Pioneer VSX-1015TX operating instructions Speaker Distance, Surround Back Speaker Position

Page 48

06The System Setup menu

Note

•If you are using a Sound Pressure Level (SPL) meter, take the readings from your main listening position and adjust the level of each speaker to 75 dB SPL (C- weighting/slow reading).

•The subwoofer test tone is output at low volumes. You may need to adjust the level after testing with an actual soundtrack.

5When you’re finished, press RETURN. You will return to the Manual SP Setup menu.

Tip

•You can change the channel levels at any time by using EFFECT/CH SEL and +/– on the remote control. You can set separate levels for the listening modes (Standard, Home THX, Advanced and Stereo/Direct) as well as for the MULTI CH IN mode. However, the listening mode setting will be cleared if you use one of the setups (for example, System Setup or Auto Setup) to set the channel levels at a later date.

Speaker Distance

For good sound depth and separation from your system, you need to specify the distance of your speakers from the listening position. The receiver can then add the proper delay needed for effective surround sound.

1Select ‘Speaker Distance’ from the Manual SP Setup menu.

4.

Manual SP Setup

 

[

a. Speaker Setting

]

[

b. Crossover Network

]

[

c. Channel Level

]

[

d. Speaker Distance

]

[

e . THX Audio Setting

]

 

 

 

2Adjust the distance of each speaker using the (cursor left/right) buttons.

4d. Speaker Distance

 

Left

[

10.0ft

]

Center

[

10.0ft

]

Right

[

10.0ft

]

Surround R

[

10.0ft

]

Surr Back R

[

10.0ft

]

Surr Back L

[

10.0ft

]

Surround L

[

10.0ft

]

Sub Woofer

[

10.0ft

]

 

 

 

 

You can adjust the distance of each speaker in 0.5 feet increments.

3When you’re finished, press RETURN. You will return to the Manual SP Setup menu.

Tip

•For best surround sound, make sure the surround back speakers are the same distance from the listening position.

Surround Back Speaker Position

For the most effective results when using the THX Select2 Cinema and THX MusicMode listening modes (see Using the Home THX modes on page 32) with the Advanced Speaker Array (ASA) system (see About THX on page 73), it is required that you make the setting. See THX speaker system setup on page 22 for more on this.

Note

•If you don't have surround back speakers, or just have one, you won't be able to select this setting.

1Select ‘THX Audio Setting’ from the Manual SP Setup menu.

4.

Manual SP Setup

 

[

a. Speaker Setting

]

[

b. Crossover Network

]

[

c. Channel Level

]

[

d. Speaker Distance

]

[

e . THX Audio Setting

]

 

 

 

2Specify the distance of your surround back speakers from each other.

4e. THX Audio Setting

SB SP Position

[ 0 – 1 ft ]

SBL–SBR

•Surround speakers apart (best for THX surround sound).

•Surround speakers between apart.

•Surround speakers more than apart.

3When you're finished, press RETURN. You will return to the Manual SP Setup menu.

