Pioneer VSX-36TX, VSX-37TX manual Adjusting Bass and Treble

Page 50

Basic Playback

Adjusting Bass and Treble

You can use BASS +/– or TREBLE +/– buttons to adjust the low and high frequencies for each individual set of speakers. If the receiver is in STEREO mode you can only adjust the FRONT speakers. In a surround mode (STANDARD, ADVANCED THEATER, etc.) you can adjust the FRONT, CENTER, SURROUND and SURROUND BACK speakers. The TONE button can also be used to bypass the tone circuitry (see p.22).

1	2
	NºmÀ²³õm
	3

1Press the TONE button on the front panel to put the receiver in tone TONE: ON mode.

2Press the CHANNEL SELECT button on the

front panel to cycle through the different tone adjust modes.

The button cycles though the possibilities in the following order:

TONE Front TONE Center

TONE SurBack TONE Surr.

3Use the BASS or TREBLE (+/–) buttons to adjust the low or high frequencies of each channel.

A few seconds after you finish adjusting the tone the receiver will revert to the sound mode it was in at the beginning of the process.

	memo	• The tone control can be adjusted in a range of ±6 dB.
	memo	• The tone control cannot be adjusted in THX and MULTI CH
		• The tone control cannot be adjusted in THX and MULTI CH
		IN modes.
		• If the receiver is in DIRECT mode and you press the TONE
		button, TONE BYPASS will appear in the display, letting you
		know that you can't change the tone in DIRECT mode. An-
		other press cancels DIRECT mode.

