Roland 5 manual Europa User Guide Europa Midi Implementation, IDI Message

Page 57

Europa User Guide

Europa MIDI Implementation

Europa’s MIDI transmission/reception capabilities

The following table describes all MIDI messages, how Europa responds to them, and whether or not they are transmitted by front panel actions. With this chart, it is assumed that Europa keeps in sync with the incoming MIDI messages even though some MIDI messages are ignored.

 

 

 

 

 

 

M IDI Message

R

T

Notes

 

 

X

X

 

 

 

 

 

 

 

Note on

X

X

Note on with a velocity of 0 is treated as a note off. Locally played

 

 

 

 

notes will transmit a note on command with a velocity of 0 when

 

 

 

 

a key is released, and a velocity of 70h when a key is pressed. Key

 

 

 

 

velocity may be mapped to VCA ENV-2level if transmit

 

 

 

 

velocity mode is enabled. Note velocity is ignored unless

 

 

 

 

assigned to a CC via velocity assign.

 

Note off

X

 

Same as a note on with velocity of 0

 

Poly aftertouch

 

 

Understood but no action taken

 

Control change

X

X

Transmits only when continuous controller transmit is enabled.

 

 

 

 

Always receives CCs.

 

Program change

X

X

Program changes 0-47 select patches in the current slot. Program

 

 

 

 

changes 64-95 select presets and will place the board in preset

 

 

 

 

mode.

 

Channel aftertouch

X

 

Only recognized if aftertouch assign is enabled.

 

Pitch bend

X

 

Only recognized if pitch bend assign is enabled. NOTE: Pitch

 

 

 

 

bend receives will not alter the pitch in a traditional pitch bend

 

 

 

 

fashion!

 

Sysex messages

X

X

Europa will only respond to system exclusive messages with the

 

 

 

 

Europa signature and will ignore all others.

 

Song position pointer

X

 

Understood but no action taken

 

Song select

X

 

Understood but no action taken

 

Tune request

X

X

Europa transmits a tune request on powerup and press of the

 

 

 

 

tune button.

 

MIDI Clock

X

X

Sent only when the arpeggiator is running and set to internal

 

 

 

 

clock.

 

MIDI Start

X

X

Transmitted when the arpeggiator is enabled, set to internal

 

 

 

 

clock, and the first note is pressed. If received and arpeggiator is

 

 

 

 

enabled, the arpeggiator starts.

 

MIDI Continue

X

 

If the arpeggiator is enabled, the arpeggiator continues from the

 

 

 

 

point where it stopped.

 

MIDI Stop

X

X

Transmitted when the arpeggiator is turned off. If received when

 

 

 

 

the arpeggiator is enabled, the arpeggiator stops.

 

Active sensing

X

 

Understood but no action taken

 

System reset

X

 

Understood but no action taken

 

Running status

X

 

Received and memorized for all channel voice messages. Base

 

 

 

 

MIDI Channel 1 assumed on board powerup. Europa will need to

 

 

 

 

receive at least one full channelized MIDI message to synchronize

 

 

 

 

with the MIDI stream.

Figure 13 - Europa's overall MIDI reception and transmission capabilities

Continuous controllers supported

The following table is a layout and description of each of the continuous controllers that Europa receives and/or transmits. It is assumed that the reader understand binary notation, as it is used in the descriptions of several of the continuous controllers.

Page 57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Page Trademarks What’s on disc Europa User Guide Table Of ContentsVoice assignment modes Table Of Contents Europa User GuideBoot block Europa Common problemsArpeggiator step rhythm programming buttons Arpeggiator mode and options when the UP button is HeldEuropa User Guide Terminology and symbols Introduction Europa User Guide Tape BoldAdditional arpeggiator modes New feature summary Europa User GuideEuropa User Guide New feature summary What is not included Arpeggiator, voice, and synchronization structure Europa User Guide Operational differencesOperational differences Europa User Guide Additional voice assignment modes Power up diagnostics Power up diagnostics and actions Europa User GuideEuropa User Guide Power up diagnostics and actions To F-5 Europa boot and diagnostic flowchart Internal CPU stack RAM is tested Jig mode is tested Tape Button is testedInternal CPU Xram is tested External scratch RAM is testedBender Write + TapeSelection Base Midi channel Setting the Jupiter 6’s base Midi channelLED on LED BlinkingLED Off C D E F Aftertouch assign LFO Delay Manual Cross MOD VCO 1 Range VCA LFOENV-1 Key track ENV-2 Key track Solo Solo assign LED lit solid Europa User Guide Voice assignment modesWhole Split Voice assignment modes Europa User GuidePoly 2 steal Poly 2 LED blinking Arpeggiator Europa User Guide Europa User GuideArpeggiator Midi Clock Sources of notes to be played and keyboard/MIDI interaction Europa User Guide ArpeggiatorArpeggio note List Sequence note Arpeggio note calculator takes the note to play Internal clock a Arpeggiator mode and options when the UP button is held E F G a B Random mode Sequence modes and optionsRecording a sequence Arpeggiator step rhythm programming buttons Europa User Guide Arpeggiator Transfer patches from tape to Europa? How do I……..? Europa User GuideEuropa User Guide How do I……..? Save all patches and presets to MIDI? Can’t get any sound out of Europa from the local keyboard Europa User Guide Common problemsCommon problems Europa User Guide Hear unplayed or missing notes in my arpeggiations Arpeggiator runs too fast/slow or doesn’t stay in sync Windows firmware update utility Europa User Guide Europa Firmware Update UtilityEuropa Firmware Update Utility Europa User Guide Locate an image to update Update the Jupiter Apple Macintosh Europa Firmware Update Utility Locate an image to update Update the Jupiter Basic Midi functionality Europa Midi Implementation Europa User GuideIDI Message Europa User Guide Europa Midi ImplementationVCO MOD =LOWER SPLIT, 127=UPPER SplitLFO ENVVCO Mixer VCF LFOVCA ENV Unison PWMVCO LOWER/UPPE KEY ModeLower Upper Lower SPLIT, 127= Upper SplitEuropa Midi Implementation Europa User Guide Europas Continuous Controller map BPM F0h Command 02h Set Europas base Midi channel VCO MOD LFO Europa User GuideEuropa Midi ImplementationXmod Manual VCO MOD ENVVCF LFO 1 mod VCA ENV 2 LevelPWM LFO Europa Midi Implementation Europa User Guide Upper /WHOLE UPPER/WHOLEA1-F8 Whole Lower Upper WholeCommand 07h Assign controller F0h 41h 10h 4ah 36h 00h 68h 36h f7h Europa User Guide Europa Internal Architecture Boot blockVisit Synthcom on the internet Contact Information Europa User GuideUser installed Europa upgrades Europa User Guide Europa Limited WarrantyEuropa Limited Warranty Europa User Guide Europa User Guide Acknowledgements AcknowledgementsEuropa supermode reference sheet Arpeggiator mode and options when the UP button is held
Top Page Image Contents