Roland MC-09 owner manual Applying an effect, Specifying the effect routing

Page 41

Applying an effect

The MC-09 offers four effects: filter, isolator, phaser, and slicer. You can

select one of these and apply it to the external input or a loop.

Specifying the effect routing

fig.4-1**_80

[SHIFT]

+

[LINE IN]

INPUT

			OUTPUT
1	2	3	4
			AUDIOLOOPER
		[SHIFT]
		+
		[SEL4]
		[SHIFT]
		+
		[SEL3]
	[SHIFT]
	+
	[SEL2]
[SHIFT]
+
[SEL1]
	EFFECTS

It is not possible to apply an effect if you’ve selected a pattern from the LEAD, BASS, or RHYTHM groups. To obtain the same result, you can capture the pattern playback and then apply an effect.

The effect routing will be remembered until you turn off the power.

1

Press the [EFFECTS] button.

2

Hold down the [SHIFT] button and press the [LINE IN] button to specify whether the effect will be applied to the external input.

[LINE IN] button indicator lit: The effect will be applied to the external input

[LINE IN] button indicator blinking: The effect will not be applied to the external input

3

Hold down the [SHIFT] button and press the [SEL] button of a part to specify whether the effect will be applied to that part.

[SEL] button indicator lit: Apply the effect to the part

[SEL] button indicator blinking: Don’t apply the effect to the part

When you press the [EFFECTS] button for the first time after turning on the power, the effect will be applied to the external input and to all parts.

41

Image 41

Contents Listening to the demo performance Page Page Placement Power SupplyMaintenance Additional PrecautionsSaving data Restoring the factory settings Factory ResetAbout the display About the included CDContents Using a memory card DSP Synthesizer Section Names of things and what they doFront Panel Common Section Audio Looper SectionDC in Jack Rear PanelWays to use the MC-09 Main features and usesMain features Making connections Turning the power off Turning the power on/offTurning the power on Playing and creating patterns Using the MC-09 as a synthesizerWhat is a pattern? Playing a pattern PlayingPress the Play button to play back the pattern To stop the pattern, press the Stop buttonUse the INC and DEC buttons to select a pattern Selecting a patternUse the INC and DEC buttons to set the tempo Adjusting the tempo of a patternPress the keyboard pads to play them Playing the keyboard padsSelect a pattern Display will show the Octave Shift setting Changing the sound of a pattern Using the knobs to edit the settings of the soundModifying the sound When you are finished making settings, press the Exit button Editing other sound settingsAdjusting the pitch Adjusting the panUse the INC and DEC buttons to adjust the pan setting Use the INC and DEC buttons to adjust the transpose settingTR recording Creating a phrase RecordingPreparations for recording Press the Setup buttonSelect a pattern p Press the Exit buttonCreating a melody or backing phrase Step Recording Make sure that the Keyboard button indicator is darkRepeat steps 13-15 to create your phrase Press a keyboard pad to specify the note pitchCreating a drum phrase TR Recording Use the C2 knob to adjust the velocity volumeTo exit Step Edit mode, press the Exit or Button Stop Press the Play button8b80 To exit Step Edit mode, press the Stop or Exit buttonEditing a phrase When you’ve finished editing, press the Stop or Exit buttonPress the Write button Saving a patternPress the Write button to execute Press the Write button to writeCreating and playing a loop What is a loop?Make preparations for capture Process of creating a loopStop capturing Recording capturingPress the Capture button to start capture Press the SEL button of the part that you want to hear Auditioning a loop PreviewMake sure that a pattern or effect control is not playing Playback Adjusting the volume balance of the partsTo begin loop playback, press the Play button To stop loop playback, press the Stop buttonApplying effects Muting or un-muting a partChanging the tempo To defeat muting, press the Status button once againPosition Length Changing the settings of partPress the Loop Merge button Combining several parts into one Loop MergeSaving the steps by which you created a loop Process Patch Erasing the contents of a partPlaying back a process patch Saving a process patchSpecifying the effect routing Applying an effectPress the Effects button so its indicator lights Rapidly switching the effect on/offTurning the effect on/off Selecting an effect patternUse the INC and DEC buttons to select an effect pattern Using the knobs to adjust the effectSettings Changing the effect type Use the INC and DEC buttons to change the effect type Creating consecutive changes in an effect Effect ControlTo stop playback, press the Stop button Using effect control to performMaking effect control settings Display will indicate the effect control length Following data will be saved Saving your effect settingsNormal playback and Loop Control PitchDivide times TriggerRealtime pitch performance Using loop control for realtime performanceRealtime performance using Divide times Realtime performance using TriggerSelect a pattern or effect pattern that uses Loop Control Playing back a loop with Loop ControlMaking loop control settings Type Value Explanation Turn the C3 knob to input the desired valueSaving your loop control settings Setting the tempo with the TAP button Setting the tempo manuallyAbout the tempo Checking the standard tempoFormatting a memory card Using a memory cardMemory cards usable with the MC-09 Deleting a saved loop from memory card Saving a loop to a memory cardLoading a loop Deleting saved MC-09 settings from a memory card Saving all settings of the MC- 09 to a memory cardLoading MC-09 settings Midi signal flow Connecting external Midi devicesSetting the Midi channel Using the MC-09 as the masterSynchronizing an external Midi sequencer Controlling an external Midi deviceControlling the MC-09 from an external Midi device Using the MC-09 as the slavePlaying the MC-09 from an external Midi device Synchronizing the MC-09 to an external Midi sequencer Using the MC-09 with your computerRestoring MC-09 data from an external Midi sequencer Saving MC-09 data on an external Midi sequencerHow the MC-09 is organized Audio signal flowDSP synthesizer Step sequencer Audio looperCommon condition What knobs doRecording condition OthersCommon to Lead and Bass Parameter listDSP synthesizer parameters Lead Effects Operation System parametersProblem Cause Action TroubleshootingE01 Error messagesMidi Implementation Chart DSP Synthesizer SpecificationsSound List Preset Pattern Lead GroupPreset Pattern Bass Group Pattern Name Ctrl Preset Pattern Rhythm GroupLEAD/BASS Tone Preset Pattern Effects GroupUser Pattern TRI Rhythm SetMemo Memo Index Index Performance Operation mapCapture RecordingMake loop control settings Make effect control settingsEdit a phrase in pattern Save the pattern/effect pattern/loop control patternLead Rhythm Bass Effects Blank ChartAvis Africa Information