Zoom operation manual Returning the MRT-3 to the Factory Default Condition

Page 49

Returning the MRT-3 to the Factory Default Condition

You can return all stored data and settings of the MRT-3 to the factory default condition. This is called initialization.

NOTE

Use this function with care. Initialization will clear all user pattern data, user kit data, and song data that you have created.

1.Hold down the [REC] key while turning power to the MRT-3 on.

The display shows "Init".

IN T

2.To carry out the initialization process, press the [REC] key once more. To cancel the operation, press the [STOP] key.

When initialization is performed, all data and settings of the MRT-3 will return to the factory default condition, and the unit will restart.

If the operation is canceled, the unit comes on normally. OtherFunctions

ZOOM MRT-3 49

Image 49
Contents 8888 Safety Precautions Safety Precautions/ Usage PrecautionsBattery operation AC adapter operationHandling Usage PrecautionsContents MRT-3 IntroductionTop Panel Names of PartsRear Panel Connection Example Getting ConnectedTurn power to the MRT-3 on Using BatteriesTurn the unit over and open the battery compartment cover PreparationsPattern Terms Used in This ManualKit Preset kits Kit Kit03Pad/Pad Bank User kitsPress the Function key Listening to the Demo SongPress the Song key Playing the Pads Manual Play To switch the kit played by the pads, press the KIT keyPress the Pattern key Hit any padUse the Value +/- keys to select a kit number A01 Using Patterns Pattern ModeD05 @05 Playing a Pattern112 01-3114 Changing the Tempo of Pattern PlaybackReal-Time Pattern Recording @01EPress the Function key and then pad 3 Quantize While holding down the REC key, press the Play key Press the Function key againTap the pads in accordance with the metronome sound Adjust the tempo if necessaryPattern Step Recording To enter a rest, press the REC key Press the REC keyChanging the User Pattern Length Changing User Pattern Resolution After RecordingUse the Value +/- keys to set the new bar length Changing the User Pattern BeatUse the Value +/- keys to set the new beat Copy A05@05 Copying a PatternDEL @01Erasing a Single User Pattern Pattern mode, select the user pattern to be erased U01 U99ALL DEL @05EDeleting All User Patterns Pattern mode, with playback stopped, press the Function keyEditing a User Kit Creating Your Own Kit Kit ModePress the KIT key Press pad 1 or 3 7 to select the item to changeItems for individual pads instrument sound 1212Items common to entire kit Pad 1 PAD Inst Kit ItemsPad 3 Inst Tune Pad 5 Inst PANPad 7 Inst Level NormPad 4 KIT Level Pad 6 PAD Sens51@ 05PCopying a Kit Kit mode, select the kit to be used as copy sourceZoom MRT-3 What Is a Song? Creating Songs Song ModeSettings for entire song Settings for individual patterns@23 02 ERecording Song Patterns Use the Value +/- keys to select an empty song numberTo proceed to the next step, press the REC key EE020103 When one song is completed, press the Stop key0125 To listen to the song, press the Play keyChanging the Tempo Within a Song 122 Changing the Song VolumeHold down the Tempo key PAT When you have selected the kit, press the Function keySelecting a Dedicated Song Kit Hold down the Function keyChecking the Amount of Remaining Memory for Songs 0100Copying a Song Song mode, press the Function key, and then the Pattern keyDeleting a Song DELIf desired, you can delete all songs Deleting All SongsOther Functions Controlling the MRT-3 With a Foot SwitchStrt Use FS01 to set the tempo A7A5Use FS01 to control start/pause Use FS01 to control start/stopPattern mode, press the Function key and then pad 6 Midi Synchronizing Playback With an External DeviceInt Internal Midi Midi clockWhen rMt is selected as clock source Use the Value +/- keys to select the Midi or rMt settingMidi INT When the setting is complete, press the Function key againPlaying MRT-3 Sounds From an External Midi Component Press and hold the KIT keyUse the Value +/- keys to adjust the swing amount Setting the Pattern/Song Playback SwingPlay the external Midi sequencer or keyboard Setting the Precount for Real-Time Recording Hold down the REC key while turning power to the MRT-3 on Returning the MRT-3 to the Factory Default ConditionTroubleshooting Stereo OUT SpecificationsKit List ReferencePAD # Midi Note Number ChartCategory Inst # Name Instrument ListHI Hats KIT Pattern ListPOP01 HIP01 INTRO01 FCH Midi ImplementationDrum Machine Midi Implementation ChartDisplay IndexChanging the beat of a user Zoom Corporation