Pioneer VSX-37TX Multi CH Input See p.40, Tone control buttons Tone button, Channel Select button

Displays & Controls

1	2	3	4	5	6	7	8	9
								VSX-36TX
		NºmÀ²>õm						PREPARATION
							1
	G
						E
		E	E			E
10	11	12		13	14	15		16

3MULTI CH INPUT (See p.40, 51)

Use to hook up an external component that can decode other types of signals and input them into the VSX-37TX/36TX.

4TONE control buttons

TONE button

This button has two functions. Firstly, it switches between TONE ON and TONE BYPASS, which bypasses the tone circuitry. Secondly, you need to press the button before using the CHANNEL SELECT buttons to adjust the BASS & TREBLE (cannot be used in THX or MULTI CH IN modes).

CHANNEL SELECT button

Switches the tone adjust controls between the FRONT, CENTER, SURROUND and SUR- ROUND BACK speakers. You can then use the BASS and TREBLE controls to adjust the sound.

BASS (–/+) button (See p.50)

Use to adjust low frequencies.

TREBLE (–/+) button (See p.50)

Use to adjust the high frequencies.

5LOUDNESS button (See p.49)

Switches the LOUDNESS mode on or off (cannot be used in THX or MULTI CH IN modes).

DIGITAL NR button (See p.48)

Switches the DIGITAL NR on or off (cannot be used in THX or MULTI CH IN modes).

SIGNAL SELECT button (See p.47)

Use to select the type of signal being input into the receiver. Press SIGNAL SELECT repeatedly to select one of the following:

ANALOG – To select an analog signal.

DIGITAL – To select a optical or coaxial digital signal.

AC-3 RF (VSX-37TX only) – To select an 2RF signal.

AUTO – This is the default. If there are analog, digital and 2RF signals input, the receiver automatically selects the 2RF signal. If there are analog and digital signals input the digital will be selected.

FL DIMMER button (See p.52)

Use to adjust the brightness of the main display.

6Display (See p.25)

7Remote sensor

Point the remote control toward the remote sensor to operate the receiver.

8MULTI-ROOM & SOURCE button (See p.78-82)

Press to use the multi room feature (requires an optional PIONEER Multi-Room Remote Sensor Unit MR-100 or another IR receiver).

CONTROL button (See p.78-82): Used together with the INPUT SELECTOR to select the function or use with the MASTER VOLUME to select the volume of the MULTI ROOM system.

23