48

En

Page 47 Page 49
Image 48
Page 47 Page 49
Contents VSX-1015TX Wash hands after handling Information to UserImportant Safety Instructions Contents Other Settings Controlling the rest of your systemOther connections Additional informationFeatures Before you startBefore you start Chapter Checking what’s in the boxInstalling the receiver Before you start VentilationLoading the batteries Minute guide 02 5 minute guide ChapterIntroduction to home theater Listening to Surround SoundMinute guide Connect your speakers02 5 minute guide Make sure ‘Normal SB’ is selected then press EnterFollow the instructions on-screen Checking the settings on your DVD or other player Other problems when using the Auto Mcacc SetupPlaying a source Connecting up Connecting up ChapterAbout cable types Connecting up About the video converterConnecting up Connecting digital audio components CD recorder DVD or LD player CD playerConnecting up Connecting analog audio components Connecting multichannel analog componentsTip Connecting up Connecting video components Connecting to the front panel video terminalVideo Camera Connecting up Connecting antennas Using external antennasFM wire antenna AM loop antennaConnecting up Connecting the speakers Speaker terminalsTighten terminal Overhead view of speaker setup Hints on speaker placementConnecting up THX speaker system setupView of 7.1 channel speaker setup AC outletPower cord caution Operating other Pioneer componentsListening Mode Select Controls and displaysControls and displays Chapter Front panelControls and displays Controls and displays Display Stereo MonoTuned SleepControls and displays Remote control 6TUNE/ST +/- /ENTER DTV ON/OFFDTV Info Tuner DisplayOperating range of remote control unit Listening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Home THX modes THX Games ModeListening to your system PRO LOGIC+THXUsing the Advanced surround effects Dolby Pro Logic IIx Music settingsUse the +/- buttons to adjust the setting Press EFFECT/CH SEL again to adjust other settingsNeo6 Music settings Listening in stereoListening with Acoustic Calibration Listening to your system Choosing the input signal Type of source Extended Mode Standard / THX Type of source VirtualSB Mode Standard Using the tone controls Press SHIFT+DIALOG E to switch dialog enhancement on or offPress Tone to select the frequency you want to adjust Enhancing dialogUsing the sleep timer Listening to your system Playing other sourcesSelecting the multichannel analog inputs 30 minSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Surround back speaker settingSystem Setup menu Manual Mcacc speaker setupSelect the surround back speaker setting Select ‘MANUAL MCACC’ from the System Setup menuFine Channel Level Fine Channel DistanceSetting the Acoustic Calibration EQ automatically Copying your Acoustic Calibration EQ settingsAcoustic Calibration EQ Setting the Acoustic Calibration EQ manually Checking your Acoustic Calibration EQ settingsFront Align Manual speaker setup Select the setting you want to checkSelect ‘Manual SP Setup’ then press Enter Speaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuCrossover Network Channel LevelSelect ‘Speaker Distance’ from the Manual SP Setup menu Select ‘THX Audio Setting’ from the Manual SP Setup menuSpeaker Distance Surround Back Speaker PositionUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzMaking recordings Making recordings ChapterMaking an audio or a video recording Prepare the recorderSetting the remote to control other components Selecting preset codes directlyControlling the rest of your system Controlling the rest of your system ChapterUse cursor left/right to select Learn then press Enter Press the Receiver button to exit and store the operationsErasing all of the remote control presets Confirming preset codesDirect function Controlling the rest of your system Controls for TVs InputSelect DiscCD/MD/CD-R/DVD/LD SHIFT+Controlling the rest of your system Enter GuideHDD Shift + DVDSecond Zone speaker B setup Switching the speaker systemOther connections Other connections ChapterBi-wiring your speakers Other connections Bi-amping your front speakersFront left Speaker Other connections Connecting additional amplifiers Using this receiver with a Pioneer plasma displayUsing the SR+ mode with a Pioneer plasma display Other connectionsDVD player Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Other Setup menuAssigning the component video inputs Dynamic Range Control Setup Dual Mono SetupSelect ‘DRC Setup’ from the Other Setup menu Choose the setting that you wantLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysSelect ‘LFE ATT Setup’ from the Other Setup menu Select ‘SR+ Setup’ from the Other Setup menuTroubleshooting PowerAdditional information Additional information ChapterAdditional information No soundOther audio problems Digital inputs onVideo Audio components onSettings DisplayResetting the main unit Switching the speaker impedanceRemote control Press System Setup to confirmAdditional information Surround sound formats DolbyAbout THX Windows Media Audio 9 ProfessionalTHX Select2 Cinema mode THX Games ModeAdvanced Speaker Array ASA THX MusicModeAdditional information Specifications Cleaning the unitPioneer Corporation

VSX-1015TX specifications

The Pioneer VSX-1015TX is a distinguished piece of audio equipment that caters to enthusiasts seeking an all-encompassing home theater experience. Launched in the mid-2000s, this receiver combines advanced technology with usability, making it a popular choice among music and movie aficionados.

One of the defining features of the VSX-1015TX is its robust multi-channel surround sound system. It supports up to 7.1 channels, allowing users to fully immerse themselves in their favorite films, games, and music. With a power output of 110 watts per channel, it delivers rich sound quality across various formats, enhancing the auditory experience.

The VSX-1015TX is equipped with Dolby Digital and DTS decoding, providing a comprehensive sound stage that captures every detail. Its Multi-Channel Acoustic Calibration System (MCACC) optimizes audio output based on the physical characteristics of your room. This feature intelligently analyzes the acoustics and adjusts the speakers to achieve balanced sound, ensuring that listeners receive the best audio experience possible.

Furthermore, the receiver supports many audio and video formats, including MPEG, WMA, and MP3, making it versatile for different media sources. The inclusion of HDMI inputs allows for high-definition video and audio transmission, simplifying connectivity with modern devices like Blu-ray players and gaming consoles.

Another notable characteristic of the VSX-1015TX is its user-friendly interface. The on-screen display and remote control make navigating through settings and configurations straightforward. Users can easily switch between different audio sources and adjust sound parameters to suit their preferences.

Additionally, this model is designed with several speaker configurations in mind, allowing for flexible setups. Whether you are using conventional speakers or opting for surround sound systems, the VSX-1015TX caters to various configurations, making it suitable for different home theater environments.

The Pioneer VSX-1015TX also emphasizes build quality and durability, ensuring that it can withstand the rigors of regular use while maintaining performance levels. With its blend of advanced features, streamlined usability, and robust sound performance, the VSX-1015TX remains a cherished option for those looking to enhance their audio-visual experiences at home.
Top Page Image Contents