Delete
Pattern A 
Pattern B 
Pattern C 
Pattern D
Pattern A 
Pattern B 
Pattern D
10.When one song is completed, press the [STOP] key.
The [REC] key LED goes out, and song recording stops. The song position returns to step 1.
11.To listen to the song, press the [PLAY] key.
The [PLAY] key lights up and the song is played back. The [TEMPO] key flashes according to the tempo of the song. During playback, the first two digits of the display show the song number, and the last two digits show the current step number.
Song number Step number
0103
Pressing the [PATTERN] key during playback causes the display to show the number of measures since the start of the song.
Measure count from start of song
0125
HINT 
•If you switch the song during playback, the new song is played immediately.
•If you want to insert a pause in the song, program an empty pattern as a step.
12.Press the [STOP] key whenever you want to terminate playback.
The song returns to the start position. By pressing the [PLAY] key again, you can start playback of the song again from the beginning.
HINT 
•Pressing the [PLAY] key instead of the [STOP] key causes the PAUSE key to flash, and playback is paused. To resume playback from the same point, press the [PLAY] key once more.
Creating Songs (Song Mode)