Zoom MRT-3 operation manual Pat, Selecting a Dedicated Song Kit, Hold down the Function key

Page 38

Creating Songs (Song Mode)

4.Hold down the [FUNCTION] key.

While the [FUNCTION] key is being pressed, the volume change information for that step is shown on the display. If no volume information is stored for that step, the indication is "---".

---

5.While holding down the [FUNCTION] key, use the [VALUE +/-] keys to set the volume value (0 – 63).

60

6.If desired, set the volume for other song steps as well by repeating steps 3 – 5.

7.When you have completed the volume change input, press the [STOP] key.

NOTE

It is not possible to record both tempo change information and volume change information in the same step. The most recently made setting will be valid.

Selecting a Dedicated Song Kit

Unless specified otherwise, the kits stored for the respective patterns will be used during playback of a song. (When the pattern is switched, the kit is also switched.) It is also possible to specify a dedicated song kit so that this kit will be used for the entire song.

1.In song mode, select the song for which you want to specify a kit.

2.Press the [FUNCTION] key and then the [KIT] key.

The kit number for that song is shown on the display. The default setting is "Pat", which means that the kit selected for the respective pattern will be used.

PAT

3.Use the [VALUE +/-] keys to select a dedicated kit for that song.

05P

4.When you have selected the kit, press the [FUNCTION] key.

38 ZOOM MRT-3

Image 38

Contents 8888 Battery operation Safety Precautions/ Usage PrecautionsSafety Precautions AC adapter operationUsage Precautions HandlingContents Introduction MRT-3Rear Panel Names of PartsTop Panel Getting Connected Connection ExampleTurn the unit over and open the battery compartment cover Using BatteriesTurn power to the MRT-3 on PreparationsTerms Used in This Manual PatternPad/Pad Bank Preset kits Kit Kit03Kit User kitsPress the Song key Listening to the Demo SongPress the Function key Press the Pattern key To switch the kit played by the pads, press the KIT keyPlaying the Pads Manual Play Hit any padUse the Value +/- keys to select a kit number D05 @05 Using Patterns Pattern ModeA01 Playing a Pattern114 01-3112 Changing the Tempo of Pattern PlaybackPress the Function key and then pad 3 Quantize @01EReal-Time Pattern Recording Press the Function key again While holding down the REC key, press the Play keyAdjust the tempo if necessary Tap the pads in accordance with the metronome soundPattern Step Recording Press the REC key To enter a rest, press the REC keyChanging User Pattern Resolution After Recording Changing the User Pattern LengthUse the Value +/- keys to set the new beat Changing the User Pattern BeatUse the Value +/- keys to set the new bar length @05 A05Copy Copying a PatternErasing a Single User Pattern @01DEL Pattern mode, select the user pattern to be erased U01 U99Deleting All User Patterns @05EALL DEL Pattern mode, with playback stopped, press the Function keyPress the KIT key Creating Your Own Kit Kit ModeEditing a User Kit Press pad 1 or 3 7 to select the item to changeItems common to entire kit 1212Items for individual pads instrument sound Pad 3 Inst Tune Kit ItemsPad 1 PAD Inst Pad 5 Inst PANPad 4 KIT Level NormPad 7 Inst Level Pad 6 PAD SensCopying a Kit 05P51@ Kit mode, select the kit to be used as copy sourceZoom MRT-3 Settings for entire song Creating Songs Song ModeWhat Is a Song? Settings for individual patternsRecording Song Patterns 02 E@23 Use the Value +/- keys to select an empty song numberEE02 To proceed to the next step, press the REC key 0125 When one song is completed, press the Stop key 0103 To listen to the song, press the Play keyChanging the Tempo Within a Song Hold down the Tempo key Changing the Song Volume122 Selecting a Dedicated Song Kit When you have selected the kit, press the Function keyPAT Hold down the Function keyCopying a Song 0100Checking the Amount of Remaining Memory for Songs Song mode, press the Function key, and then the Pattern keyDEL Deleting a SongDeleting All Songs If desired, you can delete all songsStrt Controlling the MRT-3 With a Foot SwitchOther Functions Use FS01 to control start/pause A7A5Use FS01 to set the tempo Use FS01 to control start/stopInt Internal Synchronizing Playback With an External DevicePattern mode, press the Function key and then pad 6 Midi Midi Midi clockMidi Use the Value +/- keys to select the Midi or rMt settingWhen rMt is selected as clock source Playing MRT-3 Sounds From an External Midi Component When the setting is complete, press the Function key againINT Press and hold the KIT keyPlay the external Midi sequencer or keyboard Setting the Pattern/Song Playback SwingUse the Value +/- keys to adjust the swing amount Setting the Precount for Real-Time Recording Returning the MRT-3 to the Factory Default Condition Hold down the REC key while turning power to the MRT-3 onTroubleshooting Specifications Stereo OUTReference Kit ListMidi Note Number Chart PAD #Instrument List Category Inst # NameHI Hats Pattern List KITPOP01 HIP01 INTRO01 Midi Implementation FCHMidi Implementation Chart Drum MachineIndex DisplayChanging the beat of a user Zoom Corporation