Roland owner manual Saving MC-09 data on an external Midi sequencer

Page 65

10.Press the [INC] or [DEC] button until the display

indicates “ ”(OFF).

With these settings, the MC-09 will receive MIDI messages from your computer, and the DSP synthesizer (pattern tone/ rhythm set) will sound.

11.Press the [SETUP] button to complete the settings.

Saving the MC-09 settings to an external sequencer (Bulk Dump)

Data for the currently selected pattern, process patch or all saved settings, can be transmitted to an external MIDI device. This function is called bulk dump. You can create a backup of the MC-09’s data by using bulk dump to record the data on an external MIDI sequencer. You can also use this function to replicate the current settings of one MC-09 (except for the Loop setting) on another MC-09.

Saving MC-09 data on an external MIDI sequencer

1.Use a MIDI cable to connect the MC-09’s MIDI OUT to the MIDI IN of your external MIDI sequencer.

2.Press the [SETUP] button.

3.Press the [INC] or [DEC] button until the display

indicates “ ”(Bulk Dump).

4.Press the [ENTER] button.

5.Use the [INC] and [DEC] buttons to select the data that you want to save.

: Settings for the currently selected pattern

: Process patches

: All patterns, process patches, and system settings

6.Press the [ENTER] button.

The display will blink “ ”(Sure), asking you to confirm the operation.

If you decide to cancel, press the [EXIT] button.

7.Begin recording on your external MIDI sequencer.

8.Press the [ENTER] button to initiate the bulk dump.

While the data is being transmitted, the indication in the display will blink. When transmission is completed, the

display will show .

9.Stop recording on your external MIDI sequencer.

10.Press the [EXIT] button to complete the bulk dump.

Connecting external MIDI devices

Restoring MC-09 data from an external MIDI sequencer

The data that was saved by a bulk dump is referred to as bulk data. By loading this bulk data, you can reproduce the state in which the MC-09 was when it transmitted the bulk data.

1.Use a MIDI cable to connect the MC-09’s MIDI IN to the MIDI OUT of the external MIDI sequencer.

2.Press the [SETUP] button.

3.Press the [INC] or [DEC] button until the display

indicates “ ”(Bulk Receive).

4.Press the [ENTER] button.

The MC-09 will wait to receive bulk data.

If you decide to cancel, press the [EXIT] button.

5.Play back your external MIDI sequencer to transmit the bulk data to the MC-09.

While the MC-09 is receiving bulk data, the display will blink.

When bulk data reception ends, the display will indicate

“ ”. This display will continue for approximately 60 seconds.

*Never turn off the power while “ ” appears in the display. Doing so will damage the data in the memory card and internal memory.

*You must transmit all of the bulk data.

6.Press the [EXIT] button to complete the operation, after

the display indicates “ ”.