50

Image 50

Contents VSX-37TXVSX-36TX For Canadian model For U.S. modelImportant Notice Information to UserImportant Safety Instructions Coaxial Digital Connection Quick Start GuideHooking Up Your DVD Player & TV Optical Digital ConnectionQuick Start Guide Setting up the Remote Control & UnitSpeaker Connections Use the 2 or 3 buttons to choose the DVD/LD setting Set the remote control slide switch to SetupPress the System Setup button Digital Input AssignmentYou should see DVD/LD in the display on the receiver Playing a DVD with Surround SoundFor Better Surround Sound For more information see pagesFeatures Table of Contents Preparing the Remote Control Checking the Supplied AccessoriesHow to Use This Manual Before You StartOpening the Front Panel Installing the ReceiverOperating range of remote control unit Inches 20 cmAudio Components Connecting Your EquipmentCassette deck placement Analog audio/video cordsDigital Connections Coaxial cords/Optical cablesExample Connection for a DVD/LD or LD player Default settingsVSX-36TX model When playing LD recorded in Dolby Digital Digital Input AssignmentVideo Components Connecting DVD/LD playersConnecting VCRs or DVRs LD player onlyOr standard video cord Satellite TV ComponentsDigital audio coaxial cords Optical cables TV/Satellite tuner5.1 channel analog output jack Multi Channel Input External DecoderComponents equipped with FM wire antenna AM loop antenna Connecting the Radio AntennasUsing external antennas To improve FM receptionSpeakers Speaker terminalsSpeaker impedance Speaker placementPlacing Your Speakers First turn the receiver off, then press the STANDBY/ONConnecting Additional Amplifiers PluggingDisplays & Controls Front PanelTone control buttons Tone button Signal Select button See p.47Multi CH Input See p.40 Channel Select buttonPhones jack Source indicators VSX-37TX onlyInput Selector dial Video Input jacks See p.15Display Remote Control Remote Setup button when Setup mode is selected Master Volume buttonsInput ATT button when USE mode is selected System SET UP button when Setup mode is selectedInitial Set Up On Screen DisplayPress the System Setup button Setting Up for Surround SoundSet the slide switch to Setup Speaker Setting See p.32-33Go on to the next page to continue set up Isnt use the 5´ buttons to select it Digital-In SelectDigital in Select should be selected if it Choose a Digital in and assign it an input´ buttons then press the Enter button Speaker SettingSelect a speaker setting mode with the 2´3 Buttons then press the buttonMenu Setup Menu Tone will be output Select a Test Tone modeChannel Level Previous screen When you have adjusted each speaker levelPress Enter button to return to Select Exit with the 5/ buttons and pressSelect Crossover Network if Select Exit to return to the System Setup MenuCrossover Network Continuing from Channel LEVEL, it willBass Peak Level Select Setting Start Press the Enter buttonThis completes the speaker setup Output the test tone for the LFE channelDynamic Range Control Default setting is OFFIf listening at loud volumes we recommend turning Use the 2 or 3 arrows to choose OFF, MID or MAXChannel Sound Modes Standard modeBasic Playback Home THX Cinema mode Advanced Theater modesStereo mode DSP modesSelecting a Sound Mode CH SELPlaying Sources with Dolby Digital or DTS Sound Playing Stereo Sources Press the STEREO/DIRECT button to select the stereo modeStereo indicator lights on the display Press the Receiver button to turn on the receiverVSX-36TX model Switching Analog and Digital Signal InputEach press switches the signal in the order below Stereo excluding 96 kHz Analog input Each press switches Digital NR on or offReducing Noise During Playback Digital inputEach press switches Midnight Listening mode on or off Listening in Midnight ModeListening the Loudness Mode Press the Midnight buttonAdjusting Bass and Treble Multi Channel in Playback KHz 24 bit PerformancePress the FL Dimmer button Adjusting the Brightness of the DisplayDirect Playback Dual Mono Setting Put the receiver in Standby modeFor Automatic Tuning Using the TunerAutomatic and Manual Tuning For Manual TuningExample Direct Access TuningTo cancel before inputting the frequency Press the Memory button to activate the memory function Memorizing Frequently Used StationsTune in the desired station Press the Class button repeatedly to select a class numberRecalling Memorized Stations Setup Remote Control of Other ComponentsSetting Up the Remote Control to Control Other Components Press the 2´3 buttons to choose Press the Multi Control button forComponent you want to control Function and then press the 5´ buttonsRemote Control of Other Components Learning Commands from Other Remote ControlsPress the Remote Setup button Remote SET UP menu appears on your TV screenPress the button to be programmed Enter Side A/B Using the Remote Control with Other ComponentsSource = MenuEnter TV/VCR VCR & DVD Recorder OperationsChannel -/+ Press to start recording CD-R only CD & CD-R Player OperationsDisc MD Operations Disc DISP/CHARAExit STB satellite tuner OperationsGuide Enter CH Enter TV OperationsChannel -/+ For Digital TVs ÷7÷3÷8÷1 BLUE/GREEN/REDPress to fast forward the tape Cassette Deck OperationsPress to rewind the tape Using Other Functions Recording from Audio ComponentsRecording from Digital Audio Components Recording from Video ComponentsSelect a Multi Control button for this To cancel here, press Remote SetupMulti Operations Multi OperationRepeat steps 4 and 5 to input Multi Mode THX, ADVANCED, StandardStereo by inputting that command for OPERATIONs to the Multi ControlSystem Off Select a component by pressing its Multi Control button Setting Up the Direct FunctionUsing the System Off Button Resetting the Remote Control Remote Back LightErasing Learned Remote Control Commands Erasing All Learned Commands and Preset CodesVideo Select MULTI-ROOM connections Set up exampleMulti-Room Sub room Main roomSelect the Volume Level by using the 2´3 buttons MULTI-ROOM set upPress System Setup on the remote control Also make sure that the TV is on and set to the receiverSelector Press a Function button to select the sub function Using the remote control with the MULTI-ROOM systemPress Volume +/- to adjust the volume Receiver from the sub roomPioneer SR System Operating other Pioneer components Laser disc format Techno Tidbits & Problem-solvingDolby Digital Comparison with Dolby Pro Logic SurroundTechno Tidbits & Problem-solving DTSPreset Code List Techno Tidbits & Problem-solvingTroubleshooting Symptom Cause RemedyAnalog DTS Techno Tidbits & Problem-solving EIA ListeningSpecifications Furnished Parts Power cord CautionMaintenance of External Surfaces 0 4 2 1 1 4 0