Pioneer VSX-72TXV-S, VSX-74TXVI, VSX-74TXVi-S manual Connecting the multichannel analog inputs

Page 51

Other connections

The system will not work if the connected components form a loop. If a loop is detected, the message LOOP CONNECT shows in the display. Figs. 3 and 4 show connections that form a loop.

fig. 3

i.LINK cable

 

fig. 4

i.LINK cable

 

Another consideration when connecting i.LINK devices is the speed of the interface. At present there are three speeds; S100 (slowest), S200 and S400 (fastest). This receiver uses the S400 type. Although you can use components with different speeds together, we recommend connecting slower-speed components at the edge of the network if possible (shown by the shaded boxes in figs. 1 and 2). This will keep the network free of bottlenecks.

When used within an i.LINK network, this receiver must be on for the i.LINK connection to be maintained. Other components in the network may or may not maintain the connection in standby (none will when the power is completely off)—check the operating instructions supplied with individual components. Note that the audio may be momentarily interrupted if a component in the i.LINK network is switched on/off, or its i.LINK connection is switched on/off.

This product complies with the following i.LINK interface specifications:

1)IEEE Std. 1394a-2000, Standard for a High Performance Serial Bus

2)Audio and Music Data Transmission Protocol 2.0 Following the standard for AM824 sequence adaptation layers, the product is compatible with IEC60958 bitstream, DVD-A and SACD.

08

Connecting the multichannel analog inputs

For DVD Audio and SACD playback, your DVD player may have 5.1, 6.1 or 7.1 channel analog outputs (depending on whether your player supports surround back

channels).1 Make sure that the player is set to output multichannel analog audio.

1Connect the front, surround, center and subwoofer outputs on your DVD player to the corresponding MULTI CH input jack on this receiver.

Use standard RCA/phono jack cables for the connections.

2If your DVD player also has outputs for surround back channels, connect these to the corresponding MULTI CH input jacks on this receiver.

Use standard RCA/phono jack cables for the connections.

If there is a single surround back output, connect it to the SURROUND BACK L (Single) jack on this receiver.

Selecting the multichannel analog inputs

If you have connected a decoder or a DVD player as above, you must select the analog multichannel inputs

for surround sound playback.2

RECEIVER INPUT

SYSTEM OFF

SOURCE

SELECT

 

 

 

 

 

 

CD

 

TV

 

VIDEO 2

DVD SAT VIDEO1 TVCONT

1Make sure you have set the playback source to the proper output setting.

For example, you might need to set your DVD player to output multichannel analog audio.

2Use the INPUT SELECT button to select MULTI CH IN. You can also use the INPUT SELECTOR dial on the front panel.

Depending on the DVD player you’re using, the analog output level of the subwoofer channel may be too low. In this case switch the receiver into standby, then press STANDBY/ON while holding down VIDEO SELECT on the front panel. This switches between SW IN +10dB (increase of 10 decibels) and SW IN 0dB (default) in the subwoofer channel.

Note

1To listen to multichannel analog audio you’ll need to switch the input signal selector to MULTI CH INPUT (see Selecting the multichannel analog inputs above for more on this).

2• When playback from the multichannel inputs is selected, you can’t use Midnight/Loudness, Dialog Enhancement or the SIGNAL SELECT and ANA- LOG ATT buttons, as well as any of the listening modes (including STEREO and the surround back channel processing).

When playback from the multichannel inputs is selected, only the volume and channel levels can be set.

You can’t listen to your speaker B (Second Zone) system during playback from the multichannel inputs.