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Listening to the demo performance Page Page Placement Power SupplyMaintenance Additional PrecautionsSaving data Restoring the factory settings Factory ResetAbout the display About the included CDContents Using a memory card DSP Synthesizer Section Names of things and what they doFront Panel Common Section Audio Looper SectionDC in Jack Rear PanelWays to use the MC-09 Main features and usesMain features Making connections Turning the power off Turning the power on/offTurning the power on Playing and creating patterns Using the MC-09 as a synthesizerWhat is a pattern? Playing a pattern PlayingPress the Play button to play back the pattern To stop the pattern, press the Stop buttonUse the INC and DEC buttons to select a pattern Selecting a patternUse the INC and DEC buttons to set the tempo Adjusting the tempo of a patternPress the keyboard pads to play them Playing the keyboard padsSelect a pattern Display will show the Octave Shift setting Changing the sound of a pattern Using the knobs to edit the settings of the soundModifying the sound When you are finished making settings, press the Exit button Editing other sound settingsAdjusting the pitch Adjusting the panUse the INC and DEC buttons to adjust the pan setting Use the INC and DEC buttons to adjust the transpose settingTR recording Creating a phrase RecordingPreparations for recording Press the Setup buttonSelect a pattern p Press the Exit buttonCreating a melody or backing phrase Step Recording Make sure that the Keyboard button indicator is darkRepeat steps 13-15 to create your phrase Press a keyboard pad to specify the note pitchCreating a drum phrase TR Recording Use the C2 knob to adjust the velocity volumeTo exit Step Edit mode, press the Exit or Button Stop Press the Play button8b80 To exit Step Edit mode, press the Stop or Exit buttonEditing a phrase When you’ve finished editing, press the Stop or Exit buttonPress the Write button Saving a patternPress the Write button to execute Press the Write button to writeCreating and playing a loop What is a loop?Make preparations for capture Process of creating a loopStop capturing Recording capturingPress the Capture button to start capture Press the SEL button of the part that you want to hear Auditioning a loop PreviewMake sure that a pattern or effect control is not playing Playback Adjusting the volume balance of the partsTo begin loop playback, press the Play button To stop loop playback, press the Stop buttonApplying effects Muting or un-muting a partChanging the tempo To defeat muting, press the Status button once againPosition Length Changing the settings of partPress the Loop Merge button Combining several parts into one Loop MergeSaving the steps by which you created a loop Process Patch Erasing the contents of a partPlaying back a process patch Saving a process patchSpecifying the effect routing Applying an effectPress the Effects button so its indicator lights Rapidly switching the effect on/offTurning the effect on/off Selecting an effect patternUse the INC and DEC buttons to select an effect pattern Using the knobs to adjust the effectSettings Changing the effect type Use the INC and DEC buttons to change the effect type Creating consecutive changes in an effect Effect ControlTo stop playback, press the Stop button Using effect control to performMaking effect control settings Display will indicate the effect control length Following data will be saved Saving your effect settingsNormal playback and Loop Control PitchDivide times TriggerRealtime pitch performance Using loop control for realtime performanceRealtime performance using Divide times Realtime performance using TriggerSelect a pattern or effect pattern that uses Loop Control Playing back a loop with Loop ControlMaking loop control settings Type Value Explanation Turn the C3 knob to input the desired valueSaving your loop control settings Setting the tempo with the TAP button Setting the tempo manuallyAbout the tempo Checking the standard tempoFormatting a memory card Using a memory cardMemory cards usable with the MC-09 Deleting a saved loop from memory card Saving a loop to a memory cardLoading a loop Deleting saved MC-09 settings from a memory card Saving all settings of the MC- 09 to a memory cardLoading MC-09 settings Midi signal flow Connecting external Midi devicesSetting the Midi channel Using the MC-09 as the masterSynchronizing an external Midi sequencer Controlling an external Midi deviceControlling the MC-09 from an external Midi device Using the MC-09 as the slavePlaying the MC-09 from an external Midi device Synchronizing the MC-09 to an external Midi sequencer Using the MC-09 with your computerRestoring MC-09 data from an external Midi sequencer Saving MC-09 data on an external Midi sequencerHow the MC-09 is organized Audio signal flowDSP synthesizer Step sequencer Audio looperCommon condition What knobs doRecording condition OthersCommon to Lead and Bass Parameter listDSP synthesizer parameters Lead Effects Operation System parametersProblem Cause Action TroubleshootingE01 Error messagesMidi Implementation Chart DSP Synthesizer SpecificationsSound List Preset Pattern Lead GroupPreset Pattern Bass Group Pattern Name Ctrl Preset Pattern Rhythm GroupLEAD/BASS Tone Preset Pattern Effects GroupUser Pattern TRI Rhythm SetMemo Memo Index Index Performance Operation mapCapture RecordingMake loop control settings Make effect control settingsEdit a phrase in pattern Save the pattern/effect pattern/loop control patternLead Rhythm Bass Effects Blank ChartAvis Africa Information
Top Page Image Contents