Roland MC-09 Controlling an external Midi device, Synchronizing an external Midi sequencer

Page 62

Connecting external MIDI devices

Controlling an external MIDI device

You can operate the MC-09’s knobs and keyboard pads to switch sounds on an external MIDI device or modify its settings.

1.Set the MC-09 and the external MIDI device to the same MIDI channel (p. 61).

2.Press the [SETUP] button.

3.Press the [INC] or [DEC] button until the display

indicates “ ”(Tx. Program Change).

4.Press the [ENTER] button.

5.Press the [INC] or [DEC] button until the display

indicates “ ”(ON).

With this setting, when you switch pattern, effect pattern, or loop control pattern on the MC-09, the external MIDI device will also switch sounds.

6.Press the [SETUP] button to complete the setting.

7.Make settings on your external MIDI device.

Make settings on your external MIDI device so that it will receive MIDI messages. For details, refer to the owner’s manual for your device.

8.Play the MC-09, or operate its knobs and keyboard pads.

The external MIDI device will play sounds or switch sound settings accordingly.

Synchronizing an external MIDI sequencer

Here’s how you can make an external MIDI sequencer play back in synchronization with the tempo of the MC-09.

For details on setting the tempo of the MC-09, refer to “About tempo” (p. 57).

1.Set the MC-09 and the external MIDI device to the same MIDI channel (p. 61).

2.Press the [SETUP] button.

3.Press the [INC] or [DEC] button until the display

indicates “ ”(Sync Mode).

4.Press the [ENTER] button.

5.Make sure that the display shows

“ ”(INTERNAL).

With this setting, the external MIDI sequencer will synchronize to the tempo of the MC-09.

6.Press the [EXIT] button.

7.Press the [INC] or [DEC] button until the display

indicates “ (Sync Out).”

8.Press the [ENTER] button.

9.Press the [INC] or [DEC] button until the display

indicates “ ”(ON).

With this setting, the MC-09 will transmit tempo messages to the external MIDI sequencer.

10.Press the [SETUP] button to complete the setting.

11.Make settings on your external MIDI sequencer.

Set your external MIDI sequencer to synchronize to an external MIDI clock. For details, refer to the owner’s manual for your sequencer.

12.Press the MC-09’s [ ](PLAY) button.

Your external MIDI sequencer will also begin playing.

13.To stop playback, press the [ ](STOP) button.

62

Image 62

Contents Listening to the demo performance Page Page Maintenance Power SupplyPlacement Additional PrecautionsAbout the display Restoring the factory settings Factory ResetSaving data About the included CDContents Using a memory card DSP Synthesizer Section Names of things and what they doFront Panel Audio Looper Section Common SectionRear Panel DC in JackWays to use the MC-09 Main features and usesMain features Making connections Turning the power off Turning the power on/offTurning the power on Playing and creating patterns Using the MC-09 as a synthesizerWhat is a pattern? Press the Play button to play back the pattern PlayingPlaying a pattern To stop the pattern, press the Stop buttonSelecting a pattern Use the INC and DEC buttons to select a patternAdjusting the tempo of a pattern Use the INC and DEC buttons to set the tempoPress the keyboard pads to play them Playing the keyboard padsSelect a pattern Display will show the Octave Shift setting Changing the sound of a pattern Using the knobs to edit the settings of the soundModifying the sound Editing other sound settings When you are finished making settings, press the Exit buttonUse the INC and DEC buttons to adjust the pan setting Adjusting the panAdjusting the pitch Use the INC and DEC buttons to adjust the transpose settingCreating a phrase Recording TR recordingSelect a pattern p Press the Setup buttonPreparations for recording Press the Exit buttonMake sure that the Keyboard button indicator is dark Creating a melody or backing phrase Step RecordingPress a keyboard pad to specify the note pitch Repeat steps 13-15 to create your phraseTo exit Step Edit mode, press the Exit or Button Stop Use the C2 knob to adjust the velocity volumeCreating a drum phrase TR Recording Press the Play buttonTo exit Step Edit mode, press the Stop or Exit button 8b80When you’ve finished editing, press the Stop or Exit button Editing a phrasePress the Write button to execute Saving a patternPress the Write button Press the Write button to writeWhat is a loop? Creating and playing a loopProcess of creating a loop Make preparations for captureStop capturing Recording capturingPress the Capture button to start capture Press the SEL button of the part that you want to hear Auditioning a loop PreviewMake sure that a pattern or effect control is not playing To begin loop playback, press the Play button Adjusting the volume balance of the partsPlayback To stop loop playback, press the Stop buttonChanging the tempo Muting or un-muting a partApplying effects To defeat muting, press the Status button once againChanging the settings of part Position LengthCombining several parts into one Loop Merge Press the Loop Merge buttonErasing the contents of a part Saving the steps by which you created a loop Process PatchSaving a process patch Playing back a process patchApplying an effect Specifying the effect routingTurning the effect on/off Rapidly switching the effect on/offPress the Effects button so its indicator lights Selecting an effect patternUse the INC and DEC buttons to select an effect pattern Using the knobs to adjust the effectSettings Changing the effect type Creating consecutive changes in an effect Effect Control Use the INC and DEC buttons to change the effect typeTo stop playback, press the Stop button Using effect control to performMaking effect control settings Display will indicate the effect control length Saving your effect settings Following data will be savedPitch Normal playback and Loop ControlTrigger Divide timesUsing loop control for realtime performance Realtime pitch performanceRealtime performance using Trigger Realtime performance using Divide timesPlaying back a loop with Loop Control Select a pattern or effect pattern that uses Loop ControlMaking loop control settings Turn the C3 knob to input the desired value Type Value ExplanationSaving your loop control settings About the tempo Setting the tempo manuallySetting the tempo with the TAP button Checking the standard tempoFormatting a memory card Using a memory cardMemory cards usable with the MC-09 Deleting a saved loop from memory card Saving a loop to a memory cardLoading a loop Deleting saved MC-09 settings from a memory card Saving all settings of the MC- 09 to a memory cardLoading MC-09 settings Setting the Midi channel Connecting external Midi devicesMidi signal flow Using the MC-09 as the masterControlling an external Midi device Synchronizing an external Midi sequencerControlling the MC-09 from an external Midi device Using the MC-09 as the slavePlaying the MC-09 from an external Midi device Using the MC-09 with your computer Synchronizing the MC-09 to an external Midi sequencerSaving MC-09 data on an external Midi sequencer Restoring MC-09 data from an external Midi sequencerDSP synthesizer Step sequencer Audio signal flowHow the MC-09 is organized Audio looperRecording condition What knobs doCommon condition OthersCommon to Lead and Bass Parameter listDSP synthesizer parameters Lead Effects System parameters OperationTroubleshooting Problem Cause ActionError messages E01Midi Implementation Chart Specifications DSP SynthesizerSound List Preset Pattern Lead GroupPreset Pattern Bass Group Preset Pattern Rhythm Group Pattern Name CtrlLEAD/BASS Tone Preset Pattern Effects GroupUser Pattern Rhythm Set TRIMemo Memo Index Index Capture Operation mapPerformance RecordingEdit a phrase in pattern Make effect control settingsMake loop control settings Save the pattern/effect pattern/loop control patternBlank Chart Lead Rhythm Bass EffectsAvis Information Africa