Pioneer VSX-74TXVI, VSX-72TXV, VSX-74TXVi-S Plugging in the receiver, AC outlet, FM wire antenna

Page 20

03Connecting your equipment

Important

• The signal ground ( ) is designed to reduce noise that occurs when an antenna is connected. It is not an electrical safety ground.

FM wire antenna

•Connect the FM wire antenna to the FM UNBAL 75Ω in the same way as the AM antenna.

For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.

Connecting external antennas

To improve FM reception connect an external FM antenna to the FM UNBAL 75Ω.

75Ω coaxial cable

ANTENNA

To improve AM reception, connect a 15–18 ft. length of vinyl-coated wire to the AM LOOP terminals without disconnecting the supplied AM loop antenna.

For the best possible reception, suspend horizontally outdoors.

Outdoor antenna

Indoor antenna

(vinyl-coated wire)

15–18 feet

(5–6 meters)

Plugging in the receiver

Only plug in after you have connected all your components to this receiver, including the speakers.

•Plug the AC power cord into a convenient AC power outlet.

Caution

•Handle the power cord by the plug part. Do not pull out the plug by tugging the cord, and never touch the power cord when your hands are wet, as this could cause a short circuit or electric shock. Do not place the unit, a piece of furniture, or other object on the power cord or pinch the cord in any other way. Never make a knot in the cord or tie it with other cables. The power cords should be routed so that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electric shock. Check the power cord once in a while. If you find it damaged, ask your nearest Pioneer authorized independent service company for a replacement.

•The receiver should be disconnected by removing the mains plug from the wall socket when not in regular use, e.g., when on vacation.

•Make sure the blue STANDBY/ON light has gone out before unplugging.

AC outlet

Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).

Caution

•Do not connect a TV set, monitor, heater, or similar appliance to this unit's AC outlet.

•Do not connect appliances with high power consumption to the AC outlet in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.

•Since a subwoofer or power amplifier can exceed the 100W maximum when playing sources at a high volume, this type of equipment should not be connected to the AC outlet.

