Pioneer VSX-74TXVI manual Data Management, Checking Mcacc preset data, Copying Mcacc preset data

07The System Setup menu

After the Acoustic Calibration Equalization is set, you are given the option to check the settings on-screen.

Data Management

This system allows you to store up to six MCACC presets, allowing you to calibrate your system for different listening positions (or frequency adjustments for the

same listening position).1 This is useful for alternate settings to match the kind of source you’re listening to and where you’re sitting (for example, watching movies from a sofa, or playing a video game close to the TV).

From this menu you can check your current settings, copy from one preset to another, name presets for easier identification and clear any ones you don’t need.

1Select ‘Data Management’ from the System Setup menu.

See Making receiver settings from the System Setup menu above if you’re not already at this screen.

System Setup			4.Data Management
	1.Auto	MCACC
				a.MCACC	Data	Check
	2.Surr	Back System		b.MCACC	Data	Copy
	3.Manual MCACC			c.Memory	Rename
	4.Data	Management		d.Memory	Clear
	5.Manual SP Setup
	6.Input	Setup
	7.Other	Setup
		: Exit				:Return

2Select the setting you want to adjust.

•MCACC Data Check – Check the settings for any of your MCACC presets using the on-screen display (see Checking MCACC preset data below).

1Select ‘MCACC Data Check’ from the Data Management setup menu.

4.Data Management				4a.MCACC Data Check
	a.MCACC	Data	Check
	b.MCACC	Data	Copy		1.Speaker Setting
	c.Memory	Rename			2.Channel	Level
	d.Memory	Clear			3.Speaker	Distance
					4.Standing	Wave
					5.Acoustic	Cal EQ
			:Return	ENTER:Next		:Return

2Select the setting you want to check.

•It is useful to do this while a source is playing so you can compare the different settings.

3Select the MCACC preset that you want to check.

Use the	buttons if necessary to switch speakers/
settings.
		4a4.EQ		Data			Check
									63Hz	: +1.0
			MCACC			M1			125Hz	: +5.5
			Ch			[SBL]		250Hz		: -3.0
									500Hz	: 0.0
									1kHz	+ 12.0
									2kHz	: +5.5
									4kHz	: -3.0
									8kHz	: 0.0
									16kHz : +7.0
			63 125 250 500 1k	2k	4k 8k 16k		TRM
									TRIM : -2.5
									:Return

4Press RETURN to go back to the Data Check menu, repeating steps 2 and 3 to check other settings.

4a2.Speaker		Distance		4a3.Standing			Wave
MCACC				MCACC
	M1. MEMORY 1					M1. MEMORY 1
L	: 10.5ft			Sranding		Wave Control
C	:	9.0ft					:	ON
R	: 10.0ft			Filter	Ch		[ SUB W. ]
SR	:	8.5ft		TRIM			:+12.0dB
SBR	:	7.0ft		No.	1			2	3
SBL	:	8.0ft		f	: 110Hz		: 110Hz		: 110Hz
SL	:	8.0ft		Q	: 3.0		:	3.0	: 3.0
SW	: 11.5ft			A	: 12.0dB : 10.0dB				: 12.0dB
				T
				T
			:Return						:Return

•MCACC Data Copy – Copy settings from one MCACC preset to another (see Copying MCACC preset data below).

•Memory Rename – Name your MCACC presets for easy identification (see Renaming MCACC presets below).

•Memory Clear – Clear any MCACC presets that you don’t want (see Clearing MCACC presets below).

Checking MCACC preset data

After you have completed Automatically setting up for surround sound (MCACC) on page 7 or Automatic MCACC (Expert) on page 32, you can check your calibrated settings using the on-screen display.

5 When you're finished, press RETURN.

You will return to the Data Management setup menu.

Copying MCACC preset data

If you want to manually adjust the Acoustic Calibration EQ (see Manual MCACC setup above), we recommend

copying your current settings2 to an unused MCACC preset. Instead of just a flat EQ curve, this will give you a reference point from which to start.

1Select ‘MCACC Data Copy’ from the Data Management setup menu.

4.Data Management				4b.MCACC Data		Copy
	a.MCACC	Data	Check	From
	b.MCACC	Data	Copy	[	M1. MEMORY 1		]
	c.Memory	Rename		To
	d.Memory	Clear		[ M2. MEMORY 2 ]
				Start Copy		[Cancel ]
			:Return			:Cancel

Note

1This can be done in Automatically setting up for surround sound (MCACC) on page 7 or Automatic MCACC (Expert) on page 32, either of which you should have already completed.

2The settings made in Automatically setting up for surround sound (MCACC) on page 7 or Automatic MCACC (Expert) on page 32.

40

En