51

En

Image 51
Contents VSX-72TXV VSX-72TXV-S Keep in a Secure AREA. this is for Your Security Federal Communications Declaration of ConformityAddress PhoneImportant Safety Instructions Contents Additional information Other SettingsUsing other functions Controlling the rest of your systemBefore you start Introduction to home theater Automatically setting up for surround sound McaccMinute guide Minute guide ChapterEnter 02 5 minute guidePlaying a source Better sound using Phase ControlProblems when using the Auto Mcacc Setup Minute guideConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Connecting your equipment Connecting your TV and DVD player VSX-74TXVi Connecting a DVD/HDD recorder, VCROr other set-top box Other video sources Use an optical cable for the connectionDVD player Using the component video jacksFor a second recorder, use the DVR/VCR2 outputs Use a three-way component video cableAbout the WMA9 Pro decoder Connecting your equipment Connecting digital audio sourcesInput Selector dial front panel to select Connecting your equipment Connecting analog audio sourcesConnecting a component to the front panel inputs Select these inputs using Input Select remote orFront Left Right Center Connecting your equipment Installing your speaker systemConnecting the speakers SubwooferBare wire connections Placing the speakersBanana plug connections Assemble the stand as shown in the illustration Connecting antennasTHX speaker system setup AM loop antennaAC outlet FM wire antennaConnecting external antennas Plugging in the receiverSTANDBY/ON Controls and displaysControls and displays Chapter Front panelControls and displays Operating range of remote control unitControls and displays Display 6TUNE/ST /ENTER Controls and displays Remote controlReceiver Input SelectSource StatusMultiope ShiftListening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Using the Home THX modesUsing the Advanced surround effects THX Games ModeListening to your system Listening in stereo Using Stream DirectSelecting Mcacc presets Choosing the input signalUsing the Virtual Surround Back mode Using surround back channel processingListening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationAbcdefghijklmnopqrstuvwxyz Using the tuner Saving station presetsNaming station presets Listening to station presetsSelect the setting you want to adjust System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuPoint System Setup menuMake sure ‘OK’ is selected, then press Enter Surround back speaker settingFine Channel Level Manual Mcacc setup10dB as necessary When youre finished, press ReturnFine Speaker Distance Standing WaveAcoustic Calibration EQ Select ‘Standing Wave’ from the Manual Mcacc setup menuSelect ‘EQ Adjust’ from the Manual Mcacc setup menu Select the channels you want and adjust to your likingHow to interpret the graphical output How to use Professional Acoustic Calibration EQUsing Professional Acoustic Calibration EQ Select ‘EQ Professional’ then press EnterSelect an option and press Enter Checking Mcacc preset data Copying Mcacc preset dataData Management Clearing Mcacc presets Manual speaker setupSpeaker Setting Renaming Mcacc presetsConfirm your selected setup option Select ‘Speaker Setting’ from the Manual SP Setup menuSelect ‘Channel Level’ from the Manual SP Setup menu Select a setup optionSpeaker Distance Bass Peak LevelEnter Curve THX Audio SettingOther connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsBasic playback controls Using XM RadioConnecting your XM Radio receiver Other connectionsListening to XM Radio Using the XM MenuSaving channel presets Listening to channel presetsAbout Hdmi Other connections Connecting using HdmiVSX-74TXVi only Other connections Using the i.LINK interfaceAbout Pqls rate control You will return to the Other Setup menuAbout i.LINK Checking the i.LINK inputsConnecting the multichannel analog inputs Selecting the multichannel analog inputsUse standard RCA/phono jack cables for the connections Second Zone speaker B setup Connect your speakers as shown below Switching the speaker system2nd Zone setting only.1 Bi-amping your front speakersConnecting additional amplifiers Other connections Bi-wiring your speakersSurround Back System multi-room setup Zone Making multi-room connectionsSub room Input sources available Using the multi-room controls Secondary multi-room setup ZonePress Control to select the sub rooms you want.2 Select Connecting an IR receiverMulti-room remote controls InputPioneer plasma DVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAdvanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputOther Settings Other Settings ChapterInput Setup menu Select ‘Other Setup’ then press Enter Other SettingsOther Setup menu Input function default and possible settingsMulti-Room and IR receiver setup SR+ Setup for Pioneer plasma displaysOSD Adjustment Setting What it does Options Using other functionsUsing other functions Chapter Setting the AV optionsUsing other functions Playing a different source when recordingMaking an audio or a video recording Dimming the display Using the sleep timerSwitching the speaker impedance Checking your system settingsSetting Default Resetting the systemDefault system settings Display shows RESET?Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Programming signals from other remote controlsControlling the rest of your system Erasing one of the remote control button settingsResetting the remote control presets Confirming preset codesProgramming a multi-operation or a shutdown sequence Renaming input source namesDirect function Multi Operation and System OffUsing System off Using multi operationsTV CH + Controlling the rest of your system Controls for TVsControls for other components Buttons Function ComponentsOperating other Pioneer components with this unit’s sensor Decide which component you want to use the remote sensorCH + Additional information Chapter TroubleshootingPower Additional informationOther audio problems SymptomRemedyAdditional information Settings Phase Control featureVideo Display Professional Calibration EQ graphical output96kHz Remote control Link interfacePqls OFF or Pqls on is Link messages USB interfaceMessage Explanation Symptom Cause Action IPod messagesXM radio messages Additional information Surround sound formats DolbyWindows Media Audio 9 Professional About THX Auto Surround Listening modes with different input signal formatsStereo 2 channel signal formats StandardInput signal format Standard Multichannel signal formatsUnavailable with only one surround back speaker connected Surround Back speakers Input signal formatCleaning the unit Additional information SpecificationsOur philosophy FeaturesARB7334-A Pioneer Corporation

VSX-72TXV, VSX-74TXVi-S, VSX-72TXV-S, VSX-74TXVI specifications

The Pioneer VSX-74TXVi and VSX-72TXV series are renowned for their exceptional sound quality and versatile features, making them a popular choice among audio enthusiasts and home theater aficionados. These models stand out for their advanced technologies and comprehensive functionalities, catering to both music and movie lovers.

The VSX-74TXVi is a high-performance receiver that supports a wide range of audio formats and provides impressive connectivity options. One of its main features is the incorporation of Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to experience studio-quality sound. The model also supports multi-channel audio setups, making it ideal for immersive 7.1 surround sound environments. The Automatic MCACC (Multi-Channel Acoustic Calibration System) optimizes the sound based on the room's acoustic characteristics, enhancing the overall listening experience.

On the other hand, the VSX-72TXV-S offers many similar features but focuses on delivering high-definition audio and video. With support for HDMI inputs, it facilitates easy switching between multiple HD sources while maintaining top-notch audio quality. The inclusion of 1080p video upscaling allows users to enjoy standard-definition content in much higher resolutions, enhancing picture clarity for a better viewing experience.

Both models boast Zone 2 and Zone 3 capabilities, enabling audio distribution to different areas of a home, thus providing flexibility for playing music in various rooms. They also feature a user-friendly interface with an on-screen display, allowing users to navigate through options with ease.

In addition to robust audio performance, these Pioneers are designed with a focus on aesthetic appeal and durability. Their sleek designs make them an elegant addition to any entertainment setup. The VSX-74TXVi and VSX-72TXV also include built-in amplifier technologies, ensuring efficient power delivery and reliable performance over extended periods.

The VSX series exemplifies Pioneer's commitment to quality and innovation, providing features that enhance the home entertainment experience while ensuring compatibility with modern technologies. Overall, these models embody a combination of versatility, high fidelity, and user-friendly functionality, making them standout choices for any home theater system.