Pioneer VSX-72TXV-S, VSX-74TXVI manual Additional information, Other audio problems, SymptomRemedy

Page 75

Additional information

12

SymptomRemedy

No sound from surround back speakers.

•Check that the surround back speakers are set to LARGE or SMALL (see Speaker Setting on page 41).

•Make sure surround back processing is set to SBch ON (see Using surround back channel processing on page 29.

•If the source is Dolby Surround EX or DTS ES with no flag to indicate 6.1 compatibility, then with surround back processing set to SBch Auto, there will be no sound from the surround back speakers. In this case, set to SBch ON (see Using surround back channel processing on page 29).

•If the source does not have 6.1 playback channels, make sure that surround back processing is set to SBch ON and a surround mode is selected (see Listening in surround sound on page 26).

•Check the speaker connections (see Connecting the speakers on page 17). If only one surround back speaker is connected, make sure it’s connected to the left channel speaker terminal.

No sound from subwoofer.

• Check that the subwoofer is connected properly, switched on and the volume turned up.

 

• If your subwoofer has a sleep function, make sure it is switched off.

 

• Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 41).

 

• The crossover frequency may be set too low; try setting it higher to match the characteristics of your other

 

speakers (see Speaker Setting on page 41)

 

• If there is very little low frequency information in the source material, change your speaker settings to

 

Front: SMALL / Subwoofer: YES, or Front: LARGE / Subwoofer: PLUS (see Speaker Setting on page 41).

 

• Check that the LFE channel is not set to –80dB, or a very quiet setting (see Bass Peak Level on page 43).

 

• Check the speaker level settings (see Channel Level on page 42).

No sound from one speaker.

•Check the speaker connection (see Connecting the speakers on page 17).

•Check the speaker level settings (see Channel Level on page 42).

•Check that the speaker hasn’t been set to NO (see Speaker Setting on page 41).

•The channel may not be recorded in the source. By using one of the advanced effect listening mode, you may be able to create the missing channel (see Listening in surround sound on page 26).

Sound is produced from analog

• Check that the input signal type is set to DIGITAL (see Choosing the input signal on page 28).

components, but not from digital

• Make sure that the digital input is assigned correctly for the input jack the component is connected to

ones (DVD, LD, CD-ROM etc.).

(see The Input Setup menu on page 61).

 

• Check the digital output settings on the source component.

 

• If the source component has a digital volume control, make sure this is not turned down.

 

• Make sure that the multichannel analog inputs are not selected. Select any other input source.

 

 

No sound is output or a noise is

• Check that your DVD player is compatible with Dolby Digital/DTS discs.

output when Dolby Digital/DTS

• Check the digital output settings of your DVD player. Make sure that the DTS signal output is set to On.

software is played back.

• If the source component has a digital volume control, make sure this is not turned down.

No sound when using the System Setup or Status menu.

•If the HDMI input source is selected, sound is muted until exiting either menu.

•If sound is muted in the sub room (ROOM 2), it will be restored after exiting the System Setup menu.

Other audio problems

Symptom

Remedy

Broadcast stations cannot be

For FM broadcasts

selected automatically, or there is

• Fully extend the FM wire antenna, adjust the position for best reception and secure to a wall, etc.

considerable noise in radio

• Use an outdoor antenna for better reception (see page 20).

broadcasts.

For AM broadcasts

 

• Adjust the position and direction of the AM antenna.

 

• Use an outdoor antenna for better reception (see page 20).

 

• Noise may be caused by interference from other equipment, such as a fluorescent light, motor, etc.

 

Switch off or move the other equipment, or move the AM antenna.

 

 

A multichannel DVD source

• Make sure that the multichannel analog inputs are selected (see Selecting the multichannel analog inputs

appears to be downmixed to 2

on page 51).

channels during playback.

 

Noise is output when scanning a • This is not a malfunction of the receiver. The scan function of your player alters the digital information,

DTS CD.

making it unreadable, resulting in noise being output. Lower the volume when scanning.

 

 

When playing a DTS format LD

• Make sure that the input signal type is set to DIGITAL (see Choosing the input signal on page 28).

there is audible noise on the

 

soundtrack.

