Zoom MRT-3 05P, 51@, Copying a Kit, Kit mode, select the kit to be used as copy source

Page 30

Creating Your Own Kit (Kit Mode)

Copying a Kit

A kit of the MRT-3 (preset kit or user kit) can be copied to any other user kit number (51 – 70). This is useful for example when wishing to change only a part of a kit.

1.In kit mode, select the kit to be used as copy source.

The copy source can be either a user kit or a preset kit.

Copy source kit number

05P

2.Press the [INSERT/COPY] key.

The [INSERT/COPY] key flashes and the current kit is selected as copy source. When the copy source is a user kit, the indication "CoPy" flashes on the display.

COPY

When the copy source is a preset kit, the user kit "51U" is selected as default target, and the number flashes on the display.

51@

3.Use the [VALUE +/-] keys to select a user kit (U51 – U70) as copy target.

Only user kits can be selected as copy targets.

NOTE

When the copy is executed, the existing contents of the user kit selected as copy target will be erased. Make sure that the kit you have selected is one that you don't mind erasing.

When the copy source is a user kit, the same kit is first selected after step 2. However, it is not possible to copy a kit onto itself.

30 ZOOM MRT-3

Image 30
Contents 8888 Battery operation Safety Precautions/ Usage PrecautionsSafety Precautions AC adapter operationUsage Precautions HandlingContents Introduction MRT-3Names of Parts Top PanelRear Panel Getting Connected Connection ExampleTurn the unit over and open the battery compartment cover Using BatteriesTurn power to the MRT-3 on PreparationsTerms Used in This Manual PatternPad/Pad Bank Preset kits Kit Kit03Kit User kitsListening to the Demo Song Press the Function keyPress the Song key Press the Pattern key To switch the kit played by the pads, press the KIT keyPlaying the Pads Manual Play Hit any padUse the Value +/- keys to select a kit number D05 @05 Using Patterns Pattern ModeA01 Playing a Pattern114 01-3112 Changing the Tempo of Pattern Playback@01E Real-Time Pattern RecordingPress the Function key and then pad 3 Quantize Press the Function key again While holding down the REC key, press the Play keyAdjust the tempo if necessary Tap the pads in accordance with the metronome soundPattern Step Recording Press the REC key To enter a rest, press the REC keyChanging User Pattern Resolution After Recording Changing the User Pattern LengthChanging the User Pattern Beat Use the Value +/- keys to set the new bar lengthUse the Value +/- keys to set the new beat @05 A05Copy Copying a PatternErasing a Single User Pattern @01DEL Pattern mode, select the user pattern to be erased U01 U99Deleting All User Patterns @05EALL DEL Pattern mode, with playback stopped, press the Function keyPress the KIT key Creating Your Own Kit Kit ModeEditing a User Kit Press pad 1 or 3 7 to select the item to change1212 Items for individual pads instrument soundItems common to entire kit Pad 3 Inst Tune Kit ItemsPad 1 PAD Inst Pad 5 Inst PANPad 4 KIT Level NormPad 7 Inst Level Pad 6 PAD SensCopying a Kit 05P51@ Kit mode, select the kit to be used as copy sourceZoom MRT-3 Settings for entire song Creating Songs Song ModeWhat Is a Song? Settings for individual patternsRecording Song Patterns 02 E@23 Use the Value +/- keys to select an empty song numberEE02 To proceed to the next step, press the REC key0125 When one song is completed, press the Stop key0103 To listen to the song, press the Play keyChanging the Tempo Within a Song Changing the Song Volume 122Hold down the Tempo key Selecting a Dedicated Song Kit When you have selected the kit, press the Function keyPAT Hold down the Function keyCopying a Song 0100Checking the Amount of Remaining Memory for Songs Song mode, press the Function key, and then the Pattern keyDEL Deleting a SongDeleting All Songs If desired, you can delete all songsControlling the MRT-3 With a Foot Switch Other FunctionsStrt Use FS01 to control start/pause A7A5Use FS01 to set the tempo Use FS01 to control start/stopInt Internal Synchronizing Playback With an External DevicePattern mode, press the Function key and then pad 6 Midi Midi Midi clockUse the Value +/- keys to select the Midi or rMt setting When rMt is selected as clock sourceMidi Playing MRT-3 Sounds From an External Midi Component When the setting is complete, press the Function key againINT Press and hold the KIT keySetting the Pattern/Song Playback Swing Use the Value +/- keys to adjust the swing amountPlay the external Midi sequencer or keyboard Setting the Precount for Real-Time Recording Returning the MRT-3 to the Factory Default Condition Hold down the REC key while turning power to the MRT-3 onTroubleshooting Specifications Stereo OUTReference Kit ListMidi Note Number Chart PAD #Instrument List Category Inst # NameHI Hats Pattern List KITPOP01 HIP01 INTRO01 Midi Implementation FCHMidi Implementation Chart Drum MachineIndex DisplayChanging the beat of a user Zoom Corporation