Roland MC-09 owner manual Using loop control for realtime performance, Realtime pitch performance

Changing the way in which a loop plays (Loop Control)

Using loop control for realtime performance

Realtime pitch performance

You can use the step [1]–[16] buttons to play part 1 at different pitches.

*There will be no sound if you exceed a range of one octave higher or lower than the original pitch of part 1.

1

2

3

4

5

6

Load the loop that you want to play into part 1 (p. 59).

Press the [LOOP CTRL] button so its indicator lights.

Loop control will be turned on.

Press the [DISPLAY] button so the TONE/TYPE indicator lights.

Press the [INC] or [DEC] button to get the “ ” display.

Perform the sound by pressing the step [1]–[16] button corresponding to the desired pitch.

While you press a step [1]–[16] button, part 1 will play at the pitch corresponding to the button you pressed. However, it will not play repeatedly.

The step [1]–[16] buttons correspond to different pitches as follows.

fig.pitchplay

shift	-2
Octave	-1		-12 -11 -10 -9 -8 -7 -6 -5 -4 -3 -2 -1 0 1 2
	0	-1 0 1 2 3 4 5 6 7 8 9 10 11 12
	1	11	12
	2

When you are finished with realtime pitch performance, press

the [LOOP CTRL] button so the indicator goes out.

51