Using Patterns (Pattern Mode)
5.Press the [REC] key.
The [REC] key and [START] key light up, indicating that the
6.To enter a note, hit the pad corresponding to the desired sound.
For example, tapping pad 1 will enter a bass drum note (pad 1 lights up). The tapping intensity will also be recorded. When you press the [REC] key, the current position advances by the minimum unit. You can verify the current position (measure/beat) in the pattern by checking the display.
7.To enter a rest, press the [REC] key.
No sound is recorded, and the position advances by one step. If you press the [REC] key, the current position within the beat is shown as number of ticks.
NOTE 
•If you press the [PLAY] key, the current position within the beat is shown as number of ticks, for as long as the button is held.
•When there is not enough remaining free memory in the
When the end of the pattern is reached, the recording loops back to the beginning and continues, allowing you to add to the recording as often as desired. (If necessary, use the [PAD BANK] key to change the pad bank.)
8.To erase a sound, use the [REC] key to move to the desired position. Then press the corresponding pad while holding down the [DELETE/ERASE] key.
As you move the position with the [REC] key, the pad that has been input for the current position lights up. Pressing the pad while holding the [DELETE/ERASE] key down causes the pad to go out and the sound will be erased.
9.When recording is completed, press the [STOP] key.
The [REC] key goes out and step recording terminates.
20 ZOOM