Roland MC-09 Realtime performance using Trigger, Realtime performance using Divide times

Changing the way in which a loop plays (Loop Control)

Realtime performance using Trigger

You can play parts 1–4 by pressing the step [1]–[4] buttons. This is

convenient for live performance.

1

Load the loop that you want to play into part 1–4 (p. 59).

2

Press the [LOOP CTRL] button so its indicator lights.

Loop control will be turned on.

3

Press the [DISPLAY] button so the TONE/TYPE indicator lights.

4

Press the [INC] or [DEC] button to get the “ ” display.

5

Press the step [1]–[4] button for the part you want to play.

While you hold down the step [1]–[4] button, the corresponding part will

sound. However, it will not play back repeatedly.

6

When you are finished with trigger performance, press the

[LOOP CTRL] button so the indicator goes out.

Realtime performance using Divide times 16

You can play each divided section of the sound by pressing the step [1]–[16]

buttons. This lets you recreate a loop as a new performance.

1

Load the loop that you want to play into part 1 (p. 59).

2

Press the [LOOP CTRL] button so its indicator lights.

Loop control will be turned on.

3

Press the [DISPLAY] button so the TONE/TYPE indicator lights.

4

Press the [INC] or [DEC] button until “ ” appears in the display.

The loop will be divided into 16 or 12 sections.

If you want to divide the loop into 12 sections, press the [SETUP] button, then press the [SCALE] button so its indicator lights.

52