Stereo Operation
For stereo operation connect the guitar to the Input of the RP250. Connect one cable to the RP250’s Left (Mono) output, and another cable to the RP250’s Right output. Connect one cable to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set the pan controls of the mixer channels hard left and right in order to retain stereo separation. If connecting to a mixer, set the Amp/Mixer switch to Mixer. If connecting to two amplifiers, set the Amp/Mixer switch to Amp.
Stereo Amp Setup
Guitar Amp Input/Effect Returns
Outputs
Amp/Mixer switch set to Amp.
Input
NOTE: When using a guitar amp, it may be best to connect the gui- tar to the Input of the RP250 and the Output of the RP250 to the effect return of the amplifier.
13