Installation of document stand PCS-1/PCS-1P Operating Environment Layout ConsiderationsLighting Considerations Flowchart of Installation System Connections When Used in LAN 100BASE-TX/10BASE-TTerminal When Used in IsdnInitialization Inserting Batteries into the Remote CommanderRemoted sensor PCS-1/PCS-1P To release the standby mode Standby Mode FunctionTurning On Launcher menuProtocol When the Power was First Turned on after InstallationArea Code To go back to the previous wizard To cancel the settingLAN System SettingMODE1 DSB Flowchart of Opening Test Controller Outgoing Procedure of IsdnStart meeting is displayed, Screen Incoming Procedure of IsdnOutgoing Procedure of LAN Start meeting is displayed, Incoming Procedure of LAN Operation procedure Section MaintenanceTrouble Separation of ComponentsYES SS-02 Does Power Amber lamp of main unit light? Power is not turned on during automatic incoming. Isdn Power is not turned on during automatic incoming. LAN Is the monitor SS-06 Is the launcher menu No function can be operated using a remote controller Camera on the local side cannot be operated No line is connected. Isdn No line is connected. LAN Is the volume of the monitor TV turned down? SS-12 SS-13 Is video input properly set? Check the terminal of the other end Is the setting of the video signal input correct? Operation Log Operation log using commercial PCPCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P Operation log using commercial PC PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P Updating of Software Updating Using Memory StickService Mode For erasure of an address book and settingFor system reset To stop setting For command inputContents of functions For loading of applicationPCS-1/PCS-1P Page Example of system Connection via HubOFF Connection via Router OFF Connection via Dhcp OFF LAN1 LAN2 Connection via GatekeeperOFF Connection via Dhcp and Gatekeeper OFF During Opposed Connection Specified Value PCS-1/1P Port Number UsedPort number at first point Port number at N’th point During Use of Internal MCU Function Specified ValueTable of connection between PCS-1 and Catalyst Setting of PCS-1 and HUBPage Page Sony Corporation
Related manuals
Manual 8 pages 19.36 Kb

PCS-1, PCS-1P specifications

The Sony PCS-1P and PCS-1 are cutting-edge video conferencing solutions designed for businesses seeking high-quality communication tools. Tailored for professional environments, these units facilitate seamless connectivity, encouraging collaboration without geographical barriers.

One of the standout features of the PCS-1P and PCS-1 is their remarkable video quality. Both models support high-definition video, providing sharp, crystal-clear images that enhance the remote communication experience. This clarity is especially beneficial for presentations, allowing participants to see details in charts and graphics with precision. The PCS-1P model specifically offers 720p HD resolution, ensuring that every meeting feels as face-to-face as possible.

In terms of audio, Sony has equipped both the PCS-1P and PCS-1 with advanced audio technologies. These units include high-quality microphones that capture sound from all corners of the room, coupled with noise cancellation features that eliminate background distractions. This results in a clear and engaging communication experience, essential for effective collaboration.

Another significant characteristic of the PCS-1 series is its user-friendly interface. The systems are designed for easy setup and operation, making them accessible even for less tech-savvy users. An intuitive remote control allows users to manage video calls effortlessly, adjusting settings without fumbling through complicated menus.

Connectivity is also a hallmark of the PCS-1P and PCS-1. These devices can connect to a wide range of networks, including IP networks, offering flexibility in how and where users can engage. Additionally, they support both SIP and H.323 protocols, ensuring compatibility with various other video conferencing systems and platforms.

Furthermore, the PCS-1P and PCS-1 models boast built-in record and playback functionalities, allowing users to capture meetings for future reference. This feature is invaluable for businesses that require a record of discussions and decisions made during video conferences.

With their robust feature set, including reliable connectivity, high-definition video and audio quality, and ease of use, Sony's PCS-1P and PCS-1 video conferencing systems stand out as leading solutions for modern enterprises. They not only enhance communication but also promote productivity and collaboration across teams, regardless of their physical location. In a globally connected business environment, these tools represent a strategic asset for any organization aiming to improve its communication efforts.