Roland 5 manual Upper Whole, Lower

Page 74

	Europa MIDI Implementation					Europa User Guide


		Byte #	Valid	Name	Description
			range
		2	0-1	UPPER (WHOLE)/	Arpeggiator rhythm/sequence destination:
				LOWER
				rhythm/sequence	7eh – Store to upper arpeggiator rhythm/sequence
				select	7fh – Store to lower arpeggiator rhythm/sequence
		3-6	0-15	Rhythm	Arpeggiator step rhythm represented as follows:
			(for
			each		Byte 1: Bits 3-0
			byte)		Bit 0 –	Beat 1 (1=Step, 0=No step)
					Bit 1 –	Beat 2 (1=Step, 0=No step)
					Bit 2 –	Beat 3 (1=Step, 0=No step)
					Bit 3 –	Beat 4 (1=Step, 0=No step)
					Bits 4-7 –	Unused – set to 0
					Byte 2: Bits 3-0
					Bit 0 –	Beat 5 (1=Step, 0=No step)
					Bit 1 –	Beat 6 (1=Step, 0=No step)
					Etc….
					Bits 4-7 Are required to be set to 0. The incoming
					message will be ignored if any of these bits are set.
		7-N (max	0-127	Note sequence	Notes that make up this sequence. The note numbers
		of 16			are the same as MIDI notes. If no notes are provided,
		notes)			this will clear the sequence for the appropriate edit. If
					there are more than 16 notes present, the entire
					command is ignored.

Figure 24 - Arpeggiator rhythm/sequence save format (block type 011)

Instructs Europa to write an arpeggiator step rhythm/sequence to either the upper or lower step rhythm edits.


	Byte #	Value	Description
	0	06h	Write patch edit, preset edit, or sequence edit to flash
	1	Bitwise	Bit 7	Unused – set to 0
			Bits 6-4 Block type to write to flash:
				000 – UPPER /WHOLE patch edit
				001 – LOWER patch edit
				010 – Preset edit
				011-111 – Not valid - Command will be ignored
			Bits 3-0	Unused – set to 0 (other values will invalidate the message causing
				the command to be ignored.
	2	Depends	Write UPPER /WHOLE or LOWER patch edit to flash (000 or 001 on bits 6-4):
		on block		00h-2fh – A1-F8– Destination (in flash) to write patch edit
		type	Write preset edit (001 on bits 6-4):
				00h-1fh – A1-D8– Destination (in flash) to write preset edit
			Figure 25 – Command 06h - Write patch or preset edit to flash

Instructs Europa to write the currently active patch or preset edit to flash. This command acts as if the user has written a preset or patch to flash. Any invalid bits being set will cause this command to be ignored. The command will also be ignored if the Jupiter 6’s memory write protect is on.

Page 74

Image 74

Contents Page Trademarks Europa User Guide Table Of Contents What’s on discTable Of Contents Europa User Guide Voice assignment modesCommon problems Boot block EuropaArpeggiator mode and options when the UP button is Held Arpeggiator step rhythm programming buttonsEuropa User Guide Terminology and symbols Introduction Europa User Guide Bold TapeNew feature summary Europa User Guide Additional arpeggiator modesEuropa User Guide New feature summary What is not included Europa User Guide Operational differences Arpeggiator, voice, and synchronization structureOperational differences Europa User Guide Additional voice assignment modes Power up diagnostics and actions Europa User Guide Power up diagnosticsEuropa User Guide Power up diagnostics and actions To F-5 Europa boot and diagnostic flowchart Internal CPU Xram is tested Jig mode is tested Tape Button is testedInternal CPU stack RAM is tested External scratch RAM is testedWrite + Tape BenderSetting the Jupiter 6’s base Midi channel Selection Base Midi channelLED Off LED onLED Blinking C D E F Aftertouch assign ENV-1 Key track ENV-2 Key track LFO Delay Manual Cross MOD VCO 1 RangeVCA LFO Europa User Guide Voice assignment modes Solo Solo assign LED lit solidVoice assignment modes Europa User Guide Whole SplitPoly 2 steal Poly 2 LED blinking Arpeggiator Europa User Guide Arpeggiator EuropaUser Guide Midi Clock Europa User Guide Arpeggiator Sources of notes to be played and keyboard/MIDI interactionArpeggio note List Sequence note Arpeggio note calculator takes the note to play Internal clock a Arpeggiator mode and options when the UP button is held Random mode Sequence modes and options E F G a BRecording a sequence Arpeggiator step rhythm programming buttons Europa User Guide Arpeggiator How do I……..? Europa User Guide Transfer patches from tape to Europa?Europa User Guide How do I……..? Save all patches and presets to MIDI? Europa User Guide Common problems Can’t get any sound out of Europa from the local keyboardCommon problems Europa User Guide Hear unplayed or missing notes in my arpeggiations Arpeggiator runs too fast/slow or doesn’t stay in sync Europa User Guide Europa Firmware Update Utility Windows firmware update utilityEuropa Firmware Update Utility Europa User Guide Locate an image to update Update the Jupiter Apple Macintosh Europa Firmware Update Utility Locate an image to update Update the Jupiter Europa Midi Implementation Europa User Guide Basic Midi functionalityEuropa User Guide Europa Midi Implementation IDI MessageLFO =LOWER SPLIT, 127=UPPER SplitVCO MOD ENVVCA ENV VCO MixerVCF LFO VCO UnisonPWM Lower Upper KEY ModeLOWER/UPPE Lower SPLIT, 127= Upper SplitEuropa Midi Implementation Europa User Guide Europas Continuous Controller map BPM F0h Command 02h Set Europas base Midi channel Europa User GuideEuropa Midi Implementation VCO MOD LFOVCF LFO 1 mod VCO MOD ENVXmod Manual VCA ENV 2 LevelPWM LFO Europa Midi Implementation Europa User Guide UPPER/WHOLE Upper /WHOLEA1-F8 Whole Upper Whole LowerCommand 07h Assign controller F0h 41h 10h 4ah 36h 00h 68h 36h f7h Boot block Europa User Guide Europa Internal ArchitectureContact Information Europa User Guide Visit Synthcom on the internetEuropa User Guide Europa Limited Warranty User installed Europa upgradesEuropa Limited Warranty Europa User Guide Acknowledgements Europa User Guide AcknowledgementsArpeggiator mode and options when the UP button is held Europa supermode reference sheet