Pioneer HTZ-360DV manual Getting started Listening to the radio, Listening to other sources

Getting started 02

Listening to the radio

The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen.

1Press TUNER to switch to the tuner, then press repeatedly to select the AM or FM band. The display shows the band and frequency.

2Tune to a frequency.

There are three tuning modes—manual, auto, and high-speed:

•Manual tuning: Press TUNE +/– repeatedly to change the displayed frequency.

•Auto tuning: Press and hold TUNE +/– until the frequency display starts to move, then release. The tuner will stop on the next station it finds. Repeat to keep searching.

•High-speed tuning: Press and hold TUNE +/– until the frequency display starts to move rapidly. Keep the button held down until you reach the frequency you want. If necessary, fine tune the frequency using the manual tuning method.

Improving poor FM reception

If you’re listening to an FM station in stereo but the reception is weak, you can improve the sound quality by switching to mono.

1Tune to an FM radio station then press

SETUP.

2	Use	to choose FM MODE then press
ENTER.
3	Use	to select FM MONO then press
ENTER.

The mono indicator ( ) lights when the tuner is in mono reception mode.

Select FM AUTO above to switch back to auto- stereo mode (the stereo indicator ( ) lights when receiving a stereo broadcast).

Memorizing stations				English
stations without having to tune in manually
You can save up to 30 station presets so that
you always have easy access to your favorite
each time.
1	Tune to an AM or FM radio station.
				Deutsch
For the FM band, select mono or auto-stereo
reception as necessary. This setting is saved
along with the preset.
2	Press SETUP and use		to choose
‘ST.MEM.’ then press ENTER.				Français
3	Use	to select the station preset you

want then press ENTER.

Listening to station presets

1 Make sure the TUNER function is selected.			Italiano
preset.
2 Use the ST +/– buttons to select a station
• You can also use the number buttons to do
this.
			Nederlands
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
			Español
audio components on page 31 for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 23.
STANDBY	TUNER
/ON DVD/CD	(FM/AM)
		OPEN/
USB	LINE	CLOSE

AUDIO

1Make sure that the external source (TV, satellite receiver, etc.) is switched on.

2Press LINE to select the source.

3If necessary, start playback of the source.

13

En