 

 

 

75

En

Page 74 Page 76
Image 75
Page 74 Page 76
Contents VSX-72TXV VSX-72TXV-S Keep in a Secure AREA. this is for Your Security Federal Communications Declaration of ConformityAddress PhoneImportant Safety Instructions Contents Additional information Other SettingsUsing other functions Controlling the rest of your systemBefore you start Introduction to home theater Automatically setting up for surround sound McaccMinute guide Minute guide ChapterEnter 02 5 minute guidePlaying a source Better sound using Phase ControlProblems when using the Auto Mcacc Setup Minute guideConnecting your equipment Connecting your equipment ChapterRear panel Connecting your equipment When making cable connectionsAbout the video converter Connecting your equipment Connecting your TV and DVD player VSX-74TXVi Connecting a DVD/HDD recorder, VCROr other set-top box Other video sources Use an optical cable for the connectionDVD player Using the component video jacksFor a second recorder, use the DVR/VCR2 outputs Use a three-way component video cableAbout the WMA9 Pro decoder Connecting your equipment Connecting digital audio sourcesInput Selector dial front panel to select Connecting your equipment Connecting analog audio sourcesConnecting a component to the front panel inputs Select these inputs using Input Select remote orFront Left Right Center Connecting your equipment Installing your speaker systemConnecting the speakers SubwooferBare wire connections Placing the speakersBanana plug connections Assemble the stand as shown in the illustration Connecting antennasTHX speaker system setup AM loop antennaAC outlet FM wire antennaConnecting external antennas Plugging in the receiverSTANDBY/ON Controls and displaysControls and displays Chapter Front panelControls and displays Operating range of remote control unitControls and displays Display 6TUNE/ST /ENTER Controls and displays Remote controlReceiver Input SelectSource StatusMultiope ShiftListening in surround sound Listening to your systemListening to your system Chapter Auto playbackListening to your system Using the Home THX modesUsing the Advanced surround effects THX Games ModeListening to your system Listening in stereo Using Stream DirectSelecting Mcacc presets Choosing the input signalUsing the Virtual Surround Back mode Using surround back channel processingListening to the radio Using the tunerUsing the tuner Chapter Tuning directly to a stationAbcdefghijklmnopqrstuvwxyz Using the tuner Saving station presetsNaming station presets Listening to station presetsSelect the setting you want to adjust System Setup menuSystem Setup menu Chapter Making receiver settings from the System Setup menuPoint System Setup menuMake sure ‘OK’ is selected, then press Enter Surround back speaker settingFine Channel Level Manual Mcacc setup10dB as necessary When youre finished, press ReturnFine Speaker Distance Standing WaveAcoustic Calibration EQ Select ‘Standing Wave’ from the Manual Mcacc setup menuSelect ‘EQ Adjust’ from the Manual Mcacc setup menu Select the channels you want and adjust to your likingHow to interpret the graphical output How to use Professional Acoustic Calibration EQUsing Professional Acoustic Calibration EQ Select ‘EQ Professional’ then press EnterSelect an option and press Enter Checking Mcacc preset data Copying Mcacc preset dataData Management Clearing Mcacc presets Manual speaker setupSpeaker Setting Renaming Mcacc presetsConfirm your selected setup option Select ‘Speaker Setting’ from the Manual SP Setup menuSelect ‘Channel Level’ from the Manual SP Setup menu Select a setup optionSpeaker Distance Bass Peak LevelEnter Curve THX Audio SettingOther connections Chapter Connecting an iPodConnecting your iPod to the receiver Other connectionsBasic playback controls Using XM RadioConnecting your XM Radio receiver Other connectionsListening to XM Radio Using the XM MenuSaving channel presets Listening to channel presetsAbout Hdmi Other connections Connecting using HdmiVSX-74TXVi only Other connections Using the i.LINK interfaceAbout Pqls rate control You will return to the Other Setup menuAbout i.LINK Checking the i.LINK inputsConnecting the multichannel analog inputs Selecting the multichannel analog inputsUse standard RCA/phono jack cables for the connections Second Zone speaker B setup Connect your speakers as shown below Switching the speaker system2nd Zone setting only.1 Bi-amping your front speakersConnecting additional amplifiers Other connections Bi-wiring your speakersSurround Back System multi-room setup Zone Making multi-room connectionsSub room Input sources available Using the multi-room controls Secondary multi-room setup ZonePress Control to select the sub rooms you want.2 Select Connecting an IR receiverMulti-room remote controls InputPioneer plasma DVD player Satellite receiver, etc Using the SR+ mode with a Pioneer plasma displayPioneer plasma DisplayAdvanced Mcacc output using your PC Other connections Connecting a PC for Advanced Mcacc outputOther Settings Other Settings ChapterInput Setup menu Select ‘Other Setup’ then press Enter Other SettingsOther Setup menu Input function default and possible settingsMulti-Room and IR receiver setup SR+ Setup for Pioneer plasma displaysOSD Adjustment Setting What it does Options Using other functionsUsing other functions Chapter Setting the AV optionsUsing other functions Playing a different source when recordingMaking an audio or a video recording Dimming the display Using the sleep timerSwitching the speaker impedance Checking your system settingsSetting Default Resetting the systemDefault system settings Display shows RESET?Controlling the rest of your system Setting the remote to control other componentsSelecting preset codes directly Programming signals from other remote controlsControlling the rest of your system Erasing one of the remote control button settingsResetting the remote control presets Confirming preset codesProgramming a multi-operation or a shutdown sequence Renaming input source namesDirect function Multi Operation and System OffUsing System off Using multi operationsTV CH + Controlling the rest of your system Controls for TVsControls for other components Buttons Function ComponentsOperating other Pioneer components with this unit’s sensor Decide which component you want to use the remote sensorCH + Additional information Chapter TroubleshootingPower Additional informationOther audio problems SymptomRemedyAdditional information Settings Phase Control featureVideo Display Professional Calibration EQ graphical output96kHz Remote control Link interfacePqls OFF or Pqls on is Link messages USB interfaceMessage Explanation Symptom Cause Action IPod messagesXM radio messages Additional information Surround sound formats DolbyWindows Media Audio 9 Professional About THX Auto Surround Listening modes with different input signal formatsStereo 2 channel signal formats StandardInput signal format Standard Multichannel signal formatsUnavailable with only one surround back speaker connected Surround Back speakers Input signal formatCleaning the unit Additional information SpecificationsOur philosophy FeaturesARB7334-A Pioneer Corporation

