Sony PCS-1P manual Service Mode, For erasure of an address book and setting, For system reset

2-5. Service Mode

In the service menu of PCS-1/1P, data can be saved in the Memory Stick of an address book using a commercial Memory Stick or read from a Memory Stick (overwritten in the current data).

1.Continuously press the menu button of a remote controller and display a “Set” menu including “Outgoing” and “Incoming”.

For saving of an address book, loading of an address book, saving of application, saving of a communication log, saving of a system log, saving of setting, and loading of setting

1.Display a service menu.

2.Insert the Memory Stick, in which data can be written or in which the required contents have been already recorded, into a Memory Stick slot.

Setup
Dial	Answer
Multipoint	Audio
General	Administrator
ISDN	LAN
Information	Status

2.Press the → button of a remote controller and select “Outgoing”. Enter “7” and “2” sequentially using the numeric key of a remote controller without pressing the decide button and display the service menu.

Setup
Dial	Answer
Multipoint	Audio
General	Administrator
ISDN	LAN
Information	Status

n

To cancel the service mode, select “Cancel” using ↑ , ↓ , ← , and → buttons of a remote controller and press the decide button, or press the return button of a remote controller. The current display returns to a set menu.

PCS-1/PCS-1P

3. Select the function, which you want to execute, using ↑ , ↓ , ← , and → buttons of a remote controller and press the decide button.

4.A confirmation message on whether to execute the function is displayed. To execute, select “OK” and press the decide button. To cancel execution, select “Cancel” and press the decide button.

5.After execution or cancellation, the current display returns to a service menu.

6.Push in the Memory Stick once and take out it.

For erasure of an address book and setting

1.Display a service menu.

2.Select the function, which you want to execute, using

↑ , ↓ , ← , and → buttons of a remote controller and press the decide button

3.A confirmation message on whether to execute the function is displayed. To execute, select “OK” and press the decide button. To cancel execution, select “Cancel” and press the decide button.

4.After execution or cancellation, the current display returns to a service menu.

For system reset

1.	Display a service menu.
2.	Select “System reset” using ↑ , ↓ , ← , and → buttons of

a remote controller and press the decide button

3.A confirmation message on whether to execute is displayed. To execute, select “OK” and press the decide button. To cancel execution, select “Cancel” and press the decide button.

4.After execution, a launcher menu is displayed. After cancellation, the current display returns to a service menu.

2-29