20

En

Page 19 Page 21
Image 20
Page 19 Page 21
Contents VSX-72TXV VSX-72TXV-S Federal Communications Declaration of Conformity AddressPhone Keep in a Secure AREA. this is for Your SecurityImportant Safety Instructions Contents Other Settings Using other functionsControlling the rest of your system Additional informationBefore you start Automatically setting up for surround sound Mcacc Minute guideMinute guide Chapter Introduction to home theater02 5 minute guide EnterBetter sound using Phase Control Problems when using the Auto Mcacc SetupMinute guide Playing a sourceRear panel Connecting your equipmentConnecting your equipment Chapter About the video converter Connecting your equipmentWhen making cable connections Connecting your equipment Connecting your TV and DVD player Connecting a DVD/HDD recorder, VCR Or other set-top box Other video sourcesUse an optical cable for the connection VSX-74TXViUsing the component video jacks For a second recorder, use the DVR/VCR2 outputsUse a three-way component video cable DVD playerConnecting your equipment Connecting digital audio sources About the WMA9 Pro decoderConnecting your equipment Connecting analog audio sources Connecting a component to the front panel inputsSelect these inputs using Input Select remote or Input Selector dial front panel to selectConnecting your equipment Installing your speaker system Connecting the speakersSubwoofer Front Left Right CenterBanana plug connections Bare wire connectionsPlacing the speakers Connecting antennas THX speaker system setupAM loop antenna Assemble the stand as shown in the illustrationFM wire antenna Connecting external antennasPlugging in the receiver AC outletControls and displays Controls and displays ChapterFront panel STANDBY/ONOperating range of remote control unit Controls and displaysControls and displays Display Controls and displays Remote control ReceiverInput Select 6TUNE/ST /ENTERStatus MultiopeShift SourceListening to your system Listening to your system ChapterAuto playback Listening in surround soundUsing the Home THX modes Using the Advanced surround effectsTHX Games Mode Listening to your systemUsing Stream Direct Selecting Mcacc presetsChoosing the input signal Listening to your system Listening in stereoUsing surround back channel processing Using the Virtual Surround Back modeUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Select the setting you want to adjustSystem Setup menu PointSurround back speaker setting Make sure ‘OK’ is selected, then press EnterManual Mcacc setup Fine Channel LevelWhen youre finished, press Return Fine Speaker DistanceStanding Wave 10dB as necessarySelect ‘Standing Wave’ from the Manual Mcacc setup menu Select ‘EQ Adjust’ from the Manual Mcacc setup menuSelect the channels you want and adjust to your liking Acoustic Calibration EQHow to use Professional Acoustic Calibration EQ How to interpret the graphical outputSelect an option and press Enter Using Professional Acoustic Calibration EQSelect ‘EQ Professional’ then press Enter Data Management Checking Mcacc preset dataCopying Mcacc preset data Manual speaker setup Speaker SettingRenaming Mcacc presets Clearing Mcacc presetsSelect ‘Speaker Setting’ from the Manual SP Setup menu Select ‘Channel Level’ from the Manual SP Setup menuSelect a setup option Confirm your selected setup optionEnter Speaker DistanceBass Peak Level THX Audio Setting CurveConnecting an iPod Connecting your iPod to the receiverOther connections Other connections ChapterUsing XM Radio Connecting your XM Radio receiverOther connections Basic playback controlsUsing the XM Menu Saving channel presetsListening to channel presets Listening to XM RadioOther connections Connecting using Hdmi About HdmiOther connections Using the i.LINK interface VSX-74TXVi onlyYou will return to the Other Setup menu About i.LINKChecking the i.LINK inputs About Pqls rate controlUse standard RCA/phono jack cables for the connections Connecting the multichannel analog inputsSelecting the multichannel analog inputs Second Zone speaker B setup Switching the speaker system 2nd Zone setting only.1Bi-amping your front speakers Connect your speakers as shown belowOther connections Bi-wiring your speakers Connecting additional amplifiersSub room Input sources available Surround Back System multi-room setup ZoneMaking multi-room connections Press Control to select the sub rooms you want.2 Using the multi-room controlsSecondary multi-room setup Zone Connecting an IR receiver Multi-room remote controlsInput SelectPioneer plasma Using the SR+ mode with a Pioneer plasma display Pioneer plasmaDisplay DVD player Satellite receiver, etcOther connections Connecting a PC for Advanced Mcacc output Advanced Mcacc output using your PCInput Setup menu Other SettingsOther Settings Chapter Other Settings Other Setup menuInput function default and possible settings Select ‘Other Setup’ then press EnterOSD Adjustment Multi-Room and IR receiver setupSR+ Setup for Pioneer plasma displays Using other functions Using other functions ChapterSetting the AV options Setting What it does OptionsMaking an audio or a video recording Using other functionsPlaying a different source when recording Using the sleep timer Switching the speaker impedanceChecking your system settings Dimming the displayResetting the system Default system settingsDisplay shows RESET? Setting DefaultSetting the remote to control other components Selecting preset codes directlyProgramming signals from other remote controls Controlling the rest of your systemErasing one of the remote control button settings Resetting the remote control presetsConfirming preset codes Controlling the rest of your systemRenaming input source names Direct functionMulti Operation and System Off Programming a multi-operation or a shutdown sequenceUsing multi operations Using System offControlling the rest of your system Controls for TVs Controls for other componentsButtons Function Components TV CH +CH + Operating other Pioneer components with this unit’s sensorDecide which component you want to use the remote sensor Troubleshooting PowerAdditional information Additional information ChapterAdditional information Other audio problemsSymptomRemedy Video SettingsPhase Control feature 96kHz DisplayProfessional Calibration EQ graphical output Pqls OFF or Pqls on is Remote controlLink interface Message Explanation Link messagesUSB interface XM radio messages Symptom Cause ActionIPod messages Windows Media Audio 9 Professional Additional information Surround sound formatsDolby About THX Listening modes with different input signal formats Stereo 2 channel signal formatsStandard Auto SurroundMultichannel signal formats Input signal format StandardSurround Back speakers Input signal format Unavailable with only one surround back speaker connectedAdditional information Specifications Cleaning the unitFeatures Our philosophyPioneer Corporation ARB7334-A

VSX-72TXV, VSX-74TXVi-S, VSX-72TXV-S, VSX-74TXVI specifications

The Pioneer VSX-74TXVi and VSX-72TXV series are renowned for their exceptional sound quality and versatile features, making them a popular choice among audio enthusiasts and home theater aficionados. These models stand out for their advanced technologies and comprehensive functionalities, catering to both music and movie lovers.

The VSX-74TXVi is a high-performance receiver that supports a wide range of audio formats and provides impressive connectivity options. One of its main features is the incorporation of Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to experience studio-quality sound. The model also supports multi-channel audio setups, making it ideal for immersive 7.1 surround sound environments. The Automatic MCACC (Multi-Channel Acoustic Calibration System) optimizes the sound based on the room's acoustic characteristics, enhancing the overall listening experience.

On the other hand, the VSX-72TXV-S offers many similar features but focuses on delivering high-definition audio and video. With support for HDMI inputs, it facilitates easy switching between multiple HD sources while maintaining top-notch audio quality. The inclusion of 1080p video upscaling allows users to enjoy standard-definition content in much higher resolutions, enhancing picture clarity for a better viewing experience.

Both models boast Zone 2 and Zone 3 capabilities, enabling audio distribution to different areas of a home, thus providing flexibility for playing music in various rooms. They also feature a user-friendly interface with an on-screen display, allowing users to navigate through options with ease.

In addition to robust audio performance, these Pioneers are designed with a focus on aesthetic appeal and durability. Their sleek designs make them an elegant addition to any entertainment setup. The VSX-74TXVi and VSX-72TXV also include built-in amplifier technologies, ensuring efficient power delivery and reliable performance over extended periods.

The VSX series exemplifies Pioneer's commitment to quality and innovation, providing features that enhance the home entertainment experience while ensuring compatibility with modern technologies. Overall, these models embody a combination of versatility, high fidelity, and user-friendly functionality, making them standout choices for any home theater system.
Top Page Image Contents