Fender 22 manual Rear Panel, Specifications

Rear Panel

L.	POWER—Switches the unit ON-OFF. You can extend the life of	P.	MAIN SPEAKER / EXTENSION SPEAKER—
	the amplifier tubes by keeping the STANDBY {M} switch down	INTERNAL	EXTERNAL A speaker MUST be plugged into the INTERNAL SPEAKER
	for the first 60 seconds that the power is ON.
M. STANDBY—In standby, the amplifier outputs are disabled			jack when the Super–Sonic amplifier is ON or damage may
			occur. Switch the amplifier OFF, or to STANDBY while chang-
	while power is supplied only to the tube filaments, keeping		ing speaker connections.
	them warm. *Tip: Use STANDBY instead of switching the power
	off during short breaks to extend the life of the tubes and	•	Keep the internal speaker connected to the INTERNAL SPEAKER
	avoid the tube warm-up delay upon returning to play.
			jack for normal operation.
N.	IEC POWER INPUT SOCKET—Connect to a grounded outlet	Q.	FOOTSWITCH—Connect the included 4-button footswitch to
	using the supplied power cord in accordance with the voltage
			enable remote selection of: Amp Voicing, Channel, FX Loop
	and frequency specified on the rear panel of your amplifier.
			Bypass and Reverb. NOTE: The front panel pushbuttons are dis-
O.	FUSE—Protects the amplifier from electrical faults. Only		abled when the footswitch is connected.
	replace a blown fuse with the type and rating specified on the	R.	SEND / RETURN—Effects loop jacks. Connect SEND to your

rear panel of your amplifier. effects input and connect RETURN to the effects output.

Specifications

TYPE:	PR 904
PART NUMBERS:	2160000x00* (120V, 60Hz)	2160001x00* (110V, 60Hz) TW	2160003x00* (240V, 50Hz) AUS	2160004x00* (230V, 50Hz) UK
	2160005x00* (220V, 50Hz) ARG	2160006x00* (230V, 50Hz) EUR	2160007x00* (100V, 50Hz) JPN	2160009x00* (220V, 60Hz) ROK
*(Super-Sonic 22 amplifier exterior color code: Black "x"=0, Blonde "x"=4)
POWER REQUIREMENT:	120W
POWER AMP OUTPUT:	22W RMS @ 5% THD, 1kHz sine into 8Ω
INPUT IMPEDANCE:	1MΩ
OUTPUT IMPEDANCE:	8Ω
FUSES	100V-120V UNITS: F 2A L, 250V
	220V-240V UNITS: F 1A L, 250V
FOOTSWITCH (INCLUDED):	4-button, (P/N 0078324000) Voicing / Channel / FX on-off / Reverb
SPEAKERS:	One 8Ω, 12" Fender Special Design speaker by Eminence® (P/N 0079527000)
DIMENSIONS:	HEIGHT: 17.5 in (44.5 cm)
	WIDTH: 24 in (61.0 cm)
	DEPTH: 8.5 in (21.6 cm)
WEIGHT:	40 lb (18.1 kg)

Product specifications are subject to change without notice.

fender.com 7