Sony PCS-1P manual Off

Page 66

3. The LAN set menu of teleconference terminal A is set as described below.

DHCP mode:

OFF

Host name:

Enter any name.

IP address:

Local IP address (192.100.10.10)

Network mask:

Depends on a network. Usually, set to 255.255.255.0.

Gateway address:

192.100.10.1

DNS address:

Blank

Gatekeeper used:

OFF

Gatekeeper address:

Blank

User name:

Blank

User number:

Blank

SNMP service:

OFF

Trap transmission destination: Blank

Community name:

public

Description of device:

Videoconference Device

Installation place:

Blank

Contact of administrator:

Blank

NAT setting:

OFF

NAT address:

Blank

Packet retransmission request: Blank

Optimum rate control:

OFF (Set to ON when a packet loss occurs frequently.)

Port number used:

Specified value (Set to “User setting” when a port number is specified

 

by the network administrator.)

TCP port number:

2253 (Enter the port number specified by the network administrator

 

when the port number used is set to “User setting”.)

UDP port number:

49152 (Enter the port number specified by the network administrator

 

when the port number used is set to “User setting”.)

4.Confirm that the IP address displayed in the launcher menu of teleconference terminal A is 192.100.10.10.

5.Enter LAN in the address book of teleconference terminal A for a line type, IP address 192.100.20.20 of teleconference terminal B in it for an IP address, and other required items. After that, register teleconference terminal B in the address book and initiate a call. Or set LAN for a line type and IP address 192.100.20.20 of teleconference terminal B for an IP address by dialing, and then initiate a call.

3-4

PCS-1/PCS-1P

Image 66
Contents PCS-1 PCS-1P Warnung Table of Contents Technical Data Top view horizontal range at maximum zoom- out Lay Out the Videoconferencing RoomCamera Range Side view vertical range at maximum zoom-outHighly directional range of microphone Microphone layout examples Installation of document stand PCS-1/PCS-1P Operating Environment Layout ConsiderationsLighting Considerations Flowchart of Installation When Used in LAN 100BASE-TX/10BASE-T System ConnectionsWhen Used in Isdn TerminalInserting Batteries into the Remote Commander InitializationRemoted sensor PCS-1/PCS-1P Turning On Standby Mode FunctionTo release the standby mode Launcher menuWhen the Power was First Turned on after Installation ProtocolArea Code To cancel the setting To go back to the previous wizardSystem Setting LANMODE1 DSB Flowchart of Opening Test Outgoing Procedure of Isdn ControllerStart meeting is displayed, Incoming Procedure of Isdn ScreenOutgoing Procedure of LAN Start meeting is displayed, Incoming Procedure of LAN Section Maintenance Operation procedureSeparation of Components TroubleYES SS-02 Does Power Amber lamp of main unit light? Power is not turned on during automatic incoming. Isdn Power is not turned on during automatic incoming. LAN Is the monitor SS-06 Is the launcher menu No function can be operated using a remote controller Camera on the local side cannot be operated No line is connected. Isdn No line is connected. LAN Is the volume of the monitor TV turned down? SS-12 SS-13 Is video input properly set? Check the terminal of the other end Is the setting of the video signal input correct? Operation log using commercial PC Operation LogPCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P Operation log using commercial PC PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P PCS-1/PCS-1P Updating Using Memory Stick Updating of SoftwareService Mode For erasure of an address book and settingFor system reset Contents of functions For command inputTo stop setting For loading of applicationPCS-1/PCS-1P Page Connection via Hub Example of systemOFF Connection via Router OFF Connection via Dhcp OFF Connection via Gatekeeper LAN1 LAN2OFF Connection via Dhcp and Gatekeeper OFF PCS-1/1P Port Number Used During Opposed Connection Specified ValueDuring Use of Internal MCU Function Specified Value Port number at first point Port number at N’th pointSetting of PCS-1 and HUB Table of connection between PCS-1 and CatalystPage Page Sony Corporation
Related manuals
Manual 8 pages 19.36 Kb

PCS-1, PCS-1P specifications

The Sony PCS-1P and PCS-1 are cutting-edge video conferencing solutions designed for businesses seeking high-quality communication tools. Tailored for professional environments, these units facilitate seamless connectivity, encouraging collaboration without geographical barriers.

One of the standout features of the PCS-1P and PCS-1 is their remarkable video quality. Both models support high-definition video, providing sharp, crystal-clear images that enhance the remote communication experience. This clarity is especially beneficial for presentations, allowing participants to see details in charts and graphics with precision. The PCS-1P model specifically offers 720p HD resolution, ensuring that every meeting feels as face-to-face as possible.

In terms of audio, Sony has equipped both the PCS-1P and PCS-1 with advanced audio technologies. These units include high-quality microphones that capture sound from all corners of the room, coupled with noise cancellation features that eliminate background distractions. This results in a clear and engaging communication experience, essential for effective collaboration.

Another significant characteristic of the PCS-1 series is its user-friendly interface. The systems are designed for easy setup and operation, making them accessible even for less tech-savvy users. An intuitive remote control allows users to manage video calls effortlessly, adjusting settings without fumbling through complicated menus.

Connectivity is also a hallmark of the PCS-1P and PCS-1. These devices can connect to a wide range of networks, including IP networks, offering flexibility in how and where users can engage. Additionally, they support both SIP and H.323 protocols, ensuring compatibility with various other video conferencing systems and platforms.

Furthermore, the PCS-1P and PCS-1 models boast built-in record and playback functionalities, allowing users to capture meetings for future reference. This feature is invaluable for businesses that require a record of discussions and decisions made during video conferences.

With their robust feature set, including reliable connectivity, high-definition video and audio quality, and ease of use, Sony's PCS-1P and PCS-1 video conferencing systems stand out as leading solutions for modern enterprises. They not only enhance communication but also promote productivity and collaboration across teams, regardless of their physical location. In a globally connected business environment, these tools represent a strategic asset for any organization aiming to improve its communication efforts.