VSX-72TXV, VSX-74TXVi-S, VSX-72TXV-S, VSX-74TXVI specifications

The Pioneer VSX-74TXVi and VSX-72TXV series are renowned for their exceptional sound quality and versatile features, making them a popular choice among audio enthusiasts and home theater aficionados. These models stand out for their advanced technologies and comprehensive functionalities, catering to both music and movie lovers.

The VSX-74TXVi is a high-performance receiver that supports a wide range of audio formats and provides impressive connectivity options. One of its main features is the incorporation of Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to experience studio-quality sound. The model also supports multi-channel audio setups, making it ideal for immersive 7.1 surround sound environments. The Automatic MCACC (Multi-Channel Acoustic Calibration System) optimizes the sound based on the room's acoustic characteristics, enhancing the overall listening experience.

On the other hand, the VSX-72TXV-S offers many similar features but focuses on delivering high-definition audio and video. With support for HDMI inputs, it facilitates easy switching between multiple HD sources while maintaining top-notch audio quality. The inclusion of 1080p video upscaling allows users to enjoy standard-definition content in much higher resolutions, enhancing picture clarity for a better viewing experience.

Both models boast Zone 2 and Zone 3 capabilities, enabling audio distribution to different areas of a home, thus providing flexibility for playing music in various rooms. They also feature a user-friendly interface with an on-screen display, allowing users to navigate through options with ease.

In addition to robust audio performance, these Pioneers are designed with a focus on aesthetic appeal and durability. Their sleek designs make them an elegant addition to any entertainment setup. The VSX-74TXVi and VSX-72TXV also include built-in amplifier technologies, ensuring efficient power delivery and reliable performance over extended periods.

The VSX series exemplifies Pioneer's commitment to quality and innovation, providing features that enhance the home entertainment experience while ensuring compatibility with modern technologies. Overall, these models embody a combination of versatility, high fidelity, and user-friendly functionality, making them standout choices for any home theater system.
Top Page